Popular Post pkinneb Posted November 5 Popular Post Report Posted November 5 Anyone on the form have any experience with the Laguna drill presses? Kev has one and really likes it and has provided some valuable insights but thought I would throw up a post to see if anyone else has experience or opinions? One question I have is they offer a 110 and 220 version any thoughts on why one would want/ need a 220V DP? Other than Voltage and HP they appear to be identical. As I have mentioned I am getting ready to retire and my company is asking if I need any tools. They only thing I have never upgraded is my 30 year old Delta DP which is still going strong but if they want to buy me a new tool who am I to stop them 4 Quote
Popular Post Chet Posted November 5 Popular Post Report Posted November 5 Maybe they just offer the 220 is for commercial businesses in that it just may be the way their shop is wired. 3 1 Quote
drzaius Posted November 6 Report Posted November 6 The 240V model would be advantageous if it was a long run to the panel. I have a 120V, 1.5HP DP and it has never lacked for power and has never tripped the breaker. 1 1 Quote
Von Posted November 6 Report Posted November 6 It's been a long time since my college electrical engineering power distribution class, but my recollection is basically high voltage means lower amps, which is advantageous as that means less load on the wiring, mainly in large-scale power distribution, and also, as drzaius points out, even over a long run in the shop. Since higher voltage tends to mean commercial, I suspect they will often build in more power but that's not a direct result of the higher voltage. (Perhaps easier to achieve with higher voltage?) Three-phase has a similar benefit, if you get things tuned right (capacitance vs inductance), you can really cut the amps flowing over the transition line. You will find cases where capacitance or inductance has been added outside a building to help balance the load. 1 Quote
Ron Swanson Jr. Posted November 6 Report Posted November 6 Is the motor the same size, or is the 220v larger? The only reason I can think of in WW is if you're running massive bits and like boring out logs or something. For furniture and the vast majority of what we do, 120v is plenty enough. 1 Quote
pkinneb Posted November 6 Author Report Posted November 6 Thanks all! Pretty much in sync with my thinking just wanted to insure I wasn't missing something Quote
JustAnotherGuy Posted November 6 Report Posted November 6 The 220V version generally offers more motor power and may handle larger bits, deeper drilling, and tougher materials with less strain. 1 1 Quote
Popular Post gee-dub Posted November 7 Popular Post Report Posted November 7 As my EE buddy says "watts is watts". Some folks put forward that 240v motors start up faster but there is so much more involved in motor design than just voltage, amps, and watts. I ran a tablesaw that was 120v or 240v. I ran it at 240v for years then I needed that outlet and didn't want to run a new one. I converted it to 120v to free up the 240v outlet and never noticed a bit of difference. JME. As you get to higher horsepowers 240v or even 3-phase start to make sense. 3 1 Quote
Popular Post Mark J Posted November 7 Popular Post Report Posted November 7 On 11/5/2026 at 3:39 PM, pkinneb said: my company is asking if I need any tools. How do we get jobs at this company! 3 Quote
Mark J Posted November 7 Report Posted November 7 @pkinneb, are you looking at a traditional drill press, or are you considering Laguna's new digital/electronic DP? I have the Nova Voyager and I really like the electronic features, particularly the depth control. I'm not sure how the two compare. Quote
Popular Post Mark J Posted November 7 Popular Post Report Posted November 7 When it comes to driving large bits, I think the limiting factor for a drill press is not motor HP, but the capability of the chuck (and arbor). With very large bits, like a 2 or 3 inch Forstner, the 1/2" chuck is maxed out, and barely able to grip the 1/2" shank of the bit, which then spins in the chuck. I swapped my OEM 1/2" chuck for a 5/8" from Jacobs (I went keyless, too). The chuck's grip is much improved, but now I have to be careful that the chuck doesn't slip on the arbor. I still am happy I made the upgrade. With large diameter holes I always start with a smaller bit and work my way up to size in one or two steps. 2 1 Quote
pkinneb Posted November 7 Author Report Posted November 7 On 11/7/2026 at 8:44 AM, Mark J said: @pkinneb, are you looking at a traditional drill press, or are you considering Laguna's new digital/electronic DP? I have the Nova Voyager and I really like the electronic features, particularly the depth control. I'm not sure how the two compare. Digital version. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.