Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

How do I make cheap and fast crates to move a shop to a new location?

Featured Replies

So, god willin an the creek don't rise, we're about to get our first house.  We've submitted an offer and we're waiting to see if it's going to be accepted. One of the nice things about the new place is that it includes a separate workshop in addition to the 2-car garage under the house. This is great for me because I'm a mechanic and I own my own shop. I'll have about a 25' commute to work.

The thing I'm dreading most is moving the workshop from the place it is now to the new place. My woodworking tools are actually going to be easy to move because it's all stuff that was designed to be used on-site anyway, with the exception of the BIG bandsaw. However, my mechanic's tools are an entirely different story. After asking on GJ, I've been convinced to empty the rolling tool chests before I attempt to move them. Additionally, I've realized I have more stationary tools that no longer have shipping boxes than I thought I did. So, I need to build some tool crates out of wood to move all this stuff. I need two things, really: custom fit crates for moving specific stationary tools and a bunch of generic crates so I can dump out each drawer the rolling tool chests into its own crate and load that separately from the rolling chest itself.

The two factors that are really dogging me on this are money and time. When this gets rolling, I'm not going to be able to devote a week to making crates. I need to keep the shop up and running (to keep making money) until the last possible moment, then crate everything as quickly as possible and haul ass to the new place. The other issue is cost. We don't have a lot of money, as I'm sure anyone that's self-employed in this economy can relate to. These crates have got to be CHEAP. I think if I go over $5 per crate (1 crate being one drawer's worth), I'm going to be out of money before I'm out of drawers. That rules out basically all the woodworking methods of box making I know of, since I do furnature and fancy stuff as a hobby, not rough-n-ready industrial. :lol: The really low-end stuff I can think of (cheap crates made of lathe and staples like you get some HF tools in) wouldn't hold a drawer full of sockets without the bottom falling out.

So, does anyone know of a construction design and materials that will allow me to make a bunch of crates cheaply and in a short amount of time?

milk crates, cardboard boxes, ect.....

 

I would take the time and make some crates that lock together into a shelf then you have shelving for some of you tools for books in the house or to just sell.

 

you need two ends, then you make a bunch of riped down boards say a inch thick and a inch apart what ever length you want. then when you attach them to the sides one side has the boards starting at the bottom and every other inch, the next side start on inch from the bottom  and are attach every other inch.  that way when you set the crates on there sides they will lock together into a shelf.

Who supplies your tools? My buddy's SnapOn rep moved his tool carts loaded full. Brought the truck such carts are delivered in with lift gate etc. after hours no less. A good customer service rep should be willing to work with you to keep your business without charging an arm an a leg.

Faced with the same issue, I would use the drawers themselves as crates.  Take out the drawer with the tools in it.  If not too heavy, stack two or three (I don't know how many wrenches you have in each, etc.).  Clear poly wrap (the thick kind, not simply saran wrap) over the top, or to wrap two or three together, and there's your crate.  You're not mailing them, you're driving them, right?  As an alternative, if that's too hard and the tool rep with the truck is unwilling/unable to help, avoid the mess by pulling the drawers, wheeling the chest into the truck, and returning the drawers to the chest for the drive.

 

For the bigger tools (bandsaw, etc) put it on a pallet and strap/bolt it to the pallet.  1/4 in ply with 1X1 reinforcements for screws, and you're all set.  The pallet makes it easy to move with a standard pallet jack.

Don't known where you are located, but try the Produce dept. Of your local supermarket. With summer fruit coming in to season, you would be surprised at the quality of some of the crates that fruit is shipped in. I got collapsing plastic crates used for peaches that were about 8" deep and 16" x 12" that I use for planting beds.

+1 on the pallets for the big stuff. You can make a crate by using one pallet for the base, and 4 pallets for the sides screwed at the corners. And they're usually free.

I have a fairly large snap-on roll away in my garage and would never empty it out to move it. Buy a roll or two of bubble wrap fit it in your drawers on top of your tools to help hold in place while going down the road. But I guess you would need a trailer or truck with a ramp low enough to roll it onto. We rented a truck from ryder to move mine out of storage.

I just moved over 2,000 miles in Jan. and I didn't crate anything. I left my mechanics tools in my red tool cabs and took apart my SawStop. They all arrived in good shape with the exception of some minor rust spots. However I would never used the same mover again because of the lies and delays in getting my personal belongings.

  • 1 month later...

I have moved my shop twice...it comes down to 2 things....are you moving yourself and how far are you going.  

 

the first time I moved everything myself....it was a nightmare it took me a week to pack and break everything down then it took me a day with a friend to load the truck, and a day to empty it my move was 70 miles.  it was a nightmare

 

the second time I bit the bullet and hired a mover...it still took me a week to pack and break down...it cost me 135 bucks an hour for five BIG dudes with all the moving gizmos needed.  they showed up at 8am...had the truck loaded before 10 am...drove twenty miles and had the truck unloaded in my new shop before noon...cost me about 500 bucks

 

when I did the math it only cost me about 200 mor then doing me myself, they assumed all liability for everything, they wouldn't let me load/unload anything (liability)  and I was seting up my new shop by noon. 

 

I packed all the small stuff in boxes and Rubbermaid containers  and didn't breakdown any big tools other then taking the outfeed table and excaliber slider off my table saw...they even moved my 5hp onieda cyclone completely together stand and all....

 

I will never move myself again...best thing was I didn't need to beg friends for help and my body didn't feel like I was beaten with a bag of nickles for a week

I would suggest using using cardboard boxes that you can get free for the asking from various businesses. These are easily made ten times stronger with a thin sheet of plywood on the bottom.

There's a company out there called ULine.  While I'm not suggesting you purchase their products - do wood workers ever break down and purchase someone else's product when we feel we can make it x times better than any mass produced product? - I am suggesting you take a look at their offerings and see if there's anything that you like or can adapt/ use.

 

I will say that every year for Christmas, I get the boys a roll each of bubble wrap.  It's a fantastic gift, and something like 10' per roll only costs about $7.  If you're worried about some products or tools shifting, a roll of bubble wrap is a fantastic purchase.  (And then there's the built-in stress relief of popping bubbles after the move...)

I agree with a lot of posts from above. I myself am a Toyota Tech, and I know moving my box is terrible. But the last time I moved, I called my snap on dealer who gladly moved my box in exchange for lunch.

 

With the money we spend on our tools, thats the least they could do. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.