Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Red oak, or white?

Featured Replies

A while back, I purchased a load of air-dried lumber from a local sawyer. Included were several feet of red oak. I asked if he had any 8/4 stock, since all I saw was 4/4. He found one board of 8/4 oak, which he gave me for free, as it was badly warped and split on the end.

I have started building an accent table, and there was enough good stock in that thick piece to get the legs. It is beautiful, quarter sawn, with abundant ray fleck. This leads me to the question - does red oak exhibit much ray fleck? I don't recall seeing this much ever before, which leads me to suspect this is white oak. Also, the pores don't seem to be 'open' like they are in the obvious red oak I used to make the table top.

Any wood experts out there that care to offer an opinion?

My next question is how much different will red and white oak appear if the same finish recipe is used? I plan to use a dark brown over black color scheme to keep the grain contrast while still having a fairly dark piece.

Yes, quartered or riven red oak has similar ray fleck to white. Red just isn't commonly sawn quartered. One way you can tell which oak you have is to try to blow bubbles through it. Take a short length and put the end of it in a bowl of water. Then blow through the other end like a straw (you have to blow pretty hard). If you get bubbles, it's red. If no bubbles, it could be either but more likely white.

Of course there's always Peter Follansbee's method. Look at the color. If it looks white it's red. If it looks brown it's white.

==>^^^

 

Many moons ago I visited my Grandfather at his shop...

 

He took me aside and said, "It's magic"... and did the Oak-bubble thing...

 

I couldn't think how he got the straw in the wood...

 

Of course, you grow-up and there's less magic in the world... It's a shame... Could certainly use some magic from time to time... :)

I had a good bunch of red oak QS a couple years ago..  LOTS of fleck!  Beautiful stuff :-)  Here's a quick pic of one of the sample pieces I did for finishing..

 

 

post-6031-0-03064500-1361841967_thumb.jp

I'm not really a fan of red oak - it kinda smells like dirty diapers to me when I work it.

I do like white oak, however. Though my favourite new wood to work is ash, which looks like white oak. I have been using it on a few shop projects, and a bookcase, and I really like it. It takes stain beautifully, and is a joy to work with.

Sorry if I hijacked the thread a bit.

  • Author

hhhmmmm... might try the bubble test tomorrow, but for now I'm going by color. The freshly milled known red oak is salmon pink. The suspected white oak is brownish-gray. Wish I had more of it. The rays are awesome, and it has 'wormholes' to boot!

Thanks for all the tips!

Barring the bubble test, you can just look at the endgrain.  Red oak is ring porous with open pores, so when you look at it the porous ring will exhibit all or nearly all empty pores.  White oak will have most of the pores filled in, which is why it doesn't conduct air the way red oak does.  This is also why most people like white oak better, as the wood has fewer open pores to fill/room to compress and tear out.

I'm not really a fan of red oak - it kinda smells like dirty diapers to me when I work it.

 

It's not just me then. I don't mind working with it, but it does smell really weird.

Agreed that red oak tends to have a funk. If you can look at a flat sawn side and see the thin dark lines that are wood rays. In red oak they are 1/2" to a max of 1" long. In white oak they are usually closer to 2". QS they will both have the flecks, but white oaks will be larger(more desirable).

I prefer the look of white, but find myself using plenty of red especially if it ends up being rift or qs.

Also, I will have to try the bubble test, could be a fun way to mess with people. :)

It's not just me then. I don't mind working with it, but it does smell really weird.

Red oak always smells like red wine to me...

White oak smells like brown liquor

Sent from my thumbs

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.