Andy Wright Posted September 10, 2015 Report Posted September 10, 2015 I know this probably isn't everyone's cup of tea, but I just finished building this end table using a recycled metal barrel. The barrel is dated 10-23-1946 on the bottom and was originally used to deliver calcium carbide. The table top is reclaimed oak from the floor of a semi trailer (same material I used for the coffee table I posted last week). For this table I glued up three pieces for the top and I plugged the bolt holes in the wood (for the coffee table I left the holes as I found them). The base is made from reclaimed oak barnwood Quote
Brendon_t Posted September 10, 2015 Report Posted September 10, 2015 That thing is pretty cool. Very industrial looking. For the base, did you set the X then rebate it for the barrel? Quote
Andy Wright Posted September 10, 2015 Author Report Posted September 10, 2015 That thing is pretty cool. Very industrial looking. For the base, did you set the X then rebate it for the barrel?The base is attached to the top with a 3/8" threaded rod that sandwiches the barrel in the middle. The top has a round piece of plywood cut to fit into the existing opening of the top of the barrel which keeps the top centered over the barrel. 1 Quote
mat60 Posted September 10, 2015 Report Posted September 10, 2015 Well....I like the idea of making something out of what you have...That could be used for lots of things.. Quote
davewyo Posted September 10, 2015 Report Posted September 10, 2015 Yeah, great job of re purposing. Quote
Chet Posted September 10, 2015 Report Posted September 10, 2015 Andy, you are a recycler of the artistic nature. Nice work and you don't have to worry about it getting dinged or dented. Quote
wtnhighlander Posted September 10, 2015 Report Posted September 10, 2015 Very cool industriak look, Andy. Nice use of materials, too. Some folks think anything old enough to rust is "antique", but that barrel has some real history behind it. Quote
..Kev Posted September 11, 2015 Report Posted September 11, 2015 Good hiding place too Nice job! Quote
davewyo Posted September 11, 2015 Report Posted September 11, 2015 Good hiding place too Nice job!What'cha hiding Kev? Seems like a person could hide a lot of it in there...whatever it is... Quote
..Kev Posted September 11, 2015 Report Posted September 11, 2015 What'cha hiding Kev? Seems like a person could hide a lot of it in there...whatever it is...If I told ya, I wouldn't hide it there Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.