Brendon_t Posted March 4, 2016 Report Posted March 4, 2016 One of my first "hand tool" purchases was a shop fox wheel type marking gauge. It's done is job but it's time to move on rather than replace the dull dinged up wheel. Something with a better adjustment than a knob on a steel rod. Any recommendation? Quote
wdwerker Posted March 4, 2016 Report Posted March 4, 2016 I can see the desire for something better. Irregardless I would flip the wheel over and then Chuck the rod in the drill press and go after it with whatever sharpening abrasives you deem suitable. Then you have a backup and don't have to pay for overpriced fast shipping on the new one. The better designs I have seen just have a pressure bar the screw tightens against or a small flat the length of the rod. Have fun shopping ! Quote
Brendon_t Posted March 4, 2016 Author Report Posted March 4, 2016 I won't be throwing this one out. Proabably keep it for when I need two gages set like with marking out mortises and half blind dovetails. Quote
Tony Wilkins Posted March 4, 2016 Report Posted March 4, 2016 For me I'd say Titemark for wheel and Hamilton for a more traditional style. Quote
RichardA Posted March 4, 2016 Report Posted March 4, 2016 Damn, why buy, when making one is so simple? If you want a wheel on one, sharpen a washer, if you want one with a point, buy a non chineese nail and sharpen it....Yeah, it's only money, but improving your skills is a much better investment! Quote
TerryMcK Posted March 4, 2016 Report Posted March 4, 2016 I like the Veritas gauge. Easy to adjust and it has a scale on it. 1 Quote
shaneymack Posted March 4, 2016 Report Posted March 4, 2016 Brendon I have the veritas graduated micro adjust wheel gauge. It is great and not too expensive. http://www.leevalley.com/en/wood/page.aspx?p=59455&cat=1,42936,59455 Sent from my SM-N910W8 using Tapatalk Quote
Dknapp34 Posted March 6, 2016 Report Posted March 6, 2016 I have the Veritas dual marking gauge and have no complaints. The dual is especially useful for marking mortises. Sent from my iPad using Tapatalk Quote
Brendon_t Posted March 7, 2016 Author Report Posted March 7, 2016 On 3/4/2016 at 3:56 AM, shaneymack said: Brendon I have the veritas graduated micro adjust wheel gauge. It is great and not too expensive. http://www.leevalley.com/en/wood/page.aspx?p=59455&cat=1,42936,59455 Sent from my SM-N910W8 using Tapatalk That was one on the short list to look into. Do you find the micro adjust to be clunky? Quote
shaneymack Posted March 7, 2016 Report Posted March 7, 2016 Brendon I have the veritas graduated micro adjust wheel gauge. It is great and not too expensive. http://www.leevalley.com/en/wood/page.aspx?p=59455&cat=1,42936,59455 Sent from my SM-N910W8 using Tapatalk That was one on the short list to look into. Do you find the micro adjust to be clunky? Not at all Sent from my SM-N910W8 using Tapatalk Quote
BobInAustin Posted March 8, 2016 Report Posted March 8, 2016 http://floriptoolworks.com/layout-tools Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.