Janello Posted September 29, 2015 Report Posted September 29, 2015 I know a lot of you own Supermax sanders and like them, but I am leaning more towards a Jet ODS. Has anyone used one of these and care to share your experience? Quote
Brendon_t Posted September 29, 2015 Report Posted September 29, 2015 Don't buy a ridgid sander. Quote
Janello Posted September 29, 2015 Author Report Posted September 29, 2015 (edited) Ridgid makes a drum sander? Well that wasn't a thought anyhow. I am leaning toward the Jet Oscillating machine because, well, it oscillates. Edited September 29, 2015 by Janello Quote
Coop Posted September 29, 2015 Report Posted September 29, 2015 I haven't shared this with anyone for fear of being ostracized, but I bought one last Dec. and Really like it. I saved the $500 and didn't buy a Festool either. There, I said it! Out of the closet! There is talk about the paper being hard to change, but unless you're a 400 lb. bear with claws, it's pretty simple after the first couple of changes. Wait for Jets quarterly 10-15% off sale. Don't buy a ridgid sander. Brendon, did you ever get that part you were looking for? Quote
Brendon_t Posted September 29, 2015 Report Posted September 29, 2015 (edited) Yeah coop, i actually got a twof just in case the gear strips out again. It ended up taking about 3 months. Is the ods the 22-44 model? Edited September 29, 2015 by Brendon_t Quote
Coop Posted September 29, 2015 Report Posted September 29, 2015 Oh crap, ODS, oscillating drum sander, I blew it! Quote
Brendon_t Posted September 29, 2015 Report Posted September 29, 2015 I've heard that the ods is good for heavy stock removal but leaves ripples in oscillator mode Quote
Pete Staehling Posted September 29, 2015 Report Posted September 29, 2015 I've heard that the ods is good for heavy stock removal but leaves ripples in oscillator modeI wonder how important the oscillator mode is. I notice that on my spindle sander the oscillating seems to speed removal and if anything make for a smoother finished surface. On the other hand I never looked at my little Jet 10-20 and wished that it oscillated.It looks like they are 15% off now so it might be a good time to buy. http://www.cpojettools.com/jet-659006k-22-44-oscillating-drum-sander-kit-with-closed-stand/jetn659006k,default,pd.htmlIf you get one, let us know how it works out. Quote
mkrusen Posted September 29, 2015 Report Posted September 29, 2015 I have the 22-44 ODS and have no complaints. I've never used a Supermax so can't give you a direct comparison. As stated above, the paper change is really not that bad. Changing paper is always annoying on any machine but it only takes a few minutes. If you can't figure it out, then you have bigger issues haha. As far as the oscillation goes, I typically use it for stock removal or rougher surfaces. If you take too heavy of a pass then yes it will leave ripples. You definitely have to find that happy medium. For my final few passes I typically will turn off the oscillation but sometimes I forget and its not a big deal. I don't use the drum sander as a final sanding anyway. I usually take the panel/board over to the ROS for a final 220 sanding after the drum sander. Hope that helps! Quote
Janello Posted September 29, 2015 Author Report Posted September 29, 2015 (edited) Interesting mk, I had figured the advantage of oscillation would make it ideal for final passes, as not to leave behind scratch marks. It was the whole reason I was leaning that way and willing to pay more for that particular drum sander. Edited September 29, 2015 by Janello Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.