Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Quick money

Featured Replies

  • Popular Post

Contractor called me for a radiator cover for a bathroom. His workers accidentally threw away the old one during the job. Contractor wanted it built with these instructions:

 

-wood 

-cheap as possible since it's out of his pocket now

-he will brush finish on himself to save money from me finishing

 

So, all I had to do was build this thing! No finish, just build. All materials I had left over from other paying jobs. Half day, 300 dollars and all profit, good day.

post-3732-0-45460000-1381462615_thumb.jp

post-3732-0-36185700-1381462621_thumb.jp

half a days work and looks better than a lot of radiator covers i have seen. nice work.

The only radiator covers that I've seen were chrome. What kind of vehicle does that one go on?

Just thought I'd ask, since you've had a pretty good amount of time to break in your tools, what are your feelings about your jointer and table saw at this time?

  • Author

Sam, the jointer is good. The table saw, I have my gripes with, but for the money it gets the job done. The faces on the fence are horrible. I have nothing to compare to, but I feel like the cast iron on this saw is soft. It is completely scratched up, and it drove me crazy at first, but I let it go for a while. If there were burrs from a deep one, I would nick it with 2000 to remove the burr. looking across the table shows different sheens from taking down burrs all over the saw. Sometimes I don't care, sometimes it drives me up the wall. I considered getting the super cool tools fence, but haven't gotten around to that yet. Nothing to do with the saw, but I wish I had room for a 50" fence, seeing that I work with sheet goods a lot. A sliding table attachment is also in order, not necessary, but will make things easier. I found out a local tool dealer had a sawstop professional on the floor, so I went to take a look. Fence rails and fence were not installed, extension tables were all crooked since someone didn't care to assemble it properly. Table looked like someone sanded it, but leaning down at table height letting the light reflect, it had a clearer mirror image then my saw, and I saw no noticeable ripples as i looked across. Hand wheels worked smoother than my grizzly. Not really comparing the two, they are both in a different price category. Just my observations that I could gather while I was there. I do wonder though, do these more expensive cabinet saws have harder cast iron tables? I don't know from experience, I only worked on my own. 

Sam, the jointer is good. The table saw, I have my gripes with, but for the money it gets the job done. The faces on the fence are horrible. I have nothing to compare to, but I feel like the cast iron on this saw is soft. It is completely scratched up, and it drove me crazy at first, but I let it go for a while. If there were burrs from a deep one, I would nick it with 2000 to remove the burr. looking across the table shows different sheens from taking down burrs all over the saw. Sometimes I don't care, sometimes it drives me up the wall. I considered getting the super cool tools fence, but haven't gotten around to that yet. Nothing to do with the saw, but I wish I had room for a 50" fence, seeing that I work with sheet goods a lot. A sliding table attachment is also in order, not necessary, but will make things easier. I found out a local tool dealer had a sawstop professional on the floor, so I went to take a look. Fence rails and fence were not installed, extension tables were all crooked since someone didn't care to assemble it properly. Table looked like someone sanded it, but leaning down at table height letting the light reflect, it had a clearer mirror image then my saw, and I saw no noticeable ripples as i looked across. Hand wheels worked smoother than my grizzly. Not really comparing the two, they are both in a different price category. Just my observations that I could gather while I was there. I do wonder though, do these more expensive cabinet saws have harder cast iron tables? I don't know from experience, I only worked on my own. 

Come to think about it, I really do think this cast iron on the table is softer as you say. I am convinced after you say the same thing. My saw has a few scratches in it, but I rarely have anything on it. But it should not scratch that easy. My dad's old contractor craftsman table saw doesn't even have a nick in it! Oh well, I can't really complain. For the money I paid for this saw, it has really made my hobby more pleasurable. In a perfect world I would have my dream shop with Powermatic machines, or just a Felder combo unit.

  • Author

Yea Sam, I am in the same boat. It would be nice to just go out and buy a PM. I also geek out over the new unisaw, it is dead sexy!!

Really nice work Freddie. Miters look tight and good choice of profiles for that era, simple but classy. The contractor is going to paint that?! What is that, ash or white oak?

  • Author

Thank you! It's red oak leftovers. The contractor said he would brush clear water based finish on it. But, he ended up delivering it unfinished. He stopped by my job today and told me the lady absolutely loved it, and she called her friends to come over and see it. She will be doing some kind of a stain/finish on it, I'm not really sure. I guess all I can say at this point is, at least I got paid haha

Thank you! It's red oak leftovers. The contractor said he would brush clear water based finish on it. But, he ended up delivering it unfinished. He stopped by my job today and told me the lady absolutely loved it, and she called her friends to come over and see it. She will be doing some kind of a stain/finish on it, I'm not really sure. I guess all I can say at this point is, at least I got paid haha

 

You may want to pop in on her and offer to finish appropriately..  For a price of course. ;)

Thank you! It's red oak leftovers. The contractor said he would brush clear water based finish on it. But, he ended up delivering it unfinished. He stopped by my job today and told me the lady absolutely loved it, and she called her friends to come over and see it. She will be doing some kind of a stain/finish on it, I'm not really sure. I guess all I can say at this point is, at least I got paid haha

A job well done with happy clients! I just finished a bathroom remodel, today was payday for me too :-)

  • Author

Tiods, I know haha, I cringe just thinking about it, I have some excellent acrylic conversion coating and my sata gun at the ready, but this is the way the contractor handled it to save money. Technically, his guys threw the old cover out so he was responsible for the payment. I have no idea what the old cover looked like, but I have a feeling the customer made out like a bandit on this one :)

Freddie i am spotting a trend here that the older ladies really like your... stuff.

Tiods, I know haha, I cringe just thinking about it, I have some excellent acrylic conversion coating and my sata gun at the ready, but this is the way the contractor handled it to save money. Technically, his guys threw the old cover out so he was responsible for the payment. I have no idea what the old cover looked like, but I have a feeling the customer made out like a bandit on this one :)

 

Doesn't mean you can't make the offer..  Decision is hers.

  • Author

Well said Tiods, but I am a honest man and I will not overstep the man who sent me the work. I will call him tomorrow and ask him to send the word through. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.