G S Haydon Posted September 29, 2013 Report Posted September 29, 2013 Stumbled across this brochure, Oh for some pre-decimal pounds, shillings, pence and a time machine...... Quote
Llama Posted September 29, 2013 Report Posted September 29, 2013 The "Wood Bench Vise" on page 65 looks like a Moxon vise. I don't recall seeing one in a catalog before. Quote
G S Haydon Posted September 29, 2013 Author Report Posted September 29, 2013 Mel, I noticed the same thing, it's quite a small one but IMO a "Moxon" never the less. I really like the range of planes and chisels, so much choice. 1 Quote
mkirby Posted September 29, 2013 Report Posted September 29, 2013 Graham you dont need a time machine you just need to shop here Quote
G S Haydon Posted September 29, 2013 Author Report Posted September 29, 2013 Thanks mkirby I nearly bought an old sandvick panel saw from those guys a few months back but didn't press the button on it. They have a lovely range there, I wonder what these bad boys went for Quote
Tom King Posted September 29, 2013 Report Posted September 29, 2013 I would trade most of the chisels I own, which is not a small number, for that set. Quote
Tom King Posted September 29, 2013 Report Posted September 29, 2013 I found this online today when I was looking for a pit saw in good condition. I might have the make the 663 mile trip to this auction. Try this link: https://www.mjdtools.com/AuctionList.php?axcode=OL13 Graham, Do you know how much that Sandvik 288 10pt. went for? My handsaw boxes are full of the 270 through 288 saws-the best handsaws ever made. No other saw will sharpen as sharp, or last as long between sharpenings. If you saw the cypress siding I posted a link to on another thread, every piece was cut with a 10pt. 270. I don't think there is any difference in the metal between the 270 through 288s. I have some still new in the sleeves. You could buy them new in stock in the 1970s for about 35 bucks. Quote
Trip Posted September 29, 2013 Report Posted September 29, 2013 ==> De Lorean Needed Do you need an entire DeLorean? What can you get with ten quid and a flux capacitor? Maybe a couple of planes and a nice set of chisels? 2 Quote
derekcohen Posted September 30, 2013 Report Posted September 30, 2013 The "Wood Bench Vise" on page 65 looks like a Moxon vise. I don't recall seeing one in a catalog before. That is a twin screw face vise, not a Moxon dovetail vise. Regards from Perth Derek Quote
G S Haydon Posted September 30, 2013 Author Report Posted September 30, 2013 Interesting Derek, I didn't know Moxon called it specifically a dovetail vice within his text. I had assumed the term "Moxon Vice" was a modern hybrid name in the same way a French style workbench is a "Roubo". And Mel the Marples vice looks similar to the one Moxon showed in his book so I understand fully why you would see the link. Only one way too find out, now where did I put that De Lorean...... 1 Quote
TerryMcK Posted September 30, 2013 Report Posted September 30, 2013 I have a few firmer gouges on page 7 that I inherited from my grandad but never use them. The prices were difficult to understand at first but then I dug back in my memory to try and remember what pounds, shillings and pence were. (I'm just old enough to remember) For instance the 2 inch firmer chisel at the top of page 6 is shown as 3/2 that is 3 shillings and 2 pence. that equates to 16 pence in our modern currency. Putting that in perspective this 2" firmer (different manufacturer but similar quality) sold recently for £45 or 26470% of the original price and is around the same price as a modern Marples 2" firmer http://elraco.com.au/product_info.php?products_id=7568 Interesting to find out what the average weekly wage was for a joiner or carpenter in 1938. Dig out the DeLorean Graham. Quote
Llama Posted September 30, 2013 Report Posted September 30, 2013 To be certain, we'd have to go buy one. It may be possible that Marples didn't want to pay the royalties for using the "Moxon" name, and simply gave it a generic name.Either way I said it "looks" like one. Quote
G S Haydon Posted September 30, 2013 Author Report Posted September 30, 2013 It does "look" like one Terry, based on the feed back from some old boys I worked with when I started it was the "weeks wages" type of investment on some tool. This was reflected in the way they respected their tools. These days "appropriate" tools are usually less of a financial burden to purchase. Tom, I think the sandvick was about £45.00. Again it was the choice of the old boys I worked with. They had plastic handles which made them ideal if you needed to work away from the bench. Quote
derekcohen Posted September 30, 2013 Report Posted September 30, 2013 Interesting Derek, I didn't know Moxon called it specifically a dovetail vice within his text. I had assumed the term "Moxon Vice" was a modern hybrid name in the same way a French style workbench is a "Roubo". And Mel the Marples vice looks similar to the one Moxon showed in his book so I understand fully why you would see the link. It was Chris Schwarz who decided that Moxon designed his face vise to be removable to be used on top of the bench. While a few woodworkers in recent decades had designed a benchtop vise for dovetailing, it does appear that Moxon's design was lost to furniture makers until recently. What you see in the catalogue is a twin screw face vise, which was a very common vise type, which is not designed to be moved up onto the bench, but used in front of the bench. The best known modern version is the Veritas Twin Screw vise. Regards from Perth Derek Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.