Recommended Posts

Posted

Hey guys,

 

So after 3 years, (long, hard, serviced years!!) I need to get rid of my milwaukee drills before I lose my mind.

 

That being said, I'm looking for some drill reviews from you guys to see what the general view is.. looking to buy a brushless combo set as having 2 drills is a must for me out on site.

 

Would massively appreciate your guys opinions as i'm hoping to make the purchase within the month or so..

 

If relevant, i'm based in the UK.

 

Thanks in advance,

 

~WW

Posted

My dad got a set of Porter Cable units for $100. Impact driver and drill. I'm not sure if they are available in UK. Had them for almost 2 years now and they have seen a fair bit of use in that time. Few good drops included. Totally worth the money.

Posted

I have 7 of the little 12 volt Bosch drills. Plenty of power in a small package. All the batteries swap around so I never run out.

3 Drills, 2 drivers, a right angle and even an impact one. I get them from CPO Bosch , the reconditioned ones save me money and have been thru quality control here in th US. Most cordless tools about 1 in 100 gets checked by quality control.

  • Like 1
Posted

I don't recall Porter Cable being available in the UK, but things could have changed in the last 3 years.

 

I love my DeWalt combo set - an impact driver and a drill driver, 2 18v batteries and a charger. Had them a couple of years now and I have no complaints.

 

I suspect that it doesn't really matter what brand you get - Makita, DeWalt or Milwaukee are all good brands, provided you can get the voltage you want, and the accessories to go with.

Posted

I've currently got Bosch, Hilti and FT:

a. Hilti 20v is the most durable and very appropriate for a job site. Can drop from a 2nd floor landing and still work AOK. Expensive

 

b. Festool 18v has nice fit/finish and great for installers, but not as durable as Hilti. The CXS is a great little installer's drill/driver. Expensive, Questionable value.. Impact driver is very questionable (read as cr*p).

 

c. Bosch 18v drills and drivers are about the best deal out there -- Same quality as FT, but much less expensive

 

Used to have DeWalt, Milwaukee and Mikita -- not in the same league as those listed above... Considering the Bosch is in the same $$ ballpark, you more drill for the $$ by going Blue. Their 18v impacts are the best I've seen. Also had Hitachi -- very robust for the job site, but a bit heavy. If you're using it all day, a bit too heavy. 

Posted

I just bought 50 20V DeWalt brushless drills model DCD790 for the company I work for. I've used them side by side with the 20V brushed version and there are a few noticable differences. 

 

1) Brushless has more torque that becomes noticable when you have a large (1" or bigger) wood feeder bit in it. It will not bog down going through a 4x4 like the brushed version.

2) They have a longer run time then brushed motors. 

3) They have the wiring encased in a molded type of silicone in the handle which is more shock and water resistant.

4) They come with a slim 2.0AH battery. Pretty sure brushed version has a 1.5AH battery.

5) They have a metal chuck

6) The obvious- No brushes to wear out and less heat friction.

 

 

DeWalt has come a long way with the cordless line in the last year or so. I would agree with Trip had I not used the newest DeWalt 20v Brushless but now I'd say they are your best bang for your buck.

Posted

Cheers for all the quick responses guys!

 

I've used dewalt kit in the past and I have to say I really wasnt convinced, same with hitachi power tools, I just cant rate them at all! Granted I haven't used their whole range of tools, but the ones that I have used, I was bitterly disappointed with :/

 

One of the major draws to tools I buy at the moment are those that come with a systainer case, (Correct me if i'm wrong but this only applies to FT & Metabo at the time of this post?) It just makes it so much easier to organise tools in my van and when taking them onto site I know where everything is (bit OCD with neatness in the van!)

 

Has anyone else been buying reconditioned items and find the quality better than the factory line items?

 

Would love to hear more replies!

 

Thanks in advance,

 

~WW

Posted

>>>>I've used dewalt kit in the past and I have to say I really wasnt convinced

 

The 18V DeWalt brushed drills of last year and the newly designed 20V brushless tools that are now available are miles and miles apart in reliability, torque, ergonomics, size, and run time. They just aren't even close to being on the same playing field.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 56 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined