Recommended Posts

Posted

Bought a new Laguna 14 SUV through Woodcrafters. It arrived packing in tact, etc. But when unpacked found upper door badly dented near upper hinge and motor package crushed with cast pulley broken. 

To spare your time I'll summarize: 3 mo.s of working with Laguna techs has resulted in a new door, then after unsuccessfully trying to install the pulley and ruining the motor shaft (following their direction reluctantly) a new motor, and since being unable to set up for accuracy it has finally been determined by Laguna that this saw was hit hard enough before I received it to alter the housings for the guide shaft and needs to be replaced. It's what I suspected all along, but went through the very time consuming exercises they asked of me. Also chewed up 2 new blades in the process. 

They have insisted that it is my responsibility to get it back to woodcrafters and pick up the new one. 

Dilemma, I do this professionally, have missed a ton of work all ready both in time wasted and inability to use this needed tool not to mention destroyed wood and work attempting to use it. I'm a one man show, barely scraping by, and don't see a way, or feel I should, have to figure out and pay further for the logistics of arranging transportation.

Both Laguna and woodcrafters have refused what might amount to  $150 tops to help make this right citing that they already have spent time and now have to "eat the saw". No management from either company will even call me. 

I have commissions waiting for which I need a bandsaw, I've lost some that couldn't wait. 

Can anyone in the community of woodworkers offer some advice? 

Thanks, a struggling woodworker.

Ps, thought you might enjoy a pic of the timber frame shop I've designed and built over the last year. 

rps20150808_103244.jpg

Posted

I had similar problems with a laguna lt18 3000. Total piece of crap. There is a thread on here about it. Very long story short. They took back the saw and paid the shipping. On my next purchase they gave me the driftmaster fence for free as well as the mobile base. Im not sure why you are getting the service you are but my experience with their service was that they went above and beyond. I now own 2 laguna bandsaws one italian and one chinese and am very happy with both. All to say, if i were you i would go back to woodcraft and have a talk with the manager and try to get shipping included.

  • Like 1
Posted

Well, at least we know where Shane’s saw went...  :)

 

The packaging was intact, but the saw was dented? That’s odd... Very odd... And suspicious...

If I understand your situation, Laguna’s decided to exchange the saw, but you need to get the saw back to Woodcraft. It may cost you $150.

I find it hard to fathom this scenario. Laguna’s customer service refuses to send you a shipping voucher when they decided to eat the saw? I believe Brian Bennett is still the supervisor in Laguna’s Customer Service. He’s pretty reasonable. I’d call Laguna CA, get the operator and ask for him...

If you paid by cc, I’d contact them and stop payment. If more than 60days, I’d contact their fraud department – with some cards, that gives you 90days to challenge purchases... With a dented saw and no damage to the packaging, I’d be rather suspicious and convey that to the card company.

 

Good luck.

 

  • Like 1
Posted

Someone needs to reach out to their social media manager with the accusation that someone in their company is shipping damaged goods. It is in their best interest to sort that out and quickly. Hot link to these two Laguna threads. Already, these threads could come up in a Google search. 

  • Like 1
Posted

Just heard from Jim Ford, owner of Woodcrafters Portsmouth NH. Said will exchange saw, but no help from him or Laguna with transportation. Then hung up on me. 

When I called Woodcrafters to say I'd be down to get the replacement I was told I would have to sign a release form. I have never had to do any such thing and it would negate warranty. 

I'm opting for a refund and will buy a bandsaw elsewhere. 

Thanks for replying. 

I had similar problems with a laguna lt18 3000. Total piece of crap. There is a thread on here about it. Very long story short. They took back the saw and paid the shipping. On my next purchase they gave me the driftmaster fence for free as well as the mobile base. Im not sure why you are getting the service you are but my experience with their service was that they went above and beyond. I now own 2 laguna bandsaws one italian and one chinese and am very happy with both. All to say, if i were you i would go back to woodcraft and have a talk with the manager and try to get shipping included.

Someone needs to reach out to their social media manager with the accusation that someone in their company is shipping damaged goods. It is in their best interest to sort that out and quickly. Hot link to these two Laguna threads. Already, these threads could come up in a Google search. 

I'm lost with social media. How do I "hot link"?

Thanks

Posted

I've been told laguna stipulated I inspect replacement saw and sign off as a condition of replacement. I'm uncomfortable with that as problems with accuracy will show up only after setup and use and I won't have that opportunity. 

What does the group think? Is this fair? 

Posted

I've been told laguna stipulated I inspect replacement saw and sign off as a condition of replacement. I'm uncomfortable with that as problems with accuracy will show up only after setup and use and I won't have that opportunity. 

What does the group think? Is this fair? 

You sign off on esthetic damage. That does not void your warranty. I would be as cooperarive as possible and trust them. I have had some issues with the free driftmaster fence they gave me and they have replaced parts happily.
Posted

 

Well, at least we know where Shane’s saw went...  :)

 

The packaging was intact, but the saw was dented? That’s odd... Very odd... And suspicious...

If I understand your situation, Laguna’s decided to exchange the saw, but you need to get the saw back to Woodcraft. It may cost you $150.

I find it hard to fathom this scenario. Laguna’s customer service refuses to send you a shipping voucher when they decided to eat the saw? I believe Brian Bennett is still the supervisor in Laguna’s Customer Service. He’s pretty reasonable. I’d call Laguna CA, get the operator and ask for him...

If you paid by cc, I’d contact them and stop payment. If more than 60days, I’d contact their fraud department – with some cards, that gives you 90days to challenge purchases... With a dented saw and no damage to the packaging, I’d be rather suspicious and convey that to the card company.

 

Good luck.

 

 

thanks, I left a message for Brian Bennett. Hope he will help. As it is, Woodcrafters advised that even if I bring down Laguna has stipulated I sign a release as a condition of replacement. I don't think that is either right or legal. 

Posted

Thanks all for your replies. I haven't given up on Laguna yet. I did share this thread in a customer case (they don't have email contact) and also on their Facebook. Watch out for us old guys, we're social media idiots and don't know what we're doing. Much better with a chisel and mallet and most of my tools...bandsaw temporarily excluded.

Hope I did it right. Will post resolution...hopefully Monday!!

  • Like 1
Posted

A bit off point, but I'm interested...

Was the saw shipped from Laguna's depot directly or was it an inventory item at Woodcraft? From your description, it sounds like a local inventory item... Maybe that's why Laguna is keeping their distance -- inventory was transferred (by some sort of sales transaction) to Woodcraft for end-user commercialization... Depending on the transaction, it may be Woodcraft's financial problem... Not that it changes your situation -- you just want a new saw -- but it may explain why Laguna just didn't ship you a new saw from CA...

As a side note, I won't purchase stationary tools from end-user entities like Woodcraft -- I get them shipped from the factory or large eqpt depot (I used to buy from Force Machinery when they were still in business). You pay about the same, but the upside is there is only one place to point a finger if something goes wrong... For the heavier stuff, the larger eqpt guys have riggers...

 

  • Like 1
Posted

I ordered it through Woodcraft. Picked it up still packed when it arrived.

Good advise on going direct. I will from now on.

I still don't understand Woodcraft saying that Laguna required I sign off on some sort of release to effect the exchange. I have a call into Brian Bennett (who I've heard good things about from others -- Benny) at Laguna to see what this is about. I also asked Woodcraft to email this to me, but they said they can't do that until Mon when they talk to Laguna?? Feels a little fishy to me.

Talk about feeling like the monkey in the middle! Sheesh!

Posted

==>some sort of release to effect the exchange

I've heard that from more then one Woodcraft customer -- so, not that unusual... They want you to inspect the saw and sign-off on cosmesis. What they don't want is you get it home and notice a scratch in a big panel requiring replacement. You still get warranty parts/repairs. I suspect the calls back/forth w/ Laguna involve the financial side of things... Someone is going to eat the saw... Or maybe it'll be repaired, repackaged and shipped to the next unsuspecting customer... :)

  • Like 2
Posted

Thanks again. It sure would be nice to go hassle free though. There was a time when companies spent more effort attending to the customer and less on CYOA if you get my drift. I think I speak for most competent woodworkers when I say that we still subscribe to those traditional values, so it's hard when we're not treated the same.

  • 1 month later...
Posted

So Peter,

What was the eventual outcome.  Did you ever get satisfaction from Woodcraft/Laguna?  Or should we write off the idea of buying from either?

Hi Mark,

Laguna stepped up and sent me a new saw. They even set it up it in CA to run some cuts and make sure it's right. 

Woodcraft, forget it. This owner actually went out of his way to call me from FL just to say they wouldn't do anything besides the minimum. They've seen my last nickle. Woodcraft is not a place for professionals. 

Posted

Hi Mark,

Laguna stepped up and sent me a new saw. They even set it up it in CA to run some cuts and make sure it's right. 

Woodcraft, forget it. This owner actually went out of his way to call me from FL just to say they wouldn't do anything besides the minimum. They've seen my last nickle. Woodcraft is not a place for professionals. 

Good on Laguna to replace the saw. I'm sorry to hear about your experience with Woodcraft. The guys at my local Woodcraft are aces, they all know me in there and I've been a good customer. I brought back a laguna bandsaw blade because it was not cutting right, after I made some cuts with it. They're very willing to help with any issue I've had. Chalk it up to poor customer service on the part of the employees.

Posted

Yeah, Woodcraft is a franchise so your experience will vary from store to store.  Ours was a complete disaster up until a couple years ago when it was taken over by a pair of new owners.  Since then it's been slow but steady improvement.  I really like one of the new owners...the other I'm lukewarm about.  People are people.  Just like any other profession...some good, some bad.

Posted

Hi Mark,

Laguna stepped up and sent me a new saw. They even set it up it in CA to run some cuts and make sure it's right. 

Woodcraft, forget it. This owner actually went out of his way to call me from FL just to say they wouldn't do anything besides the minimum. They've seen my last nickle. Woodcraft is not a place for professionals. 

My last too.  I don't care if it's a local franchise problem, I don't need to worry about dealing with any franchise when the same stuff is available at other places with great service.  When you work for a living depending on companies, you have to be sure they won't let you down.   Sorry you had all this time lost.

Posted

What a well-traveled bandsaw: from Shane to Peter to...

Anyone want to purchase a bandsaw?

I believe Woodcrafters is having a sale on Laguna floor models... :)

  • Like 2

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 43 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined