Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

OF 1400 Guide Rods

Featured Replies

Has anyone found a good source for longer guide rods or is everyone just making their own?

I have 2 guide fences and want to run them on each side of the router.

I made my own for my Makita router from 1/2" threaded rods. They don't need to be super heavy duty, not many forces involved.

If it's just a round rod try measuring the diameter in MM. Look at McMaster Carr for metric steel rods, then shafts, which are hardened and precision ground .

  • Author

Yea, just round rods..  I can measure and find, just hoping someone had a good source..

The key words are hardened and precision ground. Most steel rods are soft and can vary in size. They are usually not cheap but might be less than Festool prices.

I've purchased some steel rod from amazon and it appeared to be good stock. There are amazon haters and lovers out there i don't know where you fall but that site has a ton of stuff.

  • Author
7 minutes ago, Chestnut said:

I've purchased some steel rod from amazon and it appeared to be good stock. There are amazon haters and lovers out there i don't know where you fall but that site has a ton of stuff.

I use them when I need them, I am a prime member.  

  • Author
1 minute ago, K Cooper said:

Kev, What size rods do you need?

I haven't actually measured them yet so, don't have that answer Coop..  Don't even have a current project where I need to use both guides..

 

I just remembered having some 3/8" x 10' stainless rods that I would be glad to cut to length and give ya but it's probably too small diameter?

  • Author
Just now, K Cooper said:

I just remembered having some 3/8" x 10' stainless rods that I would be glad to cut to length and give ya but it's probably too small diameter?

I'm sure I can source them locally cheaper that it would cost to ship Coop but, appreciate the offer.  

Just kind of checking to see what others were doing and where they get their rods.  

Kev, with longer rods,  how would you even use it? Does the ft "head" move down the rods rather than the rod move through the router base? 

  • Author
5 minutes ago, Brendon_t said:

Kev, with longer rods,  how would you even use it? Does the ft "head" move down the rods rather than the rod move through the router base? 

Yes.  The 2 guides are locked in place and then the router slides (and locks) on those rods so, essentially you create an adjustable jig using to guides.

I can go set it up for a pic if that doesn't make sense?

No I can visualize it.  I was mentally blocked because both router guides I have owned are not removable or adjustable from the head side.  Just the router side.

16 minutes ago, Brendon_t said:

Kev, with longer rods,  how would you even use it? Does the ft "head" move down the rods rather than the rod move through the router base? 

Both move.  I use the longer rods to attach a 2nd fence on the opposite side so it can straddle the work piece when doing mortises. 

44 minutes ago, Brendon_t said:

Kev, with longer rods,  how would you even use it? Does the ft "head" move down the rods rather than the rod move through the router base? 

Look at this video

On 11/1/2016 at 5:12 PM, Immortan D said:

Need help identifying the router and all the accessories this guy is using on this video:

 

 

Thanks!

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.