Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Adrift at sea with no jointer

Featured Replies

I have faith in God and modern adhesives :rolleyes:

 

Sarcasm aside, at what point do you worry about gappy joints? With moderate hand squeezing, I was able to close up the joint gap. I don't have ten years of empirical evidence to back it up, but I feel confident that a cured long grain glue bond would laugh at the force at which that board wants to pull away. At what point does a sprung joint go from desirable to detrimental?

 

Probably a post for another thread! Mods, please don't beat me.

My comment was tongue in cheek - honestly I don't know.  Adhesives are strong and will likely hold the joint, but you might find checking in the areas adjacent to the joint.  1/8" over 8' doesn't sound like much and if you can close it with hand ressure maybe you will be alright.   Personally, I don't believe in sprung joints.  I'd rather get my joints tight enough so I don't see daylight and glue with as little clamping pressure as possible.    I know that was not possible for you right now.  And even it it does open, it might not be noticeable on a large bar top.  A small gap on a side table will show, that same gap on an 8' bar will not be noticeable, especially to the blurry eyed people sitting at it :)

Edited by Guest

Sprung joints were invented for people who couldn't mill a straight edge or who didn't have more than one clamp.  If you have neither of these issues, there's no benefit in it.  I'm with Mike...straight boards are the way to go.

Springing joints is about the mechanics of drying and recognizing 'truly flat' as an Engineering concept, not a real world condition. In the real world, you have convex and concave, not flat...

 

Think about edge joining flat to rift sticks in a single panel -- most do it without thinking --- and get away with it due to modern adhesives. But it's not best practice and the panel may not (read as probably not) survive the test of time...

 

That being said, I don't intentionally spring joints -- but I do verify that they are not convex prior to glue-up... Why ask for trouble? So my method is more of a passive springing (if that's a word)... The last project I intentionally sprung was a 10' dining table top --- even at that, it was more about belt&suspenders than anything else...

Edited by hhh

Think about edge joining flat to rift sticks in a single panel -- most do it without thinking --- and get away with it due to modern adhesives. But it's not best practice and the panel may not (read as probably not) survive the test of time...

 

I'm probably being dense, but can you explain this?  What's the issue with joining flat sawn to rift sawn?

I was without a jointer for about a month this year.  Long story, but i was supposed to buy a used one, sold mine, and then the used one was gone.  So I said "screw it" and bought a powermatic.

I milled all my parts by hand for those three or four weeks (though i still used my lunch box planer).  It's amazing how much use a jointer gets, and how much sweat and exhaustion it saves.

It also REALLY forced me to be much more selective in my lumber purchasing.  There was no way i was buying a stick that needed loads of flattening, no matter how nice it was!

Edited by franklin pug

  • Author

I like when things arrive ahead of schedule. Too bad I had to drive home from the office and proceed to push and pull this hunk of metal for 35 mins up my driveway. I still don't know why the driver didn't want to back up my driveway, but I deferred to his professional opinion. The dang pallet jack couldn't pick the entire machine up off the ground, which is why the dragging and grunting ensued. Traction in Too Boot's Italian leather soles is nill, absolute nill.

 

Time to pray that phase II of the move goes much more smoothly.

IMG_1247.JPG

  • Author

Phase II was a resounding failure. Well, not resounding, but the wheel breaking was a blow to the plan. At one point I had the jointer half way in the garage and halfway out of the garage listing like a torpedoed frigate. Nothing left to it but to give a pep talk to my fiancé and get it in the garage. For those that haven't moved a machine this heavy before, I cannot impress upon you how heavy it is. It is beyond heavy. My unisaw and old Dj-20 feel like plastic toys next to this thing. All I can say is atleast the damn this is in the garage and I can sleep on it. I might end up taking the motor and beds off tomorrow. I don't really want to do that, but I might have to do it. I'm wondering if the one dolly can support the weight of the machine now that I took the fence off and all. It might be worth a shot. I'm returning that damn furniture dolly. Sucker was $40ish bucks and lasted all of five minutes. 

Phase II was a resounding failure. Well, not resounding, but the wheel breaking was a blow to the plan. At one point I had the jointer half way in the garage and halfway out of the garage listing like a torpedoed frigate. Nothing left to it but to give a pep talk to my fiancé and get it in the garage. For those that haven't moved a machine this heavy before, I cannot impress upon you how heavy it is. It is beyond heavy. My unisaw and old Dj-20 feel like plastic toys next to this thing. All I can say is atleast the damn this is in the garage and I can sleep on it. I might end up taking the motor and beds off tomorrow. I don't really want to do that, but I might have to do it. I'm wondering if the one dolly can support the weight of the machine now that I took the fence off and all. It might be worth a shot. I'm returning that damn furniture dolly. Sucker was $40ish bucks and lasted all of five minutes. 

sounds like you need a few friends, a case of beer, and some large pizzas

This is UNACCEPTABLE. 

You do not do labor in To Boot NY shoes. I am calling your local sacks and nordstroms and filing a complaint on you. You should feel ashamed.

btw, get er done...that things beast.

  • Author

This is UNACCEPTABLE. 

You do not do labor in To Boot NY shoes. I am calling your local sacks and nordstroms and filing a complaint on you. You should feel ashamed.

btw, get er done...that things beast.

Trust me, wouldnt have been my first choice, brother. I felt like I was iceskating up my driveway.

IMG_1248.JPG

I often times have to go straight from work to football practice.  Walking on grass is just as bad.  Having taps on has been my saving grace a few times. 

However tempting, I'll bypass excursion into footwear (I'm an Allen Edmonds guy)... :)

I've got no experience with Grizzly, so YMMV...

Looking at the photo of your jointer and your desire to lighten it, I'd suggest removing the tables and see if that does it, prior to tackling the motor...

On jointers I've disassembled, the tables are removed with four bolts per table (my jointers have all been pillar mount). You need a helper because they are heavy and have to be lifted dead-vertical up off the mounting pillars... It's not so much the removal, but the aid in positioning upon reinstall.... But again, that's Euro-style jointers, I don't know Grizzly...

  • Author

Called the old guys(uncle and dad) over yesterday afternoon. I created a makeshift ramp out of some scrap pieces of wood and the back panel of the jointer--yes, i am the modern day MacGyver. I suppose watching reruns of that show when i was 7 paid off. We spent 3-5 minutes redistributing the jointer on the furniture dollies, and then rammed it home up the ramp. 5 minutes later, it was in its rest place.

The machine moved easily on the dollies, but expecting the wheels to handle anything other than 1/8" is clearly asking too much. That is my one note for furniture machine movers. Actually, two notes; use thin lipped ramps for any bump. If you need to use two dollies like me, it would be best to join them somehow. I should have taken my scrap 2x6s and screwed them into the dollies to create one cohesive wheeled unit. 

I took all the shrink wrap off and began cleaning the whole unit. A few spots of rust and a ton of grime/old cosmoline. Tables cleaned up pretty well. They should be better with a couple coats of wax. I have a few spots of deep rust/pitting. It hasnt formed a crater yet, but they are areas of deep rust. Not sure if i am explaining that properly. At any rate, the tables are flat and straight according to my starrett 24" rule and long lee valley straight edge. Not having perfection is something you need to come to terms with when buying used machinery. My unisaw CI wing has a deep gouge in it. It sucks and it doesnt affect the performance of the saw whatsoever. The same will hold true for my few spots on the outfeed bed. I wired up a new outlet for the machine, and put a plug on the end of the cord. Bingo, fired right up! I dont know why, but i am always intimidated as hell the first time i start up a new machine in my shop. I am programmed to think the whole thing is going to blow up on me. I am strange. The control box on this machine is kinda cool. You can lock out the power of the machine by twisting the emergency stop button. I also like that the controls are mounted up and out of the way. That made me nervous on my DJ-20 that the switch was right by my knees. It feels a lot lower than my delta too. Not necessarily a bad thing. Overall, I think it was a good buy and add to the shop. I have a dozen walnut boards that are 11-12" that i purposefully havent used yet. Time to calibrate today and wax the beds.

 

Total cost- $1900.

Purchased from a school for $1600, shipping to my door with lift gate was $300. I sold my delta for $950, so I am out close to a grand for the upgrade. The DJ-20 was a good machine for the 6 months I owned it, but it was from a cabinet shop and i never felt 100% confident that the machine was going to be pain free forever. Some of the jack screws for setting the knives were stripped, and it had been in a pro shop for 15 years. Add in it was 8" with me dealing with 8+ wood 30%+ of the time and it was a marked man from the start. Considering this is from a school that closed down shop a few years ago, and its from 2005, I would say it shouldnt have a ton of hours on it. Still, a helical head retrofit might be in its future the next year, and that will take care of all the bearing maintenance that it may or may not need. My first grizzly tool that isnt a blower on top of a cone. I am interested to see how it performs.

IMG_1257.JPG

IMG_1258.JPG

IMG_1261.JPG

bummer, hit the photo limit :(

  • Author

Oh nice, I was able to upload the others. Here it is all cleaned up. I am missing a set screw that holds the spring column in place for the guard, so that is the one part i need to order. The screw will most likley be a buck and shipping will be $7, what are ya gonna do. 

 

Im sure triple h will answer this, so I should just direct the question to him, but what are the benefits of the segmented versus non-segmented chipbreaker? I only see them on 12"+ machines. 

IMG_1262.JPG

IMG_1263.JPG

IMG_1267.JPG

Cleaned up nicely.  Hopefully gives you years of trouble free work.  Hoping to read the review after you used it for a couple of months. ;)

What a beast. How long are the beds? Hope this thing works like a charm after the struggle you had getting it in! Enjoy!! Sent from my SM-P550 using Tapatalk

  • Author

What a beast. How long are the beds? Hope this thing works like a charm after the struggle you had getting it in! Enjoy!! Sent from my SM-P550 using Tapatalk

only 80-81". I kind of wish the thing was 8' long. I feel like they skimped a little on the length, but then again the longest jointers ive seen topped out around 101". The 16-20" euro jointers are about that length. 

That's an excellent price.  How did you find out about the jointer?  Was it an online auction?

Nope, just a listing online that the shop teacher created. I think he was in charge of selling all the old equipment. I negotiated a little bit, and we settled on the price pretty quickly.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.