Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Poll: What new power tool are you needing for someone to invent?

Featured Replies

I'm hoping someone will come up with a stepper motor and digital keypad (not necessarily full CNC) to add to an Incra Ultra (or similar solution).  Clamp board, move in, move out, move over, repeat.  Might be nice to Bluetooth to my phone-as-controller.  (Of course it probably already exists and I just don't know about it.)

  • Replies 72
  • Views 11.4k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Just because you don't like the answers does not make them not serious. I seriously want most of the things that have been mentioned here. Except a clone of Eric. One of those walking around is enough

  • wtnhighlander
    wtnhighlander

    ... a shop with Dr. Pepper on tap, and a urinal. Non-adjacent.

  • I suppose if the title reflected more of a, "Ideas for DIY CNC" sort of thing... Also, it was Wednesday... Sawdust Withdrawal is just setting-in... WTO members can almost taste their next 'fix' -

6 minutes ago, collinb said:

I'm hoping someone will come up with a stepper motor and digital keypad (not necessarily full CNC) to add to an Incra Ultra (or similar solution).  Clamp board, move in, move out, move over, repeat.  Might be nice to Bluetooth to my phone-as-controller.  (Of course it probably already exists and I just don't know about it.)

I'd like a fully automated robot so I can just lay on the couch while it does my woodworking for me.  That way I'll never have to woodwork again.  Wait...never mind.  I'm fine like this for now.

  • Author
2 minutes ago, Cochese said:

Automatic miller.

You mean: Set the desired thickness and pass the wood through until done?

Your question wasn't very specific... Does this have to be related to woodworking? 

12 minutes ago, collinb said:

I'm hoping someone will come up with a stepper motor and digital keypad (not necessarily full CNC) to add to an Incra Ultra (or similar solution).  Clamp board, move in, move out, move over, repeat.  Might be nice to Bluetooth to my phone-as-controller.  (Of course it probably already exists and I just don't know about it.)

There is something like that for router tables that controls the lift as well as the fence.  It goes by the name Ready to Rout.

 

http://shop.nextwaveautomation.com/shop/category.aspx/ready2rout-ready2lift/7/

  • Author
Just now, Eric. said:

I'd like a fully automated robot so I can just lay on the couch while it does my woodworking for me.  That way I'll never have to woodwork again.  Wait...never mind.  I'm fine like this for now.

We don't use corded drills because cordless is too modern.  We don't use a hand drill because we really think it's truest to the craft to avoid power drills.  Tools are tools. Some are just more sophisticated than others.  But I get your point -- if we're not touching the wood are we really doing woodworking? (At least that's what I'm picking up.)

Just now, collinb said:

But I get your point -- if we're not touching the wood are we really doing woodworking? (At least that's what I'm picking up.)

Exactly.  There's a line somewhere that separates tools of convenience and tools of automation.  It's different for everyone but I know where mine is.  If I get any more automated it starts taking the fun out.

  • Author
Just now, Eric. said:

Exactly.  There's a line somewhere that separates tools of convenience and tools of automation.  It's different for everyone but I know where mine is.  If I get any more automated it starts taking the fun out.

I see photography the same.  That's why I do b&w film.  Digital is not photography per se but rather imaging. It is its own craft, just as oil painting creates a different image than film, digital has its own system and only borrows the lenses.

Personally, I don't mind automation as long as I get to do the design and get to control the machine.

11 minutes ago, collinb said:

You mean: Set the desired thickness and pass the wood through until done?

Something I can set a stack of wood on, and at the end of the operation my wood is S4S to my desired thickness and stickered for when I have the time to do something with it.

Robotic fence for table saw/ bandsaw / router. You dial the size, fence moves automatically. Also checks that the fence is parallel to the blade within 0.000005 microns :o

Added bonus: fence position can be set automatically from another piece, to the same width.

  • Author
10 minutes ago, Immortan D said:

Robotic fence for table saw/ bandsaw / router. You dial the size, fence moves automatically. Also checks that the fence is parallel to the blade within 0.000005 microns :o

Added bonus: fence position can be set automatically from another piece, to the same width.

You're taking my idea too far.  But ... quoting Charlie Brown "Don't you know sarcasm when you hear it?"

 

13 minutes ago, Cochese said:

Something I can set a stack of wood on, and at the end of the operation my wood is S4S to my desired thickness and stickered for when I have the time to do something with it.

I call that "Home Depot"

How about a tool that sharpens your blades at night while you sleep?

A table saw that sharpens the blade as it cuts?

A thing that cleans the shop while I am asleep?

 

1 minute ago, collinb said:

You're taking my idea too far.  But ... quoting Charlie Brown "Don't you know sarcasm when you hear it?"

 

Seriously, imagine making box joints with a fence like that. It could behave exactly like an Incra jig, but you only have to press a button to move and lock the fence to the next position. Things like making dadoes without a dado blade would be easy too, you just set the fence to "kerf mode" and press next :D

  • Author
Just now, Immortan D said:

Seriously, imagine making box joints with a fence like that. It could behave exactly like an Incra jig, but you only have to press a button to move and lock the fence to the next position. Things like making dadoes without a dado blade would be easy too, you just set the fence to "kerf mode" and press next :D

My op idea would have the same net. Just missing the precision criteria.

3 minutes ago, Immortan D said:

Seriously, imagine making box joints with a fence like that. It could behave exactly like an Incra jig, but you only have to press a button to move and lock the fence to the next position. Things like making dadoes without a dado blade would be easy too, you just set the fence to "kerf mode" and press next :D

Rockler has a router table fence that auto adjusts... 

18 minutes ago, Immortan D said:

That's pretty much it, but I don't think it will work on the table saw.

It would just need a longer lead screw.  But there is no reason it couldn't,  It would be rather like the Incra table saw fences.

 

It is totally doable, might be significatly more expensive though.  I wonder about adding in control of the depth and angle of the blade as well.  CNC table saw.

6 minutes ago, ponderingturtle said:

It would just need a longer lead screw.  But there is no reason it couldn't,  It would be rather like the Incra table saw fences.

 

It is totally doable, might be significatly more expensive though.  I wonder about adding in control of the depth and angle of the blade as well.  CNC table saw.

But unlike CNC it won't take the fun out of it. You still have to make the cut and suffer the kickbacks lol. It just makes adjustments easier and more precise.

3 minutes ago, Immortan D said:

But unlike CNC it won't take the fun out of it. You still have to make the cut and suffer the kickbacks lol. It just makes adjustments easier and more precise.

It is still CNC, as that is computer numeric control, it is just a CNC table saw instead of a milling machine.  It would also not have the bed limits and such.

2 minutes ago, ponderingturtle said:

It is still CNC, as that is computer numeric control, it is just a CNC table saw instead of a milling machine.  It would also not have the bed limits and such.

Yep, in a strict sense it is. But only applies to setup, not execution.

==>What new power tool are you needing for someone to invent?

A robot to empty the shop’s DC bin, collect all sawdust around the barrel, insert a new bag, select a suitable spot in the garden for disposal based on the color of the sawdust. It should be available from the various BORG suppliers for $199 and Harbor Freight for $19.95 – the HF version will be made from papier-mache and last exactly one day past the warranty.... Of course, there will be a version painted green, but it will sell for $875 -- and have great customer service... :)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.