Recommended Posts

Posted

Greetings! I live in northern Utah (though I may be moving to the Bay Area in the near future). I recently got into woodworking; I've accumulated a table saw, a cheap 9-inch table top bandsaw, a scroll saw, a drill press, a router table with a plunge router, and an unbelievably crappy thirty year old midi lathe (it belonged to my uncle when he was a teenager; if anyone knows what sort of thrust washers to use on lathes, I'd love to know).

A few weeks ago I found an old jack plane in my grandfather's wood shop. A few days ago I finally figured out how to properly sharpen and restore it. I almost regret it; I've become plane-obsessed. I feel this compulsion to accumulate every type of plane that has ever existed; hopefully, this desire will fade to merely wanting another jack plane, two or three smoother planes, a shoulder plane, a jointer plane, a block plane, and a dozen or two (or. . .three?) moulding planes. I'm so excited that I can flatten large areas of wood without having to cough up the money for an 8-inch jointer, or use the plunge-router technique. I hate using plunge routers to joint the faces of boards.

I haven't been this excited since I figured out how to make card scrapers. Anyway, can you find moulding planes at antique shops? Does anyone make them, for a reasonable price? I'm not going to have a justification to buy one anytime soon, but I'd really like to know more about them.

Thanks!

Posted

Hi and welcome. Got to watch the hand plane slope as it is a slippery on for sure. I have slid down it and may never find my way back up.

As for the molding planes, yes in my area, they are plentiful for sure. You may have the same luck, just stay off the beaten path and look around.

Posted

I believe that cackling I hear is Shannon, off in the shadows somewhere, fingers pressed together and a wicked grin on his face, content in the knowledge that another young mind has been turned.....

:)

Oh, and welcome Joe!

  • Like 1
Posted

alot of the old master charpenters just made there own planes and they would cut and sharpen there own blades to make their own molding. im just now going to hand tools since i might not have power tools so in the way you are leagues ahead of me. you might want to think about geting a newer lathe or fix up the one you have. i just spent the better part of a year turning to get decent at it. im not a expert but i enjoy it and spend as much time as i could. the best part about lathe work is the footprint you can turn in just about anywhere because a lathe is only as big as a dresser and you can make a project in a matter of house out of fire wood. you dont need a jointer (does help) or a plane or table saws. but a band saw is very helpfull.

Posted

alot of the old master charpenters just made there own planes and they would cut and sharpen there own blades to make their own molding. im just now going to hand tools since i might not have power tools so in the way you are leagues ahead of me. you might want to think about geting a newer lathe or fix up the one you have. i just spent the better part of a year turning to get decent at it. im not a expert but i enjoy it and spend as much time as i could. the best part about lathe work is the footprint you can turn in just about anywhere because a lathe is only as big as a dresser and you can make a project in a matter of house out of fire wood. you dont need a jointer (does help) or a plane or table saws. but a band saw is very helpfull.

I might end up making my own blades for moulding planes, though it's probably not something I will enjoy doing. The lathe was in pretty terrible shape when I got it; I had to weld together a new motor mount. The tools were all rusted as well; I had to re-edge them, though I havne't figured out how to re-edge the flute chisel thing yet. I also haven't completely sharpened any of them, mostly because it's hard to feel motivated to hone lathe chisels when said lathe is not quite working.

Posted

I believe that cackling I hear is Shannon, off in the shadows somewhere, fingers pressed together and a wicked grin on his face, content in the knowledge that another young mind has been turned.....

:)

Oh, and welcome Joe!

Thanks. Is Shannon a hand tool only person? If so, how hardcore (i.e. does he forswear even powered miter saws)? I've got to admit, I absolutely love the finish handtools can make; I've always disliked the finish sandpaper leaves (I haven't abandoned it completely, though). I don't think I'm interested in switching exclusively to hand tools. though.

Posted

To answer your original question about being able to find moulding planes in antique stores. YES, I routinely see the wooden version of moulding planes in antique stores all the time.

Posted

I might end up making my own blades for moulding planes, though it's probably not something I will enjoy doing. The lathe was in pretty terrible shape when I got it; I had to weld together a new motor mount. The tools were all rusted as well; I had to re-edge them, though I havne't figured out how to re-edge the flute chisel thing yet. I also haven't completely sharpened any of them, mostly because it's hard to feel motivated to hone lathe chisels when said lathe is not quite working.

your probably talking about some kind of gouge. what you need is some kind of jig to hold it stead for you these should help you with sharpening.

http://www.badgerwoodworks.com/articles-and-information/lathe-tool-sharpening-jig/

http://www.aroundthewoods.com/sharp.shtml

remember joe if it spins it can be a lathe a budy of mine just uses a drill press and a large bolt for tool rest because he is just making knobs for his boxes. its just a matter of what tools and how sharp you use on it. looks on craigs list and start saving up you can get some decent deals if you look for it.

Posted

Thanks. Is Shannon a hand tool only person? If so, how hardcore (i.e. does he forswear even powered miter saws)? I've got to admit, I absolutely love the finish handtools can make; I've always disliked the finish sandpaper leaves (I haven't abandoned it completely, though). I don't think I'm interested in switching exclusively to hand tools. though.

Joe - check out his website. You might e especially interested in his Online Hand Tool School.

http://www.renaissancewoodworker.com/

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.