Recommended Posts

Posted

All your kind words encouraged me to add another one. This was the original planned version for the living room, but as you will see from the plan vs end result, I managed to omit the last outside pieces to get it to the final size. Temporary mind blank. So the wife decided it would go to the bedroom.

The plan (must start using sketchup, but I like doodling)

PCTB01.jpg

I didn't take a lot of pictures of this one while building. All joints are glued and where the sides and top meet mitred at 45 deg. 

PCTB02.jpg

  • Like 1
Posted

The top. I used the same board to continue the corner so you'd see the difference pop.

PCTB03.jpg

 

Struggling with the 1.95 MB upload limit. 

Merged the top and bases, apologies for the lack of in between pictures. Used glue and many clamps, and built a plywood support to keep the top from slipping sideways. As my lack of a jointer and skills to get a tight fit, there were some not-so-tight fitting joints. Inspired by the yachts I saw during the Abu Dhabi Formula 1, and a way to hide the imperfections, I routed grooves between the boards and filled it with epoxy, as well as the knots.

PCTB04.jpg

Posted

More wipe-on poly, and in placed in the bedroom. Both top and bottom was rounded over, it gave it a softer look.

PCTB05.jpg

PCTB06.jpg

Accessorized by the wife! Thanks for looking.

PCTB07.jpg

PCTB09.jpg

9 minutes ago, K Cooper said:

Really cool pattern but are you concerned about expansion? What kind of joinery are you using for the top?

Just glue, Titebond III. And lots of epoxy. To be honest, I haven't given expansion much thought as the pieces are quite short and I'm hoping the forces will equal out. Time will tell. It's been in place for 4 weeks now and I've not noticed any creep yet. But you have me worried! 

  • Like 1
Posted

My first thought was,awesome, second was ut ooh.. 

If that whole top is solid, I fear for it once monsoon season arrives and it goes 10 to 90% humidity overnight. 

 

But like coop said, enjoy it.

Posted

It's kind of a mindmelt trying to visualize what movement that table will undergo and what the ramifications may be...but if I'm looking at it correctly, I think you may not have serious issues there.  It looks like everything should generally move in unison.  The top is all mitered so it's not exactly a cross-grain situation.  But time will tell.  Hope it stays together...pretty cool looking.

Did you build that in one day? :huh:

Posted

Flatsawn Walnut: moves more than Cherry, but less than Maple... So depending on the humidity swing and width of miters, the top's a bit of a crapshoot... If anything, the skirt's going to go first...

If it's in a humidity-controlled space (some HVAC systems manage temp and humidity separately), it may hang together...

But it is pretty cool...

Posted

I'm glad to see something unique on this forum. It is an awesome looking piece, and you may end up being alright on it. In the event something does explode, you will learn from it. It's nice to see someone actually publishing projects on here. Congrats on a nice looking piece! 

Posted

Thanks everybody, much appreciated!

23 hours ago, Brendon_t said:

I fear for it once monsoon season arrives and it goes 10 to 90% humidity overnight. 

Monsoon? Here in Abu Dhabi we look forward to our annual drizzle once a year :) Humidity does get very high, it swings during the year between 40-99% but it generally changes quite slowly.

15 hours ago, Eric. said:

It's kind of a mindmelt trying to visualize what movement that table will undergo and what the ramifications may be...but if I'm looking at it correctly, I think you may not have serious issues there.  It looks like everything should generally move in unison.  The top is all mitered so it's not exactly a cross-grain situation.  But time will tell.  Hope it stays together...pretty cool looking.

Did you build that in one day? :huh:

I'm hoping the expansion if any will be pretty equally spread, wishful thinking probably. It took me about 3 weeks, couple of hours after work and most weekends. I have a regular job which really gets in the way of wood working dammit.

Thanks again for the compliments, all. If it does explode, I'll post an update, including surprised "What was that, I need to go an change my underwear" selfie pic. 

Posted
6 minutes ago, Bart said:

Thanks everybody, much appreciated!

Monsoon? Here in Abu Dhabi we look forward to our annual drizzle once a year :) Humidity does get very high, it swings during the year between 40-99% but it generally changes quite slowly.

 

No monsoon season?  What a rip off. Over across the gulf in Kuwait and Iraq, they get some gooduns.

Posted
3 minutes ago, Brendon_t said:

No monsoon season?  What a rip off. Over across the sea in Kuwait and Iraq, they get some gooduns.

True dat. That all blows in from the direction of India and Iran. The Persian gulf acts like a buffer apparently. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   0 Members, 0 Anonymous, 56 Guests (See full list)

    • There are no registered users currently online
  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined