Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Sharpie on wood

Featured Replies

I'm making a shadow box for my wedding. I'm making stars instead of hearts I'm gonna make stars and guests will sign them instead of signing a book. Has anyone written on pine with a normal sharpie? Does it bleed at all? I'm making the stars tomorrow and gonna stain them with a natural stain. The wedding is in 2 weeks. I just wanna make sure the marker ink won't bleed into the wood after the wedding and if so what kind of marker should I use?8df04f3d4c7630fe4b35063d97c06ba2.jpg

Sent from my SCH-I545 using Tapatalk

I would try a coat of dewax shellac, then use your sharpie. Test in scrap first.

I have used sharpie on line before (raw wood) and I did experience some bleeding.

I agree with Pug but, I would add....Don't top coat the names with shellac. The alcohol will cause the ink to smear.

I would either leave everything alone as is, or use a rattle can of polyurethane to coat and seal and protect the names.

Rog

I don't know the answer, but, that's a neat idea. Congrats to you and your bride!

Maybe I should clarify. I was thinking shellac, sharpie, and then poly top coat. Spraying your topcoat like Roger suggested is a good idea.

If they will live in the shadow box, why topcoat? Experiment with shellac first and the Sharpie. If results are bad, try lacquer first and then Sharpie. You won't have to worry as much about greasy fingers that way.

As others have said above do not use shellac. I had a similar project and finished it with poly and then wrote on them with a permanent sharpie and it has held up well for 3 years with no topcoat.

Use spray lacquer. I use rattle can lacquer on my plaques I make and they are then signed with a sharpie and experience 0 bleeding. I recommend to use a fine point though as it looks better.

  • Popular Post

Some examples on different woods: All woods were unfinished when the sharpie was applied, then a top coat was applied. Either wax or ARS. 

 

Koa -

10488376_10204346225203917_4609286702095

 

Ebony - Signed on the sapwood.

 

10734015_10205428699505098_7432227895718

 

 

Padauk - 

 

11720266_10207310316824355_600242791_o.j

  • Author

Well I'm making about 125 Stars about 4 inches tall out of scrap 2x6 lumber. How many cans of spray lacquer do you suppose I would need to buy? I'm getting the stars cut today and will probably stain them Friday morning and spray them Friday afternoon.

Sent from my SCH-I545 using Tapatalk

Well I'm making about 125 Stars about 4 inches tall out of scrap 2x6 lumber. How many cans of spray lacquer do you suppose I would need to buy? I'm getting the stars cut today and will probably stain them Friday morning and spray them Friday afternoon.

Sent from my SCH-I545 using Tapatalk

2-3 depending on how big the stars are and how many coats.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.