Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

$199 Bandsaw Scientific Study and Review

Featured Replies

  • Popular Post

I've been fretting over the purchase of a bandsaw for the past 6 months, reading every review, forum discussion, magazine article, etc.

 

For $800 I could get X, but for $1450 I could get Y with twice the resaw capacity.  But for $3000 I could upgrade to 5hp and cut a Voltzwagon in half!

 

All this fretting, and yet, no bandsaw in my shop.

 

So I moseyed over to Highland WW on my lunch break, and put $199 down on the benchtop Rikon 10-305.

 

After two grueling weeks of scientific and analytical benchmarking tests, algorithms, logarithms, and calculations, below are my findings.

 

A $199 Bandsaw is better than No Bandsaw.

 

Given the choice between something and nothing, as far as the bandsaw goes, "something" wins. And unlike my first Delta contractor table saw, which terrified me, I don't think the cheap price tag really equates to 'unsafe' either.

 

Does the fence feel cheap, sure.  Did it squeal like heck cutting 8/4 maple?, you betcha.  Was the operating manual glorified toilet paper?, oh yeah.  

 

Does it make my life easier in the shop?, Absolutely.  Can I follow a pencil line?  I sure can.

 

I had no idea how often I'd use it, but I find myself making quick cuts and trims on it all the time.  And no more clamping down for the jigsaw (or table mounting it - yikes!).  Heck, I even gave my first try at a "hand cut" bandsaw dovetail joint, and it came out pretty darn good.

 

My point is this.  I was a member of the "I wish I had a Bandsaw" club for too long, because I was comparing $800 tools to $1400 tools.  Meanwhile, every project that required a bandsaw, or involved a bandsaw cut that would have saved me a ton of time, was an obstacle for me  

 

My real comparison should have been "$199 Bandsaw vs. No Bandsaw"

 

Look, in 12 months if I want to upgrade I could easily sell it for $100.  Which equates to a $100 loss.  Or the equivalent of renting this bandsaw for $8 a month.  Not bad.

 

So in conclusion, if you're in the "I wish I had a bandsaw" club, I'd recommend the Rikon 10-305.  Or, you can buy mine for $100 in 12 months when I upgrade ;)

 

 

 

  • Replies 60
  • Views 13.8k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • I've been fretting over the purchase of a bandsaw for the past 6 months, reading every review, forum discussion, magazine article, etc.   For $800 I could get X, but for $1450 I could get Y with twi

  • wtnhighlander
    wtnhighlander

    What do you call THIS ????? [emoji1]

  • Vinny - I think your review is well written and hits the point that many seem to miss.  A tool that can get the job done is better than no tool at all.   Would I rather spend my money once?  Sure.  

I think benchtop bandsaws like that have their place. If I had the room, I wouldn't mind just dedicating my bigger saw for resawing and larger tasks while I would use the benchtop with a finer scroll blade for small to medium work.

Before I got my 14" Grizzly, I had an older Ryobi  9" band saw.  It wasn't a bad machine.  It cut MANY pinewood derby cars for workshops we hosted for cub scouts, as well as many of my own personal projects.  When I went to the 14" it was because I had out grown the saw.

 

The point being, is that I personally feel that a band saw is that if you need to go cheep on, you can still function with it.  Just know its limits.  In fact I have known of folks who have larger band saws who also end up buying a smaller 9 or 10 inch band saw, and use dedicate them with a thin blade.

I agree with you except I have been looking at the Rikon 10" and it doesn't run for $199 it runs for $299 plus shipping which is like $50-$75. So now you are up to almost $400.

Great post! It's so easy to get caught up all the hype... if you don't have festool, lie nielsen, etc.. you shouldn't be buying anything. I've been kicking this same issue around, and reading this post makes me feel a helluva lot better. I would much prefer to be in the 'have' bandsaw vs 'no' bandsaw!

Where can I find the info on this sale?

Just go to woodcraft site and check it out. When he posted it wasn't up yet but now it's showing 199 for the Rikon 10-305 model (regular 289).

Just ordered one from Amazon fulfilled by Woodcraft. 199 and 15.99 shipping. Sent to Idaho so no sales tax. I have been waiting for them to get a Jet in stock again as I have a pending order for cheap but gave up after two months. I think 199 is a decent deal

Just ordered one from Amazon fulfilled by Woodcraft. 199 and 15.99 shipping. Sent to Idaho so no sales tax. I have been waiting for them to get a Jet in stock again as I have a pending order for cheap but gave up after two months. I think 199 is a decent deal

What Jet one?

The Rikon and Craftsman are the same except the Craftsman has balanced wheels and a few other upgrades. According to a recent magazine review anyway.

- sent via Tapatalk

The Rikon and Craftsman are the same except the Craftsman has balanced wheels and a few other upgrades. According to a recent magazine review anyway.

- sent via Tapatalk

What craftsman?

What Jet one?

JWBS-10OS

Amazon was selling it for $333 with free shipping. Seems that it was never going to be in stock. Their other seller who actually had it was charging $487.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.