Recommended Posts

Posted

So my birthday is coming up and for fear I may receive a highly gift-able pencil sharpener I am going to give some guidance to my wife on what may be on my wish list.

High on the list is a reliable square and maybe some calipers.

What do you all recommend on the style/manufacturer for the square? I was a checking out the 24" woodpeckers t-square, but wondering if another style would be better. Currently most of what I own are construction grade squares. Maybe a follow up question would be, what squares should a hobbyist own?

The calipers is probably a tool I will only use every so often, so here looking for the best of the value priced models.

Thanks in advance!

Posted

Take a look at Harry Epstein website Products Engineering makes combination squares with 12" blades. 24" are also available. They sell cosmetic seconds, still very accurate but minor flaws in the finish. I have a Starrett square with a 24" blade that I paid dearly for years ago. I made a careful comparison and can find no difference that a woodworker could discern .

$20 for a very accurate 12" combo square and $20 for a 24" blade you can use with the same square is the best deal I have ever found. Shipping was reasonable.

The calipers with a inch scale on the dial are in constant use in my shop. 1/16 th's are labeled with 4 lines between them, so one line =1/64th. I got mine at Highland Woodworking, $30 or so I think.

Posted

Money is well spent on a good square, but don't be afraid to look at Harbor Freight for the calipers. They carry a pretty nice digital unit that reads fractional inches, thousandths, or mm. On sale it goes for about $10. I use mine all the time, as well as an inexpensive dial indicator for tool setup.

Posted

http://store.harryepstein.com/c/ProductsEngineering.html

They have the 4" and 6" double squares as well for $15 each and made in the USA.

There was a post discussing the quality and price of squares and someone mentioned this source. I have bought several squares from them as we'll as a few parts . The bolt and knurled knob that let you adjust a combination square can wear out or be broken. I once had to wait weeks and pay $23 plus shipping for one. They sell the same quality for $3.50 each so I bought some spares.

Posted

Money is well spent on a good square, but don't be afraid to look at Harbor Freight for the calipers. They carry a pretty nice digital unit that reads fractional inches, thousandths, or mm. On sale it goes for about $10. I use mine all the time, as well as an inexpensive dial indicator for tool setup.

 

I had 2 HF digital calipers and replaced them with Mitsutoyo calipers that are, uh, a bit more expensive.  When I got them, I wondered about the HF models so I grabbed a bunch of items in the shop and compared measurements between the 2 HF models (6" and 12") and 2 Mitsutoyo (both 12").  The numbers were the same.  Granted, knowing HF's lack of consistency at times, I may have gotten two good ones.

 

Biggest difference is battery life.  The Mitsutoyo can be left on and found hours later still displaying the measure; the battery seems to last forever.  The HF calipers... if you listen you could hear them munching on the batteries.  The solution for me with the HFs was to pop the battery door open a bit before putting them away.  Made a huge difference.  Before that, it seemed every new project started with new batteries.  I used to buy the batteries by fives.

Posted

Thanks for the suggestions, I went ahead and purchased some squares from the Harry Epstein site, great suggestion Steve! $58 bucks for a 12" combination, 24" spare rule, and 4" adjustable. About $40 bucks less than I was planning on spending for one. Bought a digital caliper from amazon that had great reviews. Appears most of the reviews were from machinists or for ammo reloads so should be plenty accurate for woodworking.

My wife will be thrilled to hear what she got me. :-)

Posted

Take a look at Harry Epstein website Products Engineering makes combination squares with 12" blades. 24" are also available. They sell cosmetic seconds, still very accurate but minor flaws in the finish. I have a Starrett square with a 24" blade that I paid dearly for years ago. I made a careful comparison and can find no difference that a woodworker could discern .

$20 for a very accurate 12" combo square and $20 for a 24" blade you can use with the same square is the best deal I have ever found. Shipping was reasonable.

The calipers with a inch scale on the dial are in constant use in my shop. 1/16 th's are labeled with 4 lines between them, so one line =1/64th. I got mine at Highland Woodworking, $30 or so I think.

I have a 12" Starrett and a 6" PEC like Steve mentioned, matching in quality. My most used square is my 4" double square from Rockler but I put the 12" in the must have column and the 6" in the nice to have column. If you don't have a good RELIABLE square I would put that at the top of the list. Before I bought my starrett I would buy a new engeneer square every couple years because they would go out of square, I don't want to know how many starretts I could have bought. As for the callipers I have a decent one but honestly hardly ever use it but that's your call.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.