Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

How to laminate sheet metal?

Featured Replies

Okay, I have a project where I need to laminate a piece of plywood with galvanized steel sheet.

 

I've laminated a plastic laminate on to plywood or MDF many times with contact cement.

Anyone out there know if contact cement will hold galvanized steel sheet to plywood? ... Any other thoughts on what to use?

In case you are wondering it is 18 gauge galvanized steel and about 3 feet by 3 feet.

 

I'm not sure if this is for finished work but, if it was me I would use Liquid Nails you will have to work fairly fast use something like a putty knife (throw away) mate the two together use some weight or clamps  the plywood will delaminate before galvanized sheet goods comes off. Liquid Nails comes in cans or tube I think I would go for the cans I think you could apply it faster which needs to happen before the material starts to skin over.

need to be water proof?  how permanent a bond?

 

I've bonded various metals to wood using a purpose-made wood/metal epoxy formulation -- works well.  I'd throw it into a vacuum press...

  • Author

I was thinking about liquid nails. Seems like a good idea.

How permanent... hmm.... well it's going to be a magnet board when its done so, I don't know, pretty permanent?

Liquid Nails is also waterproof it's use to glue down t&g floor sheeting on new house construction and can be used even when raining. Sometimes these houses aren't dried in for a month or so even in inclimate weather.

You can use contact cement just use don't that waterbased crap you buy and the big box stores... The higher quality the better.  We used to laminate deco metal all the time for Duncan Donuts...

Chet

 

How are you planning to finish the edges, hem or 90 degree bend?

 

Wood and metal expand differently and  without  some  type of edge treatment the metal  may ripple.  

There are magnetic chalk board paints available now. Not sure how well they work, but maybe worth a look.

I'd go polyurethane. I tried glueing stainless to wood and found that it was way better than epoxy. I am not impressed with liquid nails.

Steve

I've used Hybond 80 Contact Cement for a lot of wood to metal laminations in elevator cabs. I've never had a problem with delamination.

  • Author

Wow, you guys are great. I appreciate the information.

 

@Franklin Pug - Thanks for the idea about magnetic chalk board paint. My wife and I tried that stuff on another project once. Magnetic chalk board paint works ... in a word, terrible. Magnets simply don't stick to it. Plus, it wouldn't match the look I'm after for this project. But it is a good thought. When we first saw it we were like "Cool." Turns out, not so cool.

 

@Mar10 - I'm laminating the piece of plywood with the sheet metal and than using that as a captured panel. So, no edges will be exposed.

 

@TRBaker - Hey, I just happen to have some Hybond 80 Contact Cement.

==> I'd go polyurethane. I tried glueing stainless to wood and found that it was way better than epoxy. I am not impressed with liquid nails. 

 

Regular epoxy won't do all that well bonding metal to wood...  As I mentioned, there are purpose-formulated epoxies for metal to wood bonding....  

 

The latex-based glues (e.x. Liquid Nails) will work, but not long-term weather-resistant.  Liquid Nail's only real advantage is that it's cheap... Lexel is a much-better latex glue than Liquid Nails if you want to go latex...

 

Poly is a pretty good choice -- I just don't use it much anymore because for some reason, I always make a mess when using poly adhesives...

Sikaflex construction adhesive/sealant.  In Home Depot where the concrete crack fillers are over near the bags of concrete-not where all the rest of the caulking tubes are. 

Liquid Nails is a brand name. They make a full suite of latex, PL, and silicone. Simply saying Liquid Nails is not descriptive enough

  • Author

Just thought I'd update you all.
I ended up using Hybond 80 contact cement. Mostly because I had it on hand and also based on TRBaker's recommendation.

 

It worked great. The project even passed the boss's test. I was at first worried that the hard rubber roller would ripple the sheet metal, but that wasn't a problem at all. I would have no problem recommending the method to anyone.

I'll post some pics when the rest of the project is completed.

 

Thanks to all of you who offered solutions.

 

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.