Tpt life Posted April 5, 2013 Report Posted April 5, 2013 I'm relatively a hand plane novice. What does it mean about my setup if SYP shaving force their way between the iron and chip breaker? Quote
G S Haydon Posted April 5, 2013 Report Posted April 5, 2013 Hi C Shaffer, You might need to check out how well the chip breaker fits against the blade. It may need lapping. It's essential they have a perfect fit or the plane will choke. Also you may need to tighten the nut that joins the chip breaker to the blade a touch. Quote
JMort847 Posted April 5, 2013 Report Posted April 5, 2013 To add to what G.S. said, search the net for handplane blade sharpening articles (Chris Schwarz, David Charlesworth, Chris Gochnour, et.al.). They will show you how to sharpen a blade and chip breaker. Some rely on wet/dry sandpaper on a smooth, flat surface if you don't want to get into waterstones. You will also find great hints and tips on setting up your chip breaker, frog and blade for the best job. Quote
wjffineww Posted April 6, 2013 Report Posted April 6, 2013 I would highly recommend Chris Schwarz's book Handplane Essentials. Very thorough, I've read it twice, and could easily go a third time through it. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.