Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

A toy box made from walnut

Featured Replies

When looking for something to build for a young girl for Christmas Marc's new build came along. I've decided to build the toy box but will have to modify the lid according to the parents wishes. They want a place for a child to sit on, meaning a flat surface. I'm leaning towards a solid wood panel with breadboard ends. This will also mean that it won't be painted. I came across a large quantity of walnut on the weekend. It's air dried stock, partly 25-30 years old. It has a couple blemishes (someone was hungry).

A couple pictures to illustrate the progress:

A pile of wood (for about 150usd) measuring an estimated 2.5x0.5x0.4m, the beams are 12cm thick

562cd38d0d33d3ac84b9ed8c8762cfef.jpg865d46c393d84e6acd67a49b4b03b10b.jpg

Took the smaller boards for the chest and marked rough cuts.

f25c354e224d21ee15a0f98bc1f6f1ff.jpgb2790abd5b87452806169b9d391ee23d.jpg

Started to face joint the stack. One face of each piece is now sufficiently jointed. I'll continue rough stock prep tomorrow.

1a91ccb8154d344e835426441eb815ab.jpg7fe9d303be1c75e9a68646d9bfa6f596.jpg

That is some gorgeous stuff. I'll be following this one! [emoji2]

Love me some Walnut.  Looking forward to the progress.

 

+1

  • Author

It's my first encounter with that particular wood. It's great to work with. It is worth mentioning though that the particular bits and pieces are a bit rough - several knots and some sap wood will have to be taken into account.

I didn't get much done today other than edge jointing and sending everything through the planer.

post-6655-14145332921733_thumb.jpgpost-6655-14145333279594_thumb.jpg

It's my first encounter with that particular wood. It's great to work with. It is worth mentioning though that the particular bits and pieces are a bit rough - several knots and some sap wood will have to be taken into account.

I didn't get much done today other than edge jointing and sending everything through the planer.

attachicon.gifImageUploadedByTapatalk1414533278.028338.jpgattachicon.gifImageUploadedByTapatalk1414533305.881943.jpg

All that "roughness" gives walnut its character. Otherwise, you may as well use poplar and stain it dark brown. Your project is looking good!
  • Author

Guess you're right:). The stuff has a few cracks and knots though.

Did find some time tonight. Ripped everything to width, hand planed the edges and glued up the top panel.

post-6655-1414706667805_thumb.jpgpost-6655-14147067960983_thumb.jpgpost-6655-14147068341596_thumb.jpgpost-6655-14147068474079_thumb.jpg

  • 5 weeks later...
  • Author

I hate when this happens: one month later with the deadline just hours away I face failure.

A colleague fell ill and I had to substitute him on a four week business trip. I got back on Friday and despite spending as much time as possible in the shop I did not finish. I got to the stage of dry assembly (all domino construction) and fitted the breadboard ends. 3d13af75af9d9e737ba5b68f22087d53.jpg1cefc9c2a361c227eaa1fffa3a11d27e.jpgd6ec3a3e3fafdcc8a29798b2789202a3.jpgaf57d0c602abce4b6db984992609feb3.jpg

It'll be done for Christmas, but not for WWFC. :(

I've made a donation on the website.

Very nice work!  I'm sure it will make a wonderful Christmas gift!

It looks lovely. I'm looking forward to seeing the final product. I have to ask, why are the mortises cut bigger than the floating tenons in this pic?

 

d6ec3a3e3fafdcc8a29798b2789202a3.jpg

It looks lovely. I'm looking forward to seeing the final product. I have to ask, why are the mortises cut bigger than the floating tenons in this pic?

expansion and contraction
  • Author

expansion and contraction

Exactly. The mortises were cut using a Festool Domino. The mortises in the middle board are cut to exact size, the ones in the breadboardends left/right of the center are cut to maximum oversize (using one cut). This has worked for me in the past and I hope it does so this time. 

 

I did spend some time in the basement tonight. One of those frustrating moments in hobbiest woodworking:

-I used a sprung joint for the breadboardends but apparently I overtightened the center clamp. The entire assembly is now bowed (mostly the breadboard ends...)

-I have a small Metabo table saw with a sliding table attachment which, at some point, will cause me to drop woodworking... There are no positive stops for the angle adjustment and so it is cubersome to keep it square. Despite checking and testing I managed to cut my rails/styles/sides to length out of sqaure. Makes for a lot of fiddling and some comprise during assembly (i.e. gaps). German table saws are somewhat different from what is available in the US. Cabinet saws and the like are an unknown. Industrial grade saws are exclusively sliders (think Hammer or Felder). My options as such are down to building a crosscut sled (a solution for problem that should exist in the first place), buying a mitre saw (no interest and space), buying a slider (expensive and impossible to get into the basement of my apartment building:); the affordable stuff is sold by different brands and largely made in the same Chinese factory. I have not been impressed with what I have seen, used oldies are far too bulky and heavy).

-I rabbeted parts of the rails and styles for the chalkboardpanel. Lacking a router table I did so using a parallel guide. Whilst climb cutting towards my mark (1/2" or so) it overshot the mark twice...

 

Oh well...

 

Remaining steps:

-cutting + template routing the arches (finger protection)

-sanding + breaking edges

-(pre)assembly (that will involve a hammer...)

-finishing (Osmo) + painting 

 

@ Marc and Nicole: Thank you very much. That certainly does mean a lot. The donation come through none the less:).

  • Author

Some progress on the last two evenings:

-built templates for the curves (jigsaw, patience, sandpaper). I did use too thick material though...

-built an impromptu router table (I.e. A bit of plywood with the holes in it that now resides in the wing of my table saw (lacks a fence and a safety switch (shame on me)

-managed to paint the panels

-cut the rails (jigsaw + pattern bit)c9a9091038bc9976bbf0bb6827819822.jpgdf8f1e60232519711752f621647eb4c4.jpg

  • Author

update:

-all bits routed

-panels sanded, cracks discovered

-epoxied several bits

Next: more sanding :/, pre-assembly

  • Author

It's in the clamps...

df75ff656faf30c50057b535404a77b2.jpg

Time bro work out the lid construction (ie hinges or not)

Going to be one nice toy box for sure!

  • Author

First coat of finish is on (Osmo).

1ca82089b8c2eec7f3bdaf68104426ad.jpg

85f273d9cd87193b6471d242352d844c.jpg

Does anyone spot the ....*****

Does explain why I had trouble assembling that thing... Had to do a lot of rework because joints weren't flush. There's a gap it two too:(

Don't sweat it. That gap will be filled with boogers and Cheerios in no time.

I still haven't started mine :0

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.