William Taylor Day Posted July 1, 2013 Report Posted July 1, 2013 Just getting started with woodworking and I'm going the restore and use old tools route to get started a little cheaper (I've also found it's really helped me understand the tools better). Anyway, I just finished re-toothing and sharpening and old backsaw. It was my first try and I wanted to see if you all had some constructive criticism ( assuming my picture is good enough to make a judgment with). Quote
Skunkeye Posted July 1, 2013 Report Posted July 1, 2013 Hard to tell from the picture. How does it cut? The proof is in the pudding. Quote
William Taylor Day Posted July 1, 2013 Author Report Posted July 1, 2013 It seems to be cutting well, but admittedly, this is the first saw I've ever used so I can't compare it to anything else. It's not binding and seems to track fairly straight (at least as straight as I would expect given my experience). It also feels like it is getting through the cut a good speed. Quote
Tom King Posted July 1, 2013 Report Posted July 1, 2013 I've seen a lot worse. If it throws sawdust, and can stay on a line, you're good to go. I must admit though, I can't tell which is the handle end. It looks like it could rip to the right, and crosscut to the left. Quote
TRBaker Posted July 2, 2013 Report Posted July 2, 2013 William, it's hard to tell from the picture, but it doesn't look to me like you joined the teeth first. If it's cutting good, then it obviously isn't bad enough to make a difference. Quote
TRBaker Posted July 2, 2013 Report Posted July 2, 2013 Realized I forgot to welcome you to the forum, William. Hope you enjoy it here. There's a recent thread started by GS that you might enjoy, called "The Most Comprehensive Saw Video Ever". Check it out. 1 Quote
nateswoodworks Posted July 2, 2013 Report Posted July 2, 2013 Realized I forgot to welcome you to the forum, William. Hope you enjoy it here. There's a recent thread started by GS that you might enjoy, called "The Most Comprehensive Saw Video Ever". Check it out. You beat me to both, the welcome aboard and the video reference! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.