Recommended Posts

Posted

I'm going to actually do my first build journal vs just taunting one like I did with my bench, my new home office desk. Here is the quick SketchUp I've been working on the past few months.

IMG_0618.jpg

It's going to be built out of walnut, cool story behind the walnut... My dad cut it down from his farm about 10 years ago and has been air drying in his barn. I'd call it Common 1 & 2 grade. This weekend I was able to get the initial milling complete which was quite a challenge given how twisted and cupped some of the boards were. Lots of knots filled with epoxy today (tinted to walnut with TransTinit) and will need to add another layer tomorrow. I'm hopeful that after hanging in my shop for over a year and then sitting a full week+ before final dimensioning that it'll be stable. 

Few thoughts on construction plans. The sides and back will connect the top and bottom via long mortise and tenons, much like Cremona is doing the dividers on the Sofa Table build. I thought about doing dovetails for the drawer dividers but I don't want any exposed joinery, I'll do a mortise and tenons for those. The legs/shelves are not going to be "attached" to the top, instead the top will rest on the legs/shelves and aligned with table leaf pins.

  • Like 1
  • 1 month later...
Posted

Your decision to just go make another one is a good one.  I have saved a ton of time by not trying to fix something that could be better used as smaller parts for something else.  When making sets I will make one just how I want it and then use it as a story stick for its cousins. 

Posted

Well... I've been dreading how the base glue up would go and my dread is about to become reality. Not really, I'll save it for next weekend when I have an extra set of hands to help. Planning to use WestSystems Epoxy to give me plenty of time. 3b72a68c8ea60ec98865560711b41a80.jpg

Sent from my iPhone using Tapatalk

  • 2 weeks later...
Posted

Need some help. Finally decided what kind of joint to use to attached the shelves to the legs, now I'm trying to figure out a better way to cut them. 

Here's what it'll look like:

Campaign_Desk_-_SketchUp_Make_2016 (1).jpg

Here's what my test piece looks like:

IMG_1021 (1).jpgIMG_1023 (1).jpgIMG_1025 (1).jpg

I'm trying to figure out how to best cut the "tenon", the mortises are already done (used dovetail saw and chisel). For the test tenon i used a dovetail saw where i could and then use a chisel to slowly pair away until i got to my desired tenon thickness.

Anyone have a better/faster method to achieve the tenon as shown above?

 

  • Like 1
  • 8 years later...
Posted
7 hours ago, Terry Smelton said:

Any update on this? Reminds me of this kind of design, but with more storage.

sawhorse-desk-natural-polished-old-pine-

 

Would love to see the finished model!

@Terry Smelton, the OP hasn't visited since 2017, so I doubt there will be a response. 

If you have any particular questions or comments this style, I'm sure some of our other members will be happy to chime in.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   3 Members, 0 Anonymous, 29 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined