RJsumthn Posted November 21, 2012 Report Posted November 21, 2012 So I have a combo oil sharpening stone I got from Ace Hardware for like $15. The surface was never flat. While at Woodcraft I picked up a Norton Lapping Stone. It said that it is used for waterstones but I was wondering if it will work on my cheap oil stone. I plan on upgrading to Norton waterstones sometime in the near future so it will come in handy eventually. If anyone has used the Norton Lapping stone on oil stones before, let me know how it goes. Thanks - RJ Quote
RJsumthn Posted November 22, 2012 Author Report Posted November 22, 2012 They call it the a flattening stone. Here is the link to it: http://www.woodcraft.com/product/2005775/17629/norton-flattening-stone-with-case.aspx Quote
jwatson Posted November 22, 2012 Report Posted November 22, 2012 thats meant for waterstones and not very good. i suggest this http://www.amazon.com/3M-9089NA-Drywall-Sanding-Fine-Grit/dp/B00004Z4AI . also you could try diamond lapping plate. http://www.dmtsharp.com/sharpeners/specialty/dia-flat-lapping-plate-1/ Quote
RJsumthn Posted November 22, 2012 Author Report Posted November 22, 2012 Thanks. I got home at looked at the stone and one of the corners was chipped so i'm going to take it back. And i've looked at some reviews and it seems like people don't like it. I will probably get an extra course DMT Dia-Sharp Stone http://www.woodcraft.com/product/2000226/24656/dmt-diasharp-8-x-3-bench-stone-extracoarse.aspx I would like to get the DMT lapping plate but that is way out of my budget. Quote
jwatson Posted November 22, 2012 Report Posted November 22, 2012 i use the drywall sanding screen in the first link can be found at home depot you use it like sandpaper tape it down to something flat like glass or cast iron top of something then rub the stone across it. really cheap 3 bucks. Quote
RJsumthn Posted November 22, 2012 Author Report Posted November 22, 2012 i use the drywall sanding screen in the first link can be found at home depot you use it like sandpaper tape it down to something flat like glass or cast iron top of something then rub the stone across it. really cheap 3 bucks. I'll have to try that. What kind of stones do you use? Quote
TimV Posted November 22, 2012 Report Posted November 22, 2012 I have that flattening stone and use it for my waterstones. It works well for me. Quote
Trip Posted November 23, 2012 Report Posted November 23, 2012 ==> drywall sanding screen I use this as well, but you need a reference surface -- i use a slab of granite or sheet of float glass -- depending on what i am flattening. Quote
Barron Posted November 23, 2012 Report Posted November 23, 2012 I've used the Norton lapping stone and it works well enough. No matter what you use, flatten your stones after every use and it takes little effort to keep them in top shape. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.