Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

4" PVC Ducts

Featured Replies

Since I have anew dust collector on the way I have a quick question. Do most 4" dust collection fittings work on 4" PVC? I'm used to dealing with Shop Vac hoses and none of the fittings ever seem to fit.

I used the black sewer and waste pipe.  The fittings that you get from Woodcraft or else were fit inside the pipe.  So I did all my runs with the 4 inch pipe and the fittings from the hardware store. I didn't use 90's, I used two 45's with a small piece of pipe in between to give it a bigger sweep instead of the tight turns the 90 would give you.  I didn't glue anything just the friction fit and a couple of screws.  I did it this way because I wasn't sure any of the tools were in their final resting place and this would make it easier to move the ducts then if it was all glued up.  Then when I got to the end of a run were my drop down was and I was going to attach the machine with flexible hose I used the fitting from the woodworking supply, slide it inside the 4" pipe and taped it with Aluminum duct tape.

They fit pretty good on schedule 10.  The green, thin walled, cheap stuff. 

does anybody electrically ground their pvc. i have heard concerns of static build up

I dont.  I really dont think it is much of an issue unless you are an industrial sized shop.  Im sure someone will say otherwise.

I've had the crap shocked out of me by the hose coming from the drum sander.  But still no. 

I've had the crap shocked out of me by the hose coming from the drum sander.  But still no. 

I wonder if this was due to the fact that the dust out of the drum sander is finer and there for more surface being contacted by the dust causing a greater chance of static build up.  I haven't used my drum sander enough to experience this.

My DC system isn't grounded either.

 

I think the static problem is largely related to the relative humidity. In our area (Calgary) it's pretty dry, especially in the winter. I've gotten zapped from just a shop vac hose. I don't see it as a hazard though, just an annoyance. I decided on steel ducting. 

  • Author

Thanks for the info guys. I don't have a very large system but don't want to order a bunch of stuff and have it not fit together. Thanks again.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.