Recommended Posts

Posted

Why use a box joint dado rather than employ a portion of a fuller dado stack? Is there a *functional* reason to purchase a smaller set rather than (or even in addition to) the larger set?

Posted
Posted

The only thing I can imagine is that the finger joint sets must be single trick kits. The only way it beats a standard dado kit is if the shims are supplied to precisely balance the cut with the "leave" in a way that lets you cut multiple teeth at one time. Just noodling as I don't own one. 

Does not look like the box joint sets come with chipper blades either. 

Posted

It's a gimmick....fool proof, down and dirty one trick pony. It's basically the ease of set up for doing those two popular sizes mentioned below. Nothing a regular dado set cannot accomplish, but you're more limited with this set.

About this Joint Cutter Set
Freud has developed a method of creating perfectly square, flat-bottom box joints on a table saw without using a dado set or saw blade. This patent-pending innovation is easy to use: simply install the two 8-inch diameter, 5/8-inch arbor blades on a table saw with the blades back-to-back for 1/4-inch box joints, or face-to-face for 3/8-inch box joints. Combine this with Freud's Tico Hi-Density Carbide and Silver I.C.E. Coating, and you can make perfectly square and precise box joints quickly and cleanly the very first time. This set includes instructions for making box joints and building a box joint jig.

Edit- If you are really stuck on making 1/4 box joints the "box joint set" might be the best option. I don't think most normal dado stacks recommend just using the 2 outer blades, and would require atleast one 1/32 chipper between.

Posted

I think there is some convenience here. John, did your dado set come with two 1/4" and two 3/8" blades? I guess IF you do a lot of boxes, this might save you individually sourcing compatible blades and shims. No?

Posted

Only reason for me would be if I had 2 table saws and was leaving one set up to do box joints all the time.  In other words, I'll stick with a full stack..

Posted
3 minutes ago, Immortan D said:

Why would anyone need an 8" single purpose box joint blade? 6" should be more than enough. Or am I missing something?

On a ten inch table saw you have to crank quite high to use a six inch blade. The 8" features more teeth so will last a little longer and will be moving faster at the rim with the same arbor speed. The cutting arc will also vary with that shift.  Just thoughts as I don't know if there is a "better." 

Posted
19 minutes ago, C Shaffer said:

On a ten inch table saw you have to crank quite high to use a six inch blade. The 8" features more teeth so will last a little longer and will be moving faster at the rim with the same arbor speed. The cutting arc will also vary with that shift.  Just thoughts as I don't know if there is a "better." 

I'm not quite sure all those variables have a relevant impact on the quality of a box joint cut.

I think a 6" version with a price tag of >$60 would make more sense.

Posted

Forgive me if I repeat the reason others may have already stated; dados leave bat ears, the sets are FTG and do not.  Broad FTG cutters can have thier own issues once they are no longer brand new, tearout for example.  However, I use a Freud SD508 for this and the ears are so insignificant as to leave me disinterested in spending money on a dedicated set. 

I guess it boils down to whether you are happy with your dado set or not.  If not, I would use this as an excuse to buy a better quality dado stack as opposed to the one (or two) trick pony of a dedicated box joint set.

Posted
2 hours ago, Janello said:

Not all dado sets leave bat ears. Mine is FTG. But good point as some do.

Thanks for the clarification Janello.  I should have been more specific. Infinity's Dadonator and others leave perfectly flat bottoms ?

 

Posted

FWIW, I use one of these box joint sets because my small jobsite table saw can't take a full dado stack...sure I could probably buy a full stack and only use some of it...but the dedicated 2-blade box joint set is cheaper, is FTG, and works nicely for me.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 62 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined