Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

My Wife Gave Me Wood..

Featured Replies

For our anniversary :-)  Still sounds kinda dirty, but really...  She got me a chunk of ebony.  She didn't know what kind but I'm guessing either Mun or Brazilian?  This thing is heavy!  it's 6" x 6" x 3" and has to weigh at least 5 pounds! Very hard and coated with wax.  I can veneer it out, but then what?

Any suggestions what to do with a small chunk like this?

 

IMG_1858.thumb.JPG.fe8737f992949a090e5a5

 

 

IMG_1859.thumb.JPG.c71afb44e9ef47e51cae9

 

 

IMG_1860.thumb.JPG.642ab9d211fae77ad72d9

 

 

 

I've seen both gaboon and macassar ebony with colors and grain like that, though most of the macassar I've seen has a more distinct striation.  So basically, no idea.  I'd guess gaboon just because it's the most commonly available.

Be careful with it...I bought a big waxed chunk like that several years ago.  I had no idea how green it was but I needed a little bit for some tiny accents on a project, so I scraped the wax off of the long grain and left the wax on the end grain.  Cut a small piece off that I needed and put the rest on the shelf.  The block split in several places within a couple days.  Fortunately I only use it for tiny little accent parts so it's still mostly usable, but it was a kick in the nuts considering I spent more than $80 for it.  Slicing it into veneers is surely a recipe for disaster...gotta imagine they'll split terribly.  Ideally you'd let it sit in your shop for ten years and allow it to dry slowly. :D I hate waxed blanks.

Same thing happened to me with a chunk of gaboon.  Cut a bit off. Didn't re wax it.  Split to all hell.

Could be the source of plenty of square pegs and accents for Greene and Greene projects .

I would love to know how to dry a block like that with minimum cracking etc. There has to be some method besides years of waiting. Low level vacuum ?

Could be the source of plenty of square pegs and accents for Greene and Greene projects .

I would love to know how to dry a block like that with minimum cracking etc. There has to be some method besides years of waiting. Low level vacuum ?

That's an interesting idea.  It would have to be a pretty good vacuum to do it.  You need 22.12 in/hg to get it to boil at room temp/  Just getting it to boil does not cause it to dry.  If you did that in a pressure/vacuum vessel you would still need to vent it to get the water out.  Pull a vacuum, let it sit some days, vent and stabilize.  A few times like that maybe.  

So the stunt is pulling the moisture through the incredibly dense sides. You wax the snot out of the ends to promote even drying. What if you the packed it in a hydrophilic agent like diaper dust? This is a known gardening hack for water regulating pots. Just noodling and not thoroughly convinced. 

  • Author

I haven't scraped  and put the moisture meter to it yet, but guessing by the weight it likely still wet..  Will update in the morning :-). Wet or not, gotta love the wood ;-). #Anniversary..  Sorry, couldn't resist :-). 17 yrs...

Edited by AMiller Woodworking

Looks like macassar to me. Reminds me of some of the guitar bridge blanks I have. You could turn it on a lathe into a very expensive bowl, that will surely dull all of your turning tools.

  • Author

Just checked the MC% and it seems to be pretty even on all sides; 8%-9%.  Think I'm still going to use it as a paperweight for a couple months to see what happens.  @Steve, I do have small G&G project I've wanted to do for a long time, might have to use this as the guinea pig :-)

Yeah 8-9% on the surface doesn't mean jack...get a reading from the center of it and I bet my favorite ball of string it's higher than that.

This is why moisture meters are not nearly as useful in certain cases as they might be in others...unless you lop this thing in half there's no way to get an accurate reading.

  • Author

Yea, my meter is able to scan 1" into the material.  Doing this both sides I'm still left with 1" in the middle that could be Pandora's box..  

==>I'm guessing either Mun or Brazilian?

I'll vote Macassar Ebony...

Why?

I just finished a project using a block that looked almost exactly like yours, but a bit longer...

 

T-1-2.thumb.jpg.72f02728f5fdc886ac4a501b

 

Started with a block and decided to slice some veneer... It's pretty hard, but worked OK... Looks good with a bit of oil and lacquer.. I'll probably use the rest of the block for drawer pulls...

Edited by hhh

Wet or not, gotta love the wood ;-). #Anniversary..  Sorry, couldn't resist :-). 17 yrs...

Had it been your 5th, chances are better that she might could have helped make it bigger. Sorry, I couldn't resist either. Happy anniversary

  • Author

Yeah 8-9% on the surface doesn't mean jack...get a reading from the center of it and I bet my favorite ball of string it's higher than that.

This is why moisture meters are not nearly as useful in certain cases as they might be in others...unless you lop this thing in half there's no way to get an accurate reading.

<Like>:  Evidently I've met my "like" quota for the day....  ;-)

 

This is why moisture meters are not nearly as useful in certain cases as they might be in others...unless you lop this thing in half there's no way to get an accurate reading.

I drill two very small holes in the wood to the center, the width of the pins on my meter and insert brad nails, touch the meter pins to the nails, and it should give you a reading in the middle.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.