wjffineww Posted February 16, 2013 Report Posted February 16, 2013 This question is in regards to oil stones as well as wet/dry sandpaper, as I use both. What should I be using for oil on the stones? Should I use that same product on the paper? How much should I be applying and what is a good way to tell when to add more?I'm just not sure if I'm using too much, or not enough. Thank you for thoughts Quote
tirebob Posted February 16, 2013 Report Posted February 16, 2013 I am not an oil stone user myself, but my understanding is that really any light oil will do the job. I know my buddy who loves oilstones just uses 3in1 oil... Not sure about sandpaper though. I never touch the stuff! Quote
RJsumthn Posted February 16, 2013 Report Posted February 16, 2013 I'm a water stone and diamond plate guy but I know that The Schwarz uses Olive Oil on his oil stones. If you're using Wet/Dry sandpaper just use water and you can add a little dish soap for some added lubrication. As for how much to use just coat it to start then you can feel and hear when you need more. Quote
Dave H Posted February 16, 2013 Report Posted February 16, 2013 With the wet dry sandpaper just us water to float the slurry away, and lubrication. If your useing a glass, or stone base the water will also cause a suction between the SP and base so the SP won't slip when in use. Quote
G S Haydon Posted February 16, 2013 Report Posted February 16, 2013 I have never used sandpaper, it's not for me. When I have used oil stones I have used 3 in 1 and it has worked just fine. Add enough oil to prevent heat build up and as RJ said you feel and hear when you need more, nice a smooth in both feel and sound are good. At work we have a tormek system, however when I finish putting together my own selection of tools for my own projects I am going to take a leaf out of this guys Nice and simple, however if sandpaper works for you and you like it stick with it. Quote
CessnaPilotBarry Posted February 16, 2013 Report Posted February 16, 2013 Most of the oilstone users I know use mineral oil from the laxative section of the drug store. Quote
wjffineww Posted February 16, 2013 Author Report Posted February 16, 2013 Thanks for the replies, I guess it sounds like basically what I have been doing , thanks Quote
nateswoodworks Posted February 17, 2013 Report Posted February 17, 2013 I have used oilstones for years and have tried the 3in, kerosene, and mineral oil. The mineral oil mixed at least 50% with mineral spirits works well as does kerosene but the later kept me in the "you stink" doghouse with my wife as well not to mentn that I'm not thrilled with the idea of inhaling the fumes and the added fire danger.a year or so I bought a couple new stones as I wanted wider ones and bought some of their actual honing oil, I will never go back! I use less oil now which means less mess and my stones have yet to get clogged which would happen from time to time before. If I were you I would order some from a place like Dans Whetstone and see what you think and go from there, I know i am sure glad I did. Quote
jhl.verona Posted February 17, 2013 Report Posted February 17, 2013 Most of the oilstone users I know use mineral oil from the laxative section of the drug store. I use 3M lapping film and used to use WD-40. Now I use mineral oil - in the form of Johnson's Baby Oil, which has the added advantage of being perfumed... It holds the swarf much better than WD-40 IMHO. John Quote
wjffineww Posted February 17, 2013 Author Report Posted February 17, 2013 good tip nate I'll give that a try. How do you know when the stone is clogged? How do you remedy that? Quote
baok Posted February 17, 2013 Report Posted February 17, 2013 I've tried several different oils on stones: olive, 3in1, WD-40. Olive oil seemed a bit weird to me; kind of a strange consistency. 3in1 smells kinda bad but seems to work and is cheap. Nobody in the house will steal it for something else and so I use it. Quote
Jim DaddyO Posted February 18, 2013 Report Posted February 18, 2013 I have a chain saw, so I use the bar oil on my oil stone. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.