rodger. Posted February 10, 2013 Report Posted February 10, 2013 My new workbench is almost complete, so the next project is going to be a dedicated sharpening bench. I googled it, and got some general ideas of what people have done. Does anyone have any advice or experience with a dedicated sharpening bench? What should I include or omit? I will use Japanese water stones, and jigs. I don't use sandpaper or power equipment for sharpening. I have everything thing I need, which is not too much stuff to store. I have 4 waters tones, the mkII jig, a cambering wheel, a flattening plate, and a spray bottle. I also have a decent magnifying lens to help. I will be sharpening plane blades and chisels of various sorts and varieties. I suppose a good light would be nice to add. Ideas? Quote
villaggioww Posted February 10, 2013 Report Posted February 10, 2013 If I had the space and $, I would build a cabinet and put one of these on top. http://www.grizzly.com/products/24-x-36-x-4-Granite-Surface-Plate-2-Ledges/G9657 It would still be much cheaper than the Lie-Neilsen sharpening bench but would give all the benefits. Mike Quote
duckkisser Posted February 11, 2013 Report Posted February 11, 2013 i would sugest you put your grinder on it for shaping metal. dont have to use for sharpening but it comes in handy when i have to reshape a piece of steel before i sharpen it. i sharpen with my grinders so my style will be different then yours. here is my sugestion decide what you will sharpen on it. the usualy suspects are usualy chisles, carving tools, lathe tools, knives, scrapers. then make a list of things that you use for sharpening. water (spray bottle). sharpening pond, oils, rags, diamond wheel flatteners, guides, tool rests, assorted jigs, different types of stones, diamond plates, hone, honing compounds, sandpaper anything else you need. once you figure it out yourself. for myself i would sharping carving and turning tools (hourly) more then chisles so i would want a portable tool station. something i can pull over to my bench or lathe and then i can touch up my tools with little effort. it would have to be wide enough for two 8" grinders, then i would put in two thin drawers for angle finders, lathe tool jigs, honeing compounds and the such. i dont like to sharpen with stones so i would not have a sharpening pond or the stuff that would go with stone sharpening. but i think that i would combine my lathe tool stand into a sharpening station since i would roll it over next to my lathe. often. so i would need to have room for 10 lathe tools to stick up easily grabs but still out of the way. for you i would get a granit, or marble top with a sink hole in the middle to drop a plastic pan that drops down into to be a pond. then make a rack to suspend over the top of the plastic tub that you can use to set your 4 stones on then you can hop from one to the next with no set up. have a shelf underneath to set your rags and bottle's on. attach your magnifier to a corner that is easy for you to get too. and put in a drawer or two under your shelf to store all your odds and ends in. also dont forget premeasured stop blocks to the length of your tool angles Quote
jHop Posted February 11, 2013 Report Posted February 11, 2013 marc had a video on a class he attended, and the host's sharpening station is in the background. I believe I remember Shannon saying something about koi in the pond of the station, but I don't remember which video it was. (head hurts from cramming all this knowledge in. Me go hit food with rock now, make yummy paste to take to big noisy square cave for classes in new daylight time tomorrow.) If someone remembers it, please post a link. Quote
duckkisser Posted February 11, 2013 Report Posted February 11, 2013 It's the video on card scraping Quote
RenaissanceWW Posted February 11, 2013 Report Posted February 11, 2013 I would suggest you make it only as big as you need to hold your materials and to sharpen on the surface. Then make the top out of something that will clean up easily like steel or granite. I made a dedicated sharpening station years ago and put a laminate top on it. I also built it huge with all kinds of storage. First the laminate has not weathered well and I can never get the top clean and I have all kinds of grit contamination going on. I don't dare set any tools down on the top as they can get scratched up pretty easily now. Likewise the powder from the grinding wheel gets embedded in the surface too. Second I made the top too big so it just invites me to set stuff on it which I then have to clear away when I want to sharpen. This pretty much defeats the purpose of a dedicated sharpening station if you have to go through a "set up" stage before using it. I plan to rebuild one some day and it will be very minimal in size and storage. Quote
wilburpan Posted February 11, 2013 Report Posted February 11, 2013 For my sharpening station, it's a basic table with a lower shelf to store sharpening paraphernalia. I made the table and the top out of 2x material, and used a number of coats of Waterlox on the top. The top is certainly no longer pristine, but any loose grit on the top wipes off, and I don't have any issues with cross contamination. My top is big enough to hold the two things that I want readily available for sharpening: waterstones for chisels and plane blades, and a Tormek for turning tools. Quote
TerryMcK Posted February 13, 2013 Report Posted February 13, 2013 Have a look at mine here http://tmcwoodworks.blogspot.com/2013/01/sharpening-station.html or here http://www.woodtalkonline.com/blog/166/entry-2640-sharpening-station/ Really basic stuff with waterstones and MKII honing jig Quote
tirebob Posted February 13, 2013 Report Posted February 13, 2013 I just keep my sharpening kit in a small rubbermaid and steal the wifes kitchen counter at sharpening time. Edge tune-ups are done with a strop while working. Quote
rodger. Posted February 13, 2013 Author Report Posted February 13, 2013 Have a look at mine here http://tmcwoodworks.blogspot.com/2013/01/sharpening-station.html or here http://www.woodtalkonline.com/blog/166/entry-2640-sharpening-station/ Really basic stuff with waterstones and MKII honing jig I never considered a wall mounted version. Thanks for the brain food! Quote
JuanGatico Posted February 13, 2013 Report Posted February 13, 2013 Hi Maybe, you would like to consider Tom Fidgen's sharpening bench: http://www.theunpluggedwoodshop.com/category/a-dedicated-sharpening-bench. Quote
Vic Posted February 14, 2013 Report Posted February 14, 2013 Here's what I built. From the hits on my blog, people must like it. I do. It's really handy. http://www.tumblewood.blogspot.com/2011/06/modular-sharpening-station.html Quote
duckkisser Posted February 14, 2013 Report Posted February 14, 2013 forgot about your bench vic got to say that is probably the cleanest fanciest yet simplest water stone pond i have yet to see. it does everything necissary with little to no effort. Quote
rodger. Posted February 14, 2013 Author Report Posted February 14, 2013 Hi Maybe, you would like to consider Tom Fidgen's sharpening bench: http://www.theunpluggedwoodshop.com/category/a-dedicated-sharpening-bench. That is a nice bench. I have seen first hand on a visit to his workshop. Quote
Vic Posted February 14, 2013 Report Posted February 14, 2013 Yea, Tom's bench is MUCH prettier than mine! I do like using mine, though. Quote
duckkisser Posted February 14, 2013 Report Posted February 14, 2013 vic dont talk less about the bench i think yours is better because the entire top is you pond so if it splashes over your stones oh well and when your done for the night just lift the plus and let it slide out. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.