TerryMcK Posted November 1, 2012 Report Posted November 1, 2012 Anybody have any recommendations for a good RO sander that isn't as expensive as a Festool? Maybe something in the mid range hobby shop market. Metabo, Bosch, De Walt etc. Quote
robjeffking Posted November 1, 2012 Report Posted November 1, 2012 Bosch or Makita, try to get a model with a rubber boot over the switch fine dust builds up in between the contacts and heat destroys the switch. Quote
pghmyn Posted November 1, 2012 Report Posted November 1, 2012 I have a Porter Cable, and I would absolutely recommend it to ANYONE. I think my dad paid $100 for it. The dust collection bag is terrible because it always fell off in the middle of sanding. But, if you're like me, you will hook it up straight to your vacuum. Once I tried this sander with dust extraction hooked up, I never looked back. I am not over exaggerating when I say I have not seen dust in the air since. Quote
Jfitz Posted November 1, 2012 Report Posted November 1, 2012 I have a Milwaukee 6021 variable speed ROSand it seems to do a good job, especially when attached to a vac. It's a lot of bang for the buck at $59 at HD. Quote
UglySteve Posted November 1, 2012 Report Posted November 1, 2012 I have enjoyed my ridgid 6" ROS. Also my old dewalt 5". The newer dewalt not so much. My Bosch 5" is terrible. It's almost impossible to control. Quote
duckkisser Posted November 2, 2012 Report Posted November 2, 2012 got a de walt from craftsman and i realy like it still looking for dust to come from my sander. Quote
dtrust Posted November 2, 2012 Report Posted November 2, 2012 The low profile Porter Cable one is great. Very low vibration, dust control is wonderful hooked to a vac, and about $100. Quote
TRBaker Posted November 2, 2012 Report Posted November 2, 2012 I've been using Dewalt for years now and all I've ever had to replace are the mounting pads on occasion. My buddy sells both PC and Dewalt and says the PC is okay if you don't use anything greater than 120 grit. Otherwise, they wear out quick and a lot of cabinet shops have stopped using them as a result. I've used up to 60 grit on my Dewalt and it's still humming along. I think I paid $89.00 for mine, about twelve years ago. 1 Quote
mds2 Posted November 2, 2012 Report Posted November 2, 2012 I bought a Dewalt about 6 months ago for around $60. I'm very happy with and dust collection is great with a vac. I never use the dust bags on anything, I think they are pretty much worthless. Quote
Dave's Not Here Posted November 2, 2012 Report Posted November 2, 2012 I have a number of ROS's and my two favorites are the Porter Cable 333(discontinued) and the DeWalt D26456 low profile model. The DeWalt has a fairly wide handle grip so those with smaller hands could find it a little hard to use. Quote
TerryMcK Posted November 5, 2012 Author Report Posted November 5, 2012 Ok so it looks as though a 5" diameter pad looks to be the way to go. Thanks for all the recommendations I know what to look for now. Quote
duckkisser Posted November 6, 2012 Report Posted November 6, 2012 the 5 inches is a good general sander you can get smaller but that is usualy for special jobs and you can get biger but again special jobs plus it geting tuffer to find bads for the big sizes and smaller have to special ordered from sandpaper company. a 5 incher you can get pads for at any box store in a pinch. Quote
tim0625 Posted November 9, 2012 Report Posted November 9, 2012 +1 TR Baker...I have a 5" Dewalt from H Depot that's great. I also have a 5" Black & Decker CHEAP one from Wal Mart that also does a good job. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.