Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Looking for lumber in all the wrong places... (around North MS)

Featured Replies

Hi all,

I've had a tough time finding the hardwood I wanted for the Roubo build. I just couldn't shell out $800 for wood cut at the wrong dimensions at a place far away that would require me to rend a uhaul on top of the cost of the wood... Ugh. So, I found a guy who sold me lots of beautiful red oak for $2 / bf. It's fresh, though. So now I have to wait or to find (or build) a kiln. Ugh again. Living in North Mississippi is rough for this would-be woodworker. 

Any advice on buy, drying, kilning, finding a kiln-dryer person, etc.? The most feasible solution I've found is this one: http://www.instructables.com/id/Kiln-Dry-Lumber-At-Home/. I don't want to ruin hundreds of dollars of hardwood. I also don't want to wait two years for it to dry... Help!

Eric

It won't let me post a pic for some reason (says I'm limited to 2mg, but my pic is 113k...), so here's a link to a pic: https://www.dropbox.com/s/ky7jw3oeae8d8ac/RedOakAndWaterOakOnTopSml.jpg?dl=0

You could order the kit from Bell Forest?

Kev got it. Bell Forrest has a lumber package specifically pulled for the Roubo bench.  

I don't know how it's possible you are in Mississippi and can't find wood.. There are massive hardwood swamps and live fall happening all over that place as towns encroach into farming land. 

10 minutes ago, Mike. said:

The Roubo kit is ~$800 + shipping from Bell Forrest.  I think OP didn't want to spend that kind of money.  Seems like he is looking for a way to kiln dry some oak he got cheap.  OP - did you already buy the oak?  

With respect, I'm not sure that's where he was coming from.. 

The Roubo kit it picked specifically for the project so, should yield what he needs for it.  If not, they're really good about making it right.

Brendon, I'm about 1.5 hours North of Eric T., and feel his pain. There are about as many sawmills around here as there are churches, but its painfully hard to find one that sells anything less than a container load. Most of them ship green lumber directly to Armstrong (here in town), or some other flooring factory. I have yet to find a single hardwood dealer less than two hours drive from me in any direction. I've been getting by with CL deals from hobby sawyers, or folks cleaning out Grandpa's old barn.

6 hours ago, Eric Thomas Weber said:

Hi all,

I've had a tough time finding the hardwood I wanted for the Roubo build. I just couldn't shell out $800 for wood cut at the wrong dimensions at a place far away that would require me to rend a uhaul on top of the cost of the wood... Ugh. So, I found a guy who sold me lots of beautiful red oak for $2 / bf. It's fresh, though. So now I have to wait or to find (or build) a kiln. Ugh again. Living in North Mississippi is rough for this would-be woodworker. 

Any advice on buy, drying, kilning, finding a kiln-dryer person, etc.? The most feasible solution I've found is this one: http://www.instructables.com/id/Kiln-Dry-Lumber-At-Home/. I don't want to ruin hundreds of dollars of hardwood. I also don't want to wait two years for it to dry... Help!

Eric

It won't let me post a pic for some reason (says I'm limited to 2mg, but my pic is 113k...), so here's a link to a pic: https://www.dropbox.com/s/ky7jw3oeae8d8ac/RedOakAndWaterOakOnTopSml.jpg?dl=0

if you are interested in options for drying the lumber, check Matt Cremona's website http://www.mattcremona.com/making-lumber/air-drying-your-own-lumber . I don't have much experience but I know there are some tricks to speed up the drying process.

Another option if you are cash constrained is to build a bench out of construction lumber. I love the beautiful benches people show on the forum with contrasting hardwoods and Benchcrafted vises, but I've never spent the time or the money to build one for my shop. I have a workbench built out of 2x10s from Home Depot, and as far as workbenches go it works fine. It is heavy, holds vises and benchdogs, and has stayed flat for 15 years (plus I don't have to stress about leaving a ring in the finish if I leave my beer on the bench).

Here are a couple of youtube videos showing humble roubos built out of inexpensive lumber.

 

 

39 minutes ago, Mike. said:

FWIW I have been seriously woodworking for about 4 years now, have built a dozen or so furniture projects and I don't have a proper bench.  Just a sturdy assembly table, some bench hooks and clamps.  

 

+1

It makes me really appreciate the roubo builds a lot more. Also it really seems that lumber is only half the financial battle for a bench build.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.