Enclosed spaces Posted February 14, 2015 Report Posted February 14, 2015 I purchased the Ridgid r4512 tablesaw on Tuesday this week. Got it all set up and proceeded to doing the fine tuning. Not going to happen. The blade to mitre slot alignment is out, and not by thousands of an in but a full 1/16 of an inch. This can not be fixed short of removing the grunion from the saw completely, dilling or filing the guide holes and then replacing the trunion. Phoned the service centre and explained my problem, they are sending a replacement trunion. Will still have to remove/replace but will at least have a working saw, which I don't at the moment. Real pain in the butt though. A 16th of an inch is just sloppy workmanship. Totally unacceptable Ridgid. At first they just directed me to return to the nearest service centre ( 2 ferry rides, a truck rental and over $300 cost) ( would be roughly the same cost to return to where I bought ). So not a happy customer, at least they agreed to send the new part at no cost. Quote
wtnhighlander Posted February 15, 2015 Report Posted February 15, 2015 Sorry to hear that, those saws usually get good ratings. I have a (much) older Ridgid saw, and it performs beautifully. Quote
knotscott Posted February 15, 2015 Report Posted February 15, 2015 Are there other options available to you if you returned it? Like the Delta 36-725 from Lowes? Quote
tim0625 Posted February 15, 2015 Report Posted February 15, 2015 Wow....2 ferry rides! Sounds like you live anywhere BUT "Enclosed Spaces"! So I gather it was a new table saw? Quote
Enclosed spaces Posted February 15, 2015 Author Report Posted February 15, 2015 Brand new saw, right out of the box. Living on the Sunshine Coast , B. C., had to rent a truck, catch a ferry, drive to the closest H.D. Where they had the saw in stock, then return home. Full day trip. Could have had a General International delivered to another store (Rona ) at twice the price, or purchased one from another store at 3 to 4 times the price. Not a lot of choices here. Funny thing is I was buying a new saw because my old one needed to be taken apart and have parts of the trunion rebuilt and I just couldn't handle all the work. ( old age and arthritis suck). I did read about the alignment problems, but thousands of an in out was to me acceptable, not a full 1/16 th. Can't even cut a straight line when something is much out, much less do any serious joinery. Quote
RichardA Posted February 15, 2015 Report Posted February 15, 2015 Brand new saw, right out of the box. Living on the Sunshine Coast , B. C., had to rent a truck, catch a ferry, drive to the closest H.D. Where they had the saw in stock, then return home. Full day trip. Could have had a General International delivered to another store (Rona ) at twice the price, or purchased one from another store at 3 to 4 times the price. Not a lot of choices here. Funny thing is I was buying a new saw because my old one needed to be taken apart and have parts of the trunion rebuilt and I just couldn't handle all the work. ( old age and arthritis suck). I did read about the alignment problems, but thousands of an in out was to me acceptable, not a full 1/16 th. Can't even cut a straight line when something is much out, much less do any serious joinery. Old age and arthritis sucks, I know! Having the mentality of a 30 year old makes it suck even worse. 1 Quote
dodgeram99 Posted February 16, 2015 Report Posted February 16, 2015 That sucks. I have had the same saw for 3 years. With no problems Quote
Enclosed spaces Posted February 20, 2015 Author Report Posted February 20, 2015 Had a machinist come over today. He had the saw apart and back together in no time. Parallel to the mitre slots now. Finally a happy camper. All is again good in Lotus Land. 1 Quote
Coastyboy Posted February 20, 2015 Report Posted February 20, 2015 sounds like a beautiful place to live. Lots of fresh fish to eat? I lived in Mt. Vernon, Wa. for nearly 10 years Quote
Coastyboy Posted February 20, 2015 Report Posted February 20, 2015 Had a machinist come over today. He had the saw apart and back together in no time. Parallel to the mitre slots now. Finally a happy camper. All is again good in Lotus Land. Glad all is well, I just looked up pictures of your area, wow, I forgot how gorgeous it is out there, Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.