dodgeram99 Posted December 1, 2012 Report Posted December 1, 2012 Im looking to bye a steel straight edge or a set if them. Any recommendations? Quote
rodger. Posted December 1, 2012 Report Posted December 1, 2012 Lee Valley (Veritas) has a good straight edge. Quote
CessnaPilotBarry Posted December 1, 2012 Report Posted December 1, 2012 For what? Everyday building and machine setup can require completely different budgets. For example... I have some relatively inexpensive steel cabinetmakers rules that are great for layout, guiding knives while cutting veneer, drawing lines... but I would not use them to check my jointer tables for coplanar setup. I have a 36" Starrett straightedge for setup. The Starrett doesn't have inch markings, and I don't use it in daily use to protect it from damage, it's just a very straight reference tool kept out of harms way except when really needed. I also have Starrett 6, 12, 18, and 24 inch blades for my combo square that can do double duty for daily use and machine setup. Quote
wdwerker Posted December 1, 2012 Report Posted December 1, 2012 Check around metal suppliers for " precision ground tool steel" it is cheaper than dedicated machinist type straight edges, but accurate enough for us woodworkers. Mine is 1/8 by 3/4 and 36" long. Checked it with my 24" Starrett combo square blade and it is just as straight. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.