chicks82 Posted June 13, 2013 Report Posted June 13, 2013 Hello everyone, My dad gave me this plane a couple months ago. He was fairly sure it was a #9 and so am I. I just want to be sure. It's a craftsman and I know it's bevel down. But doesn't have anything others then made in the USA on the body and craftsman on the cap iron. https://www.dropbox.com/s/hijol3gglhs616a/2013-06-12%2010.25.49.jpg Quote
krtwood Posted June 13, 2013 Report Posted June 13, 2013 It's either a #4 or a #3. #4 has a 2" blade, #3 has a 1-3/4" blade. Both are 9-1/4" long and serve the same purpose. Quote
mikem Posted June 13, 2013 Report Posted June 13, 2013 I know the Miller Falls #9 is the same as a Stanley #4. I wonder if the Craftsman Planes were using the Miller Fall's numbering. Quote
TerryMcK Posted June 13, 2013 Report Posted June 13, 2013 It sure looks like a #4 How long is the sole? Quote
G S Haydon Posted June 13, 2013 Report Posted June 13, 2013 I know the Miller Falls #9 is the same as a Stanley #4. I wonder if the Craftsman Planes were using the Miller Fall's numbering. Mike, with my limited knowledge I though it was a Millers Falls! +1 on the probable crossover on numbering. The numbering issue reminds me of VHS vs Betamax. Quote
mikem Posted June 13, 2013 Report Posted June 13, 2013 The red frog also is representative of a miller falls plane. The one thing I noticed is that Miller Falls had a two piece cap iron, where this one has a more traditional one. However, I don't know when Miller Falls started with the two piece cap iron. Quote
Tpt life Posted June 13, 2013 Report Posted June 13, 2013 What is the writing cast under the adjustment knob? Quote
chicks82 Posted June 13, 2013 Author Report Posted June 13, 2013 I will have to look at it when I get back in town. I am away from the shop for two weeks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.