Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Clamping Jig

Featured Replies

Hi you guys,

I am a wood rookie, so the only things that I do is small projects like Boxes, bird houses (LOL) and cutting boards. During the holidays I made several cutting boards for family and friends but having only 4 cabinet clamps I only can make one at a time and it takes 2 days of clamping waiting for the glue to cure. so it took for ever to make the 6 boards that I made. This friend of mine wants me to make several boards for him to give away on Valentines day and I am afraid that I won't have enough time to make all of them before Feb 14.Is there any jig or trick to clamp several boards at the same time so I can make more in less time. Thank you so much in advance for any information that you guys can sahre with me.

Alfredo

What glue are you using. Most WW glues only need to be clamped for a few hours in a warm shop or house. Most of the time I'll pull door panels after 30 minutes at 70 degrees. Overnight should be plenty long.

Don

Yes I agree dwacker- most pva glues can be unclamped in 30min or so safely then let it sit overnight before stressing. As long as your enviroment is relatively warm.

Unless I am under a tight schedule I usually glue and clamp towards the end of the day . Let it sit in clamps overnight and unclamp in the morning.

If all the parts fit well and there are no joints that take extra pressure to close then 30 minutes to an hour in clamps works well. If I have a few gaps that take extra pressure I might let it set for 2 or 3 hours. After that pull the clamps, just don't drop it or machine it untill tomorrow .

Same as Don and Jimmy said just thought I would elaborate a bit for clarity.

When I am making a project, I will do similar to wdwerker, which is save the glue up til the end of the day. I will "strategically" (as best I can) plan as many glue ups as possible in one sequence as to maximize available work time.

You can make a simple clamping jig with a couple pieces of 2x4 and some dowel stock on my simple drawing I show useing 1" dowel as I've used this method in the past 1" dowel is what I had on hand. You just drill one dowel into the 2x4 as straight as you can drill the other dowel wider than the width of the piece you are clamping You'll need two wedges per clamp check out the picture below you'll see what I'm talking about.

post-2926-0-95093500-1356804934_thumb.jp

I was going to recommend the wedge idea. That's how the used to do it before someone invented stuff for us to spend money on. That video is simple genius!

If you use caul, you can use just two clamps for each, then could glue up two at once. I agree about not needing so much clamping time as well, depending on the glue and temp, etc.

Big fan of wax paper. I put it between things that need to be glued but shouldn't stick together, under projects I'm finishing but don't want to get the finish on the surface, etc. Pretty cheap and they even sell it at my local hardware.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.