Recommended Posts

Posted

Im contemplating buying a second bandsaw. I hate having to swap blades on my saw. i want to keep the one i have for ripping, resaw and setup a small one with a 3/8 3tpi blade full time for curves.  Any of you guys setup like this? i don't get a lot of time in the shop and i want to minimize wasted time. I swore id never buy another Chinese made Laguna product but people seem to really like the 1412. My dealer has a laguna 1412 in stock and a powermatic 14". Both are the same price. I don't need a ton of power or resaw capacity. Any thoughts?

Posted

I have a 10" bandsaw, (Craftsman, but the same saw is sold under several brands), that is great for curved work. If I were in your situation, but in MY workspace, I would consider a saw smaller than 14", for enhanced mobility. I can easily stash mine on a shelf when not in use, and set it on my workbench when needed. However, I'm dealing with space restrictions that you may not have.

Posted

I have a 10" bandsaw, (Craftsman, but the same saw is sold under several brands), that is great for curved work. If I were in your situation, but in MY workspace, I would consider a saw smaller than 14", for enhanced mobility. I can easily stash mine on a shelf when not in use, and set it on my workbench when needed. However, I'm dealing with space restrictions that you may not have.

My shop is pretty small also. I do have a small hole that i think could work for a 14". I definitely dont want to get something that is overkill but i would like to buy it once and it last me a long time. Is that little 10" very limited? You can cut curves in all hardwoods? Even 8/4? Can it handle bandsaw boxes?
Posted

Shaney, I have the 1412 and really like it.  It has more then enough power for everything I have done with it so far especially when it comes to curve work.  I am happy with the dust collection given this isn't a strong point of any bandsaw.  I got it with their mobile base and that works real nice although my saw has come to a some what permanent blade  in the shop because of the dust collection ducts.

 

I followed you "saw from hell" thread with your other Laguna, maybe the way to look at it now is you have had your one, but a BIG one, glitch with Laguna.

  • Like 1
Posted

Any reason you need to go big? The grizzly g055 with Carter upgrade is a great curve Cutter with a small footprint, decent dust collection, and is pretty quiet.

No reason. I never considered anything smaller than a 14". I never owned one smaller. Also, its what my guy has in stock.
Posted

The grizzly is a 14" saw.

I'm just thinking, you have the 1412 which I'm guessing you will be using with a ripping blade. Curves and a smaller blade aren't going to need the larger platform or power.

Posted

The grizzly is a 14" saw.

I'm just thinking, you have the 1412 which I'm guessing you will be using with a ripping blade. Curves and a smaller blade aren't going to need the larger platform or power.

No i have a bigger bandsaw. The 14" would be the smaller one of the 2. I have an italien 18" laguna. I have that setup with the 1" resaw king blade and driftmaster fence for resawing. I just want a decent second saw that is good for curved work.
Posted

The grizzly is a 14" saw.

I'm just thinking, you have the 1412 which I'm guessing you will be using with a ripping blade. Curves and a smaller blade aren't going to need the larger platform or power.

I just realized why you think i have the 1412. I originally bought an lt18 3000 amd it was a pos. Sent it back and got the 18" italian made saw. Thats why j said i swore to never buy a Chinese laguna again.
Posted

I have two.  17" Grizzly and a 1412.  If you have the money and the space, it's great.  My only regret is not buying a 20" or bigger instead of the 17".

Posted

I have two. 17" Grizzly and a 1412. If you have the money and the space, it's great. My only regret is not buying a 20" or bigger instead of the 17".

Eric, what made you decide for the Laguna over powermatic?

Sent from my XP7700 using Tapatalk

Posted

I have two. 17" Grizzly and a 1412. If you have the money and the space, it's great. My only regret is not buying a 20" or bigger instead of the 17".

And what's your blade setup on each?

Sent from my XP7700 using Tapatalk

Posted

The PM costs more but isn't any better, IMO.  Don't let the gold paint taint.

 

1/2" on the 17", 3/16" on the 1412.  I've been planning to put a bigger blade on the 17", but I've been having issues with it and I don't wanna ruin a good blade on the crap saw.  I'll put a 3/4" on there eventually when it's running right.

  • Like 1
Posted

I have the 14" Grizz and the 17" Grizz.. The G0555 (14") has been a really good saw for me.

I would probably look at grizzly if they were available here. I know can ship it up but would cost an arm and a leg.

What's your blade setup on both saws?

Sent from my XP7700 using Tapatalk

Posted

My shop is pretty small also. I do have a small hole that i think could work for a 14". I definitely dont want to get something that is overkill but i would like to buy it once and it last me a long time. Is that little 10" very limited? You can cut curves in all hardwoods? Even 8/4? Can it handle bandsaw boxes?

My little saw cuts most woods well enough with a sharp blade. Max material thickness is about 3 3/4". You might find the 10" throat depth (?? right term for space from blade to frame ??) a bit limiting, as well.

I find it works well for my, so far.

Posted

I would probably look at grizzly if they were available here. I know can ship it up but would cost an arm and a leg.

What's your blade setup on both saws?

Sent from my XP7700 using Tapatalk

 

I use the woodslicer on both..

Posted

I would probably look at grizzly if they were available here. I know can ship it up but would cost an arm and a leg.

What's your blade setup on both saws?

Sent from my XP7700 using Tapatalk

I don't know if it is true for your location, but I have been pleasantly surprised with reasonable prices from freight shipping companies as compared to the likes of UPS or FedEx when it comes to heavy machinery.  It might be worth checking on the shipping options/costs before you dismiss any brands based on shipping costs.

Posted

So i made mt decision and purchased the laguna 1412. Just got it delivered. Worked on modifiying the dust collection and adding the electrical for it today. I got a 3/8 3tpi blade with it. Cant wait to see this baby cut some curves!

post-16857-143709500895_thumb.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 43 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined