duckkisser Posted March 12, 2013 Report Posted March 12, 2013 http://www.lie-nielsen.com/catalog.php?sku=DP is it worth buying this to make my own dowels? the project my class is thinking of making needs long dowls for camp stools. rather then spend the money to make them thought we would use some of the scrap to make some up. or would it be more cost effective to have a machine shop make one sinces its basicly just a hole with sharp edges. Quote
Barron Posted March 13, 2013 Report Posted March 13, 2013 How long are thinking. I like my dowel plate - I can be sure of the size. However, once you get a blank more than four or five inches long it's easy to break the dowel blank. I also think the lie-Nielson has holes that are slightly tapered to help make driving the wood through the hole easier. That said, you can make your own with a flat piece of steel and a drill press. Quote
wdwerker Posted March 13, 2013 Report Posted March 13, 2013 There is a jig on LumberJocks to make dowels using a cordless drill and a bandsaw! He has a video of it and it looks like it works pretty well and quickly too. Quote
G S Haydon Posted March 13, 2013 Report Posted March 13, 2013 Hi Duck, We have a dowel plate here my great grandfather made, I have only ever used it to make drawbore pins and by the look of it that's what the Lie nielsen plate does. If you want to make long dowels I would not bother. As baron says when they get long the get quite untidy. The Lie-Nielsen item looks great but quite expensive for a piece of metal with holes in it. My plate is a thick piece of steel with a 90 degree bend for locating in a vice or clamping, with holes drilled into it, not even with tapers like the lie-nielsen. Just start with a slightly over square piece of timber, relive the edges and whack it through. If you want really strong dowels and you have the time, use split wood rather than sawn. When we used to make wheels for carts or rungs for ladders they would always be from split timber. By splitting the timber you follow the the grain and get a really strong component. If you saw it you can work against the grain and it is more likely to break. Thatchers do the same to make spars, people also used to split laths used in lath and plastering. Let us know how you get on. Quote
Indy Cindy Posted March 24, 2013 Report Posted March 24, 2013 Duck, This dowel maker showed up today in my Youtube feed. Cindy Quote
G S Haydon Posted March 24, 2013 Report Posted March 24, 2013 Cindy that's a neat link. It's in the ideas notebook to trial. The one bad thing about a dowel plate is that it can be a bit aggressive on large dowels. This video idea would seem really good on the large dowels. I think the dowel plate would be quicker on small dowels though. Quote
G S Haydon Posted March 27, 2013 Report Posted March 27, 2013 Now here's a dowel plate. Not as refined as the Lie-Nilesen offering but it does the job on heavy duty draw bore pins Made in the 1920' by Great Granddad for his wheelwright business. 1 Quote
CessnaPilotBarry Posted March 28, 2013 Report Posted March 28, 2013 I made one from mild steel, along the line's of GS' version. The steel came from Home Depot hardware aisle, as a 1/8" x 1-1/12" x whatever length strip. I simply drilled a bunch of holes, then polished one face on my diamond plates. Start with the biggest hole the blank will fit, and push the stock through successively smaller holes from polished to non-polished side. If it seems to take extra effort, repolish the face. To use it, I open a vise enough to clear the exiting stock, place the polished side up bridging the gap, and push the stock through. You may find that the stock will go better in one direction or another, as it might with a hand plane. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.