Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Cleaning Pitch Off Bandsaw Tires

Featured Replies

What do people generally use for cleaning wood pitch / buildup off the bandsaw tires?  The blade doesn't seem to be having much of an issue, but with the tires on the saw being yellow (not black) the pitch is very noticeable.  Tried picking at it with my finger with no luck.  A dry tooth brush

was just about as successful..

 

Never really gave it much thought on my old saw as I never noticed it (black tires) :unsure:.  Actually now, wondering if that could have been one of the causes for the upper wheel throwing the blades?

 

Thank you!

Andy, I'd clean them the same way you clean your saw blades when they get a build-up. Some folks use oven cleaner, some use a product sold as a blade cleaner, others use mineral spirits, lacquer thinner, simple green, etc., etc., etc. I wouldn't use anything that would leave an oily residue on the tires.

I'd be careful about using anything too caustic on the tires.  Not sure if you have rubber or urethane but I'm reasonably sure oven cleaner would prove detrimental.  Whatever you end up trying, test it on a small spot first and make sure you don't suffer any losses.

  • Author

It's a brand new saw that's gotten a lot of hard use over the past few days :rolleyes: ..  I am guessing it's a urethane tire but that is totally a guess.  I've found some threads about using simple green, others recommend naptha (I don't think that's a good idea)... 

 

Not sure what's safe and I don't want to screw up new parts! 

==> What do people generally use for cleaning wood pitch / buildup off the bandsaw tires?

 

you could ask PM what they recommend -- I've used simple green on urethane tires -- but it's only so-so...

  • Author

That would be too easy :P ! 

 

Honestly I was hoping to avoid being on hold for hours for an answer..  But, that will be one of the first things I do in the morning!  It doesn't seem to be much of a build up, but more of a spot staining with some slight buildup.  If it isn't removed I suspect it will become an area where future "stuff" will accumulate quickly creating an issue...

 

I'll let everyone know what PM says in the morning...

  • Author

From PM:  Use WD-40..  It's what they use at the factory for cleaning all the parts (painted and non-painted) as well as the wheels..  Just make sure to let it dry before replacing the blade.. 

 

Also, as a confirmation they are urethane tires..

==> Honestly I was hoping to avoid being on hold for hours for an answer..  

 

actually, i've had pretty good luck with their tech guys -- the only time I get a long wait-time is when there is a wood working show and their tech guys are all off supporting it...

  • Author

==> Honestly I was hoping to avoid being on hold for hours for an answer..  

 

actually, i've had pretty good luck with their tech guys -- the only time I get a long wait-time is when there is a wood working show and their tech guys are all off supporting it...

 

I was pleasantly surprised when I called; only took a few minutes to reach one of their tech's  :) .  Very polite and helpful

I was just reading through this thread and my response was gonna be wd-40. I figured since thats what I use to clean the rollers on my dewalt planer, as specified on their website. 

==> wd-40

 

I don't use a lot of WD40, et al in the shop.  It's a historical thing -- years ago, I had a real problem with finish contamination n a large project.  I never really got to the bottom of it, but (right or wrong) blamed my rather liberal use of spray lubricants on stationary tool tables.  Even since then, I've been using things like WD40 sparingly...

 

 

==> googone

 

that's an idea...  what is that stuff, dilute MEK?

==> goo gone is naptha

 

what's in goof-off?  is that the one with added xylene?  I seem to remember that one of these is really bad for you...

 

 

==> sold for expensive

 

of course...

==> wd-40

 

I don't use a lot of WD40, et al in the shop.  It's a historical thing -- years ago, I had a real problem with finish contamination n a large project.  I never really got to the bottom of it, but (right or wrong) blamed my rather liberal use of spray lubricants on stationary tool tables.  Even since then, I've been using things like WD40 sparingly...

 

 

==> googone

 

that's an idea...  what is that stuff, dilute MEK?

 

I doubt its anything overly strong. It doesnt melt plastic or even remove paint. My wife uses it to remove price tag goo and stuff like. 

  • 2 weeks later...

I just cleaned my band saw tires,  brushed on each wheel as I turned it by hand. Used steel wool also. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.