Recommended Posts

Posted

Translation: I hopped on the low-angle jack plane bandwagon...the jackwagon.  :D   I swear, you cost me more money than my wife, Marc...in a good way.  Actually, it was a long time coming because I've been wanting a good plane to shoot miters with.

 

Pulled her out of the box, did nothing, and took decent end grain shavings.  Now I gotta build a shooting board.  Anyone have some great plans handy?

 

arr3.jpg

 

l03h.jpg

Posted

My shooting board is just a few pieces of MDF glued and nailed together. The fence is a piece of hardwood at 90 degrees to the runway, and I have a bench hook on it as well.

Posted

Very nice Eric. I am currently fighting off the evil forces that will make me go to the lie nielsen website and put a bunch of tools in the shopping cart. Not that this would be a bad thing, I would have no remorse. Although, another one of my hobbies is I love counting money every week and putting it away. 

Posted

Don't worry about plans.  Just screw a board  to a piece of 1/2" plywood maybe 18x12, then drop that on top of some 3/4 ply (or some sheet good) that is 18x16.  Now screw a cleat to the underside.  Test your board for square and either plane your fence with a rabbet plane/shoulder plane or shim it with blue tape.  Now shoot away.

Posted

Thanks for all the suggestions, guys.  The one thing I still don't get is how do you not plane away your shooting board every time you use it?...color me confused on that part.  Not sure what you mean, Shannon, when you say, "either plane your fence with a rabbet plane/shoulder plane or shim it with blue tape."  Does this have something to do with that?

 

He has a video for

 

Sweet plane eric, makes my Record #5 look a bit sorry for itself.

 

Thanks Graham...I found that video yesterday, but I had to stop watching as soon as he started ripping that board by hand.  I have to question a man's judgment...I mean at least get yourself a bandsaw for f*@#'s sake!  :D  LOL

Posted

"The one thing I still don't get is how do you not plane away your shooting board every time you use it?...color me confused on that part."

 

The plane will chew into your shooting board to a point.  As long as you're not using a rabetting plane that completely spans the sole of the plane, the plane bottom  will eventually butt up to the edge of the upper board and stop (unless you advance the iron more).

 

Posted

 The one thing I still don't get is how do you not plane away your shooting board every time you use it?

 

A ridge develops where that little bit of sole doesn't cut.  The plane rides on that ridge in the horizontal plane, and against the floor in the vertical.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.