Recommended Posts

Posted

I think I'm gonna get rid of my 30 gallon compressor in order to free up a little more shop space.  I also want a new pin nailer (all I have is a brad nailer right now).  The only thing I use the compressor for IS that brad nailer, and on rare occasions, to air up a low tire in the driveway.  A little pancake or hot dog compressor can do both of those things, so the big tank is gonna go.  Waste of space for my needs.

 

Started looking around at pinners and compressors and combos, then stopped...figured I'd ask for opinions here before I went further.

 

Is the Grex really all that?  Seems to be about twice the price of the rest of them.  Don't see them in a combo either.  But y'all know I don't have a problem throwing my money at tools.  On one hand it won't get much use...on the other, I'd like it to work perfectly when it does.  I'd like to hear a solid argument for the Grex.

 

Looking at this one...

 

http://www.amazon.com/Grex-P635-8-Inch-Length-Headless/dp/B000FP8NH2/ref=sr_1_3?ie=UTF8&qid=1419629656&sr=8-3&keywords=pin+nailer+grex

 

What about Senco?  This one gets good reviews and the price with compressor is attractive...

 

http://www.amazon.com/Senco-PC0974-Micro-Pinner-Compressor/dp/B0006FJU3M/ref=sr_1_3?ie=UTF8&qid=1419629593&sr=8-3&keywords=pin+nailer+combo

 

Open to any other experienced-based opinions!

 

Go!

Posted

I have the Grex pin nailer and love it. It feels good in the hands and it's easy to see where you're shooting the pin.  The Amazon price is a good one. I paid quite a bit more for mine a few years ago.  I have no experience with the Senco.

Posted

I have a few Senco nailers and love them!  I do not have the pinner tho.  Senco has been the standard for nailers for many many years!

 

I also have a Makita over/under compressor and really love that thing.  6 second recovery time.  It's about 23 years old now and still running strong! 

Posted

I have the PC pinner and it works just like it's supposed to (no jams, etc).  Had it about 7-8 years.  IMO I don't think this is one of those things where you'll see a night and day difference between brands.  That being said, it's the only pinner I've used ^_^

Posted

I have the ridgid Pinner, and I must admit its pretty darn good. It does what it is supposed to do, at a reasonable cost. The only drawback is the lack of tool-less jam clearing (though I have never had a jammed pin).

https://www.ridgid.com/ca/en/23-gauge-headless-pinner

As for a compreasor, I have the small dewalt unit. Its very light and portable. It has never failed me when running any nail gun (pin, brad, finish).

http://www.dewalt.com/tools/compressors-hand-carry---electric-d55140.aspx

Posted

Something to consider:  Make sure the pinner you choose has compatible pins available at the big box stores. Nothing worse than being in the middle of a project and having to order proprietary pins. I don't own a pinner, but have run into this problem with nail guns before.

Posted

I have the PC but have only used it for crown molding work.  Loved it for that.  The compressor is loud and I'm considering getting something new for the shop.  I've had my pancake unit for about 15 years.

Posted

The little compressors that move a decent amount of air are   LOUD!!!    Senco has been my go-to for nail guns for 4 decades.  I needed a 23ga. quickly for a job, and grabbed a Bostitch at Lowes.   It's served me well for several years, with no problems, and never a misfire.  My Senco 18 ga. is probably over 20 years old, and still works fine.  I wouldn't pay Grex prices unless I needed to use it many hours every week, or needed some of the longer lengths they offer.

Posted

Thanks for the insights and opinions, everyone.  I think I've narrowed it down to the PC or Senco.  For the limited use this thing will see, no point in going top-of-the-line.  As long as it fully sinks a pin where I want it to go, good 'nuff.  The reviews on both are solid.

 

Tom, part of the reason I'm getting rid of my 30 gallon and downsizing, aside from freeing up space, is so I can put the new little one up in the attic and as far away from my ears as possible.  Of all the tools that I find annoying, nothing is worse than a compressor.  Nothing.

  • Like 1
Posted

I bought this set at lowes when I was building the house, been using them a couple years now with no complaints and they dont seem to care what nails you put in them

 

http://www.lowes.com/pd_461681-47120-SGY-NR-KITC_4294813348__?productId=4771555&Ns=p_product_qty_sales_dollar|1&pl=1&currentURL=%3FNs%3Dp_product_qty_sales_dollar%7C1&facetInfo=

 

not sure but it my also come in a bigger combo with a compressor

Posted

Thanks for the insights and opinions, everyone.  I think I've narrowed it down to the PC or Senco.  For the limited use this thing will see, no point in going top-of-the-line.  As long as it fully sinks a pin where I want it to go, good 'nuff.  The reviews on both are solid.

 

Tom, part of the reason I'm getting rid of my 30 gallon and downsizing, aside from freeing up space, is so I can put the new little one up in the attic and as far away from my ears as possible.  Of all the tools that I find annoying, nothing is worse than a compressor.  Nothing.

 

Agree completely!  The compressor just grates on my nerves..  So I put it in the garage and pipe it into my shop.  Plus, I only turn it on when I'm going to use it.

Posted

+1 for Porter Cable, I've got the PC and a Freeman 1" pinner. Both work as they're supposed to, the PC is the nicer of the 2 I have. 

 

You can pick up a PC refurbished pinner for $75 right now from Woot (Amazon subsidiary)  I bought a PC crown stapler and PC brad nailer from them that were both refurb, and they are like brand new when I got them.

 

http://tools.woot.com/offers/porter-cable-23-gauge-1-3-8-pin-nailer-6?ref=cnt_wp_1_13

Posted

Surprisingly the 23 gauge pinner they sell at Harbor Freight is good for 3/8 to 1" pins. I've got a several of them. Very handy to have different length pins set up in each gun.

The Grex that shoots up to 2" pin is awesome but almost $300.

Can't go wrong w Senco if it's that or PC.

Posted

I have a bostich and a grex both work well if I had it to do over I would not have bought the grex the bostich is great. For a compressor I would just make sure it's not oil less. An automatic drain solenoid is cheap and easy to install. Run it out side and forget about it. Something like the emglo is all you need for pins, staples or brads.

Posted

I've had one of those tubing kits laying around for a couple years but never installed it...but I'm planning to when I get the new compressor in the attic.  Comes with such and such feet of tubing, some junctions, and some petcocks to drain the moisture out.  I'm interested in the automatic drain solenoid though...more details on that?

 

Also, why not oil-less?  Aren't they lower maintenance?  Keep in mind I'll turn this compressor on about twenty times a year.  The cheapest Emglo I'm seeing is two and a half times more than the little Senco I was looking at...

 

Do you guys find the need to shoot 2" pins that often?  99.9% of the time I'll be using it to build jigs out of 1/2" and 3/4" sheet goods, so I don't need 2" for that.  And I do have a brad nailer.  The 2" guns jump quite a bit in price.

Posted

Pins are really only good for wood on wood and just hold while the glue dries. The short ones are just fine. Drain solenoid are nice. Pull the drain valve install a barb and run a hose with valve outside. They blow out moisture on a timed interval. Great for attic installs. Oil less are loud and don't last long. You don't want to hard plumb or use long hoses with oil less you will just burn up the compressor.

Posted

Drain solenoid are nice. Pull the drain valve install a barb and run a hose with valve outside.

 

Is there a cheap one you can recommend?  Prices seem to be all over the place and I don't really know what I'm looking for.

 

Will these things eliminate moisture in an entire plumbed system, or will I still have to install additional drains?

 

I'll probably take the gamble with a cheaper compressor and upgrade if it dies.  It's really gonna see minimal use.  Very minimal.

Posted

The pc $199 4 gallon special is actually an emglo. No the drain valve has to go on the bottom of the tank to do its job. Line air comes from the top. If you make all straight drops just use a air gun to clean lines. You will have little to no water in the lines with a auto valve on a tiny compressor. I'll check my valve to see what brand it is. It's been on my 80g industrial compressor for 10 years and still works every hour on the hour.

Posted

Cool, thanks.

 

Are you talking about this one?

 

http://www.lowes.com/pd_470437-70-PCFP02040_0__?productId=50015924&cm_mmc=search_google-_-Tools-And-Hardware_rtc-(1)-_-Porter-cable_pcfp02040-_-porter%20cable%20pcfp02040&k_clickID=3d91cb72-c8f3-48d1-992c-57bdd61c9fc8

 

885911329316.jpg

 

 

And I'm hearing you correctly that if I installed an auto drain solenoid that I wouldn't have to worry too much about moisture collecting in the lines?  Just give it a kick with an air chuck every once in a while?  That sounds good to me!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   0 Members, 0 Anonymous, 45 Guests (See full list)

    • There are no registered users currently online
  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined