Recommended Posts

Posted

Hey all,

I am looking for thoughts on this headboard design.  

I am going to be using cabinet grade 3/4 birch or oak ply, and will be staining a dark amber color.

Going to skin the back with 1/8" hardboard or door skin if i can find one big enough.

 

This will be my first real project that i do on my own.  so this will be a skill building project as well as functional.  

 

I have not decided how i will finish the front faces.  thinking either iron on, our some 3/4 x 3/4 hardwood to match the plywood surface.

 

So please provide me you thoughts on the construction method and joints (All dado and glue\screwed) used.

headboard.skp

post-14553-0-82424400-1380061268_thumb.j

Posted

Could you put up another rendering without the textures?  I'm trying to get a feel for the lines of the piece and it's distracting.  Also, it wouldn't hurt to do a quick model of the bedroom with the headboard (plus mattress) and any other significant pieces in the room.

Posted

Ya know, a headboard very similar to that was one of my first ever projects back in 1977!

I've always called them "Bookcase" headboards. Mine only had one row of shelves and a sliding door that covered whichever section you wanted to. So they are quite a bit shorter than your design.

I have since made three more of the same design for the guest room, my daughter and a granddaughter.

I know that most people sneer at that old fashioned design but, doggone it, they are as handy as pockets on a shirt. We use it for books, alarm clocks, pocket change

medicines and whatever else needs to be handy while you are in bed. I installed two fluorescent under shelf lights in all of mine on each side.

My first one was made with a Skill saw, glue and a few screws out of 1" x 12" pine boards and was finished with dark danish stain and polyurethane. It's still in use to this day in our bedroom. The last three have been made within the last seven years and I used birch plywood on one and oak plywood on the other two. 

I mitered the top corners on the first one but all the rest I used dadoes and iron on edge banding on the plywood and just glue to hold the joints together. 

If I can find a picture, I'll post it if you would like me to.

 

Rog

  • Like 1
Posted

Ya know, a headboard very similar to that was one of my first ever projects back in 1977!

I've always called them "Bookcase" headboards. Mine only had one row of shelves and a sliding door that covered whichever section you wanted to. So they are quite a bit shorter than your design.

I have since made three more of the same design for the guest room, my daughter and a granddaughter.

I know that most people sneer at that old fashioned design but, doggone it, they are as handy as pockets on a shirt. We use it for books, alarm clocks, pocket change

medicines and whatever else needs to be handy while you are in bed. I installed two fluorescent under shelf lights in all of mine on each side.

My first one was made with a Skill saw, glue and a few screws out of 1" x 12" pine boards and was finished with dark danish stain and polyurethane. It's still in use to this day in our bedroom. The last three have been made within the last seven years and I used birch plywood on one and oak plywood on the other two. 

I mitered the top corners on the first one but all the rest I used dadoes and iron on edge banding on the plywood and just glue to hold the joints together. 

If I can find a picture, I'll post it if you would like me to.

 

Rog

That would be great, i would love to see the pictures.  How did you make the sliding doors?

I agree, i find this style headboard very utilitarian and much more to look at than a flat design against the wall.  plus!!! it will make a great place to move the flash light and the handgun safe, instead of on top of the cube storage on the other wall.

Posted

Please forgive me ...

 

"... and whatever else needs to be handy while you are in bed."  Just trying to figure out where pocket change fits into that.  Magic fingers bed?

 

I've always called them bookcase headboards too.  Not sure if I want one.  Just doesn't look comfortable to sit up against and I keep most of the other things on the night stand.  Everyone I've known who had one, however, really liked having it.

Posted

Please forgive me ...

 

"... and whatever else needs to be handy while you are in bed."  Just trying to figure out where pocket change fits into that.  Magic fingers bed?

 

I've always called them bookcase headboards too.  Not sure if I want one.  Just doesn't look comfortable to sit up against and I keep most of the other things on the night stand.  Everyone I've known who had one, however, really liked having it.

I thought the same thing, but then again i stack a pile of pillows up to lean against instead of the wall/headboard. but i also don't "sit up" that much in bed either.  my wife on the other hand does, which is why i am considering a sliding door for the outside cubbyholes.

Posted

Well Sepiid,

I guess I lied to you. I found a picture of the last one I made for my Granddaughter and it is made of poplar not plywood as I stated. This picture was taken in the shop while it was still under construction and has no finish on it yet. Also, I guess I only put one light in her headboard instead of two like I did on the others. You might notice that the hole for the light cord is in the wrong spot too. It should have been at the top near the light. Just wasn't thinking very well on this one. Still, it is a nice location for the clock radio cord or whatever.

It is not hard to put in  the sliding door either, (actually she didn't even want a door on it but it makes a nice place to lean your pillow against for reading in bed so I put it in anyway) Just cut a 1/4" wide groove 1/4" deep on the bottom shelf and a 1/4" wide groove 1/2" deep on the top shelf in the same plane. When you cut the door, use 1/4" plywood (which is usually thinner than 1/4") cut it 1/2"  larger than the opening so you can slip it up into the 1/2" upper groove and then drop it down into the lower 1/4" groove.

 

Maddysheadboard002_zps84bdbf10.jpg

 

 

Rog

  • 11 years later...
Posted

Do you have actual plans for this. It's exactly what I've been searching for. We have an adjustable bed so no worries about putting tht pillow up against it. 

Posted
On 5/29/2025 at 7:31 PM, mj71 said:

Do you have actual plans for this. It's exactly what I've been searching for. We have an adjustable bed so no worries about putting tht pillow up against it. 

Welcome to the forum. The thread you are replying to is 12 years old and it doesn't look like the poster has been active for 5 years, so you may not get a reply from them but perhaps you'll get lucky and someone else will chime in.

  • 2 months later...
Posted
On 5/29/2025 at 8:40 PM, Von said:

Welcome to the forum. The thread you are replying to is 12 years old and it doesn't look like the poster has been active for 5 years, so you may not get a reply from them but perhaps you'll get lucky and someone else will chime in.

wow. didn't realize the date. thanks

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.