Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

I can't get good plywood where I live

Featured Replies

It's extremely frustrating. I live the capital city of my state (charleston wv) and I can't find good plywood. I'm not even talking about cabinet grade walnut veneer....I'm talking about Baltic birch for jigs and such. I just want something consistent, flat, and stable. Sadly, it's outta the question here. Everywhere I call acts like I'm speaking a foreign language, "well I got some plywood, but it ain't that Baltic stuff u said. It's good pine. U can sheet a roof with it so you know it's flat." Frustrating!!!

Most lumber yards if they don't carry baltic birch they can order it for you. Don't talk to the pimply faced kid at the front counter, walk back to the counter that caters to the contractors those are the guys that can accually help.

the good stuff is getting harder to get... no question. I get it from my local hardwood dealer --- sometimes he has to order-it-in for me. the price is also pretty high on 'good' quality plywood -- although not quite as bad as a couple years ago.

  • Author

We don't have any lumber yards or hardwood dealers here. The one we did have went out of business.

  • Author

I'm not from the area but found this on a post over at LJ. How far to Frederick MD?

http://www.hardwoodsincorporated.com/

John, I certainly appreciate the effort, but it's too far of a drive. I can get some from a woodcraft that's about an hour away but they want $200 a sheet for 3/4".

Nick I'm sorry bud your just going to have to move, no one should have live in a hell hole like that start saving boxes immediatly ;) Have you checked out online sources. I live near a state capital myself Olympia Washington although we have a few independant lumber yards to get a good selection of hardwood lumber I need to travel another 30m to the town of Tacoma, or another 60m to Seattle so I feel your pain.

if you contact some local cabinet shops, they could probably get you a lead on decent ply.

if you contact some local cabinet shops, they could probably get you a lead on decent ply.

Some might even retail it to you, possibly any other supplies you want, too.

My first two suppliers were small cabinet shops, not retail outlets. You just need a place that is willing, and where applicable, able to collect sales tax. Some places might be set up wholesale only, and selling to you might create a sales tax or accounting problem, so they can't.

If you end up going this route, you should expect weekday business hours, not nights or weekends, and they may not be able to accept credit cards.

Calling around is free... If you get "no", ask for suggestions.

-

For jigs and whatnot, I use the cabinet grade crap from home depot. The birch is about 32$ a sheet and the oak laminated is about 45$ a sheet - both for 3/4". I've probably used about 8 to 10 sheets of it in my 9 months of woodworking. I don't use plywood that much. So far the stuff has been ok. Flat, square factory edges, and I have yet to find voids. I am making a pretty unique workbench right now out of plywood and just chopped up 4 sheets into pretty small pieces - no voids I can find and it's all still flat. I don't think I would ever want to use it in a finished piece as the veneer is very thin and I sand though it often.

If it is just for jigs, why not use MDF?

If the 'whatnot' includes things other than jigs, look for waferboard; consistently sized, stable, nice veneers. Not very expensive either; I get sheets here for <$50.

  • Author

i want to make a table saw sled. i considered mdf, but I'm concerned about durability (especially when i pick it up by one of the fences).

I have two sleds made out of 1/2" MDF that see a fair share of use, they are going on three years and are as true as the day they were built. I pay about $32 for a sheet of 1/2" and $37 for 3/4", its cheap and stable. If I need to make it zero clearance I use a skin of 1/4" MDF.

Some might even retail it to you, possibly any other supplies you want, too.

My first two suppliers were small cabinet shops, not retail outlets. You just need a place that is willing, and where applicable, able to collect sales tax. Some places might be set up wholesale only, and selling to you might create a sales tax or accounting problem, so they can't.

If you end up going this route, you should expect weekday business hours, not nights or weekends, and they may not be able to accept credit cards.

Calling around is free... If you get "no", ask for suggestions.

-

This is very good advice. Look for a small time custom cabinet shop. They can probably get it for you.

i want to make a table saw sled. i considered mdf, but I'm concerned about durability (especially when i pick it up by one of the fences).

I have a 3/4" MDF table saw sled. It is perfectly square, and has been for several months now even with pretty demanding use recently. I chose 3/4" because it is heavy and really feels like a part of the table when I slide it across. Makes for a nice feeling cut.

I made a sled out of 1/2 MDF, with oak fences milled flat/square. It's been used a lot over 2+ years and it's still in great shape. I would be more worried about plywood warping with humidity changes than I would be with using MDF.

  • Author

Well, it looks like I'll be going with an MDF crosscut sled. Thanks gentlemen!

  • Author

if you contact some local cabinet shops, they could probably get you a lead on decent ply.

this turned out to be fantastic advice! i called a local cabinet shop and asked if they could sell me some of their ply. not only did he say they'd sell me some ply, but he offered to sell me whatever size i needed if i didn't want a full sheet. furthermore, he gave me free access to their scrap bin which was like hitting the small pieces lottery. there were tons of peices that i can laminate to make fences for cross cut sleds and other jigs. I'm so stoked and thankful for the great suggestion. and the best part is, the place is only 300 yards from my house!!!! i never knew such an extensive shop was that close to me. the planets just aligned for me on this one

Nice, that's quite the find! Their idea of "scrap" is probably very different from ours, so the scrap bin should be a source of some great material. Definitely build the relationship - I'm sure some coffee and donuts or something would be very appreciated.

Do they have access to Baltic birch and/or MDF?

  • Author

Nice, that's quite the find! Their idea of "scrap" is probably very different from ours, so the scrap bin should be a source of some great material. Definitely build the relationship - I'm sure some coffee and donuts or something would be very appreciated.

Do they have access to Baltic birch and/or MDF?

haha, our minds think alike! i had the same coffee/donuts idea as you. I ran across some scrap, pressed wafer board but i don't recall seeing any MDF. i don't think they have true baltic birch because their sheets were not in 5x5. on the birch ply they did have, the veneer face was flawless and it had 11 plys. looked to be way better stuff than i can get at the big box store.

NICE find!

BTW... My local dealers carry the "real deal" void-free baltic birch in 5x5, 4x8, 5x10, and 4x12... I think the popularity of 5 foot sheets is not necessarily a manufacturer or supplier requirement, but more that certain cabinet parts can be made more efficiently from 5' wide goods.

  • Author

NICE find!

BTW... My local dealers carry the "real deal" void-free baltic birch in 5x5, 4x8, 5x10, and 4x12... I think the popularity of 5 foot sheets is not necessarily a manufacturer or supplier requirement, but more that certain cabinet parts can be made more efficiently from 5' wide goods.

oh, i didn't realize it came in sizes other than 5x5, but that makes perfect sense. im not sure whether or not this stuff is baltic birch, but it does have 11 plys and very clean faces. i'll post a pic sometime.

i've lifted 5x5 and 4x8 bb -- those are heavy enough, but could not imagine a 5x10 -- that's got to be something to get into the shop...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.