Rex Edgar Posted June 8, 2016 Report Posted June 8, 2016 I happened on a project showcase, on this site, and the builder went into some detail as far as a Planer/Jointer machine, by a company called Hammer, that I have never heard of. They are part of the Felder group based in Austria. I had never heard of them either. The machine reviewed had a jointer capacity of 12" and the planer the same. I found and contacted the company and am going to see a man in my area who has one of their machines. Upon further research/surfing, I find that Baileigh, Jet, Grizzly, and Rikon are offerering machines similar to the European models. How come I've never heard of these European companies and does any one else have any experience with a combination planer/jointer or another machine from these European outfits. I like the idea of one footprint for two machines, but want to get more information before jumping in. The photo is one offered by Baileigh. Quote
jack English machine Posted June 8, 2016 Report Posted June 8, 2016 In the EU these are general call "over unders" and are way more popular in europe than North america. they date back to the late 1800s in the UK where machine as large as 36" were made. I have a british made patternmaker over under by Wadkin that is 28" wide that takes moulding knives up to 12" wide . The Hammers are great machines. here is my Wadkin here it is moulding Quote
Immortan D Posted June 8, 2016 Report Posted June 8, 2016 There is this lumberyard I visit from time to time, they have a Felder sliding table saw... Forget about the Jets or Powermatics, that thing is the real mccoy... I think it's bigger than my apartment Quote
mat60 Posted June 8, 2016 Report Posted June 8, 2016 Thats some machine...Sound like a jet starting up. Quote
mat60 Posted June 8, 2016 Report Posted June 8, 2016 Im thinking would slide the fence ahead to edj joint. Quote
jack English machine Posted June 8, 2016 Report Posted June 8, 2016 54 minutes ago, mat60 said: Im thinking would slide the fence ahead to edj joint. That's right the fences just slid back because on those types of models the tables flip / hinge up to access the planer and having the fence plate slide back facilitates that . The weak point on these cheaper models is the fence they make them lights so that they're not heavy to flip the tables up but of course that makes them somewhat flimsy and flexible something I personally dislike about cheaper jointers . Quote
Nestor Posted June 8, 2016 Report Posted June 8, 2016 That's right the fences just slid back because on those types of models the tables flip / hinge up to access the planer and having the fence plate slide back facilitates that . The weak point on these cheaper models is the fence they make them lights so that they're not heavy to flip the tables up but of course that makes them somewhat flimsy and flexible something I personally dislike about cheaper jointers . On my Hammer A3-31, the fence and tables flip up together, so it can be left wherever it is left. In the FWW video featuring the Jet, Rikon, and Grizzly, the Jet is very similar to the Hammer in terms of the switchover from jointer to planer. Sent from my iPad using Tapatalk Quote
Llama Posted June 9, 2016 Report Posted June 9, 2016 I think the Hammer and Felder machines are not mentioned or seen more often is due to the higher price, and this is 'Murica... and that Euro Kit is strange looking. The tablesaw I am looking at is near 5K, and close to that with the jointer/planer I am eyeing up. In the grand scheme of things, 10K for effectively three machines is nothing. But, most hobbyists can't afford to plunk that down at once. I first learned about the Hammer products through a review in Pop woodworking. So, the info is out there... Just not in your face like the other stuff is. Everyone knows Powermatic and those guys. Seeing that gold stuff in the ads is like seeing those milk ads. Enough already! We've seen it! I will add that when I ordered a catalog from Hammer, the day after the catalog arrived I got a call from a very nice guy asking letting me know that if I had any questions to contact him directly. I've called him just to check, and when he doesn't answer he always gets back asap. Always happy to answer any questions. Can't say that anything from Woodcraft has been that friendly. Quote
TerryMcK Posted June 9, 2016 Report Posted June 9, 2016 Yes this brand of machines are big in Europe but I certainly can't justify them. http://www.ukhammer.co.uk/ is the UK website and the US website is here http://www.hammerusa.com/ I also don't have the space for them (just look at the space requirements for that K4-Perform saw!!!) or 3 phase power (some of them have 400 volt motors in UK) that most but not all of them require. They are mainly industrial machines. But I guess if you have a mountain of 8 x 4 sheets to saw then they are the type of machine you need. I have an over/under Record Power (remember Record handtools?) jointer (AKA combination machine) and it works real well - similar in size to the Hammer A3-26 (10" wide) but that one has an aluminium fence. The only issue I have with the Record is you need to take the heavy cast iron fence off when it is converted to a planer (thicknesser mode in UK speak). They don't provide anywhere to store it so it ends up on the floor or a bench for the duration. The Record runs on 230volts single phase so is ideal for a home shop. Quote
Nestor Posted June 9, 2016 Report Posted June 9, 2016 Yes this brand of machines are big in Europe but I certainly can't justify them. http://www.ukhammer.co.uk/ is the UK website and the US website is here http://www.hammerusa.com/ I also don't have the space for them or 3 phase power that most but not all of them require. They are mainly industrial machines. I have an over/under Record Power (remember Record handtools?) jointer or AKA combination machine and it works real well - similar to the Hammer A3-26 10" wide but that has an aluminium fence. The only issue I have with the Record is you need to take the heavy cast iron fence off when it is converted to a planer (thicknesser mode in UK speak). They don't provide anywhere to store it so it ends up on the floor or a bench for the duration. The Record runs on 230volts single phase so is ideal for a home shop. The A3-31 runs on 230v , 30A. and the footprint differs little from the 8" jointer it replaces. I saved space by not having to drag out the planer and setting up on my bench. Sent from my iPhone using Tapatalk Quote
TerryMcK Posted June 9, 2016 Report Posted June 9, 2016 Have you the spiral cutter block or just the regular straight knives in the A3-31 ? I've heard lots of good things about the spiral cutters. Quote
Nestor Posted June 9, 2016 Report Posted June 9, 2016 2 hours ago, TerryMcK said: Have you the spiral cutter block or just the regular straight knives in the A3-31 ? I've heard lots of good things about the spiral cutters. I have the Hammer "silent power" cutting head as they call it. Does a great job. No visible tear-out and the shavings are noticeably smaller. As for the "silent" part, it's marketing IMO. I wouldn't use it without hearing protection and the noise from the DC renders it moot anyways. 1 Quote
jack English machine Posted June 9, 2016 Report Posted June 9, 2016 they really are a very old type machine and from my research John Sagar in the UK was the first to make them Dominion a machine maker in the UK supplied the navy and the schools under contract in the UK and made a monster combination machine called the "supreme elliott " that came with a 20" table saw and a 20" cross cut saw and 24" over under . At over 4000 lbs your shop fox mobile base is not going to make this mobile the heads on the older Kit were very large at 6" in diameter and often had skewed knives for a shearing cut. you can see the sheer angle the knife makes in the patented plate type heads like this on mine. the cutting action is very nice for HSS. 3 phase conversion is very easy today with a VFD and most 400 volt motor are dual voltage that can be wired for 220 volt from 400 and then run on household power Quote
mkrusen Posted June 9, 2016 Report Posted June 9, 2016 1 hour ago, jack English machine said: Dominion a machine maker in the UK supplied the navy and the schools under contract in the UK and made a monster combination machine called the "supreme elliott " that came with a 20" table saw and a 20" cross cut saw and 24" over under . Holy crap. Can you still find these things anywhere? That would be a pretty sweet setup to incorporate if you have the space. Quote
jack English machine Posted June 9, 2016 Report Posted June 9, 2016 3 minutes ago, mkrusen said: Holy crap. Can you still find these things anywhere? That would be a pretty sweet setup to incorporate if you have the space. It's your lucky day http://www.usedwoodworkingmachines.co.uk/catalog/index.php?main_page=product_info&products_id=225 Mind you it might sink the ship on its way over and cost of fortune in shipping costs . I've seen them turn up in Canada though Quote
mkrusen Posted June 9, 2016 Report Posted June 9, 2016 Good lord that thing is a beast. My wife has always supported my woodworking completely but this one might be a bit of a tough sell 1 Quote
jack English machine Posted June 9, 2016 Report Posted June 9, 2016 3 minutes ago, mkrusen said: Good lord that thing is a beast. My wife has always supported my woodworking completely but this one might be a bit of a tough sell Time for a new wife I think . No really I remember my newlywed wife asking me to pick her or the tools and I probably shouldn't of spent three days deciding . Quote
Nestor Posted June 9, 2016 Report Posted June 9, 2016 37 minutes ago, jack English machine said: It's your lucky day http://www.usedwoodworkingmachines.co.uk/catalog/index.php?main_page=product_info&products_id=225 Mind you it might sink the ship on its way over and cost of fortune in shipping costs . I've seen them turn up in Canada though I would like to add there is a vintage machines subforum in Canadian Woodworking. It seems quite popular. Quote
jack English machine Posted June 9, 2016 Report Posted June 9, 2016 21 minutes ago, Nestor said: I would like to add there is a vintage machines subforum in Canadian Woodworking. It seems quite popular. Is this site adverse to vintage machines ? Quote
Llama Posted June 9, 2016 Report Posted June 9, 2016 4 minutes ago, jack English machine said: Is this site adverse to vintage machines ? Not intentionally... There are people on here that are against working on their woodworking equipment though. Quote
drzaius Posted June 9, 2016 Report Posted June 9, 2016 3 minutes ago, jack English machine said: Is this site adverse to vintage machines ? I wouldn't say so, but there seems to be more interest in vintage on some of the other forums. I personally am not interested in owning any vintage stuff, but I sure like to see & read about what others do with it. I especially enjoy your videos of all that great old machinery you have in your shop. Quote
jack English machine Posted June 9, 2016 Report Posted June 9, 2016 23 minutes ago, drzaius said: I wouldn't say so, but there seems to be more interest in vintage on some of the other forums. I personally am not interested in owning any vintage stuff, but I sure like to see & read about what others do with it. I especially enjoy your videos of all that great old machinery you have in your shop. My intention here is not to advocate vintage Over new by excluding either. I've often found it helpful for people to understand where we have come from so we can determine where were going . As is often the case I find people believing that new technology is actually new when in fact almost everything had been done before . So whether you like to work on old machines or new machines having the knowledge of machines from past and present is invaluable to the craftsman . No matter how new or plug-and-play a machine is learning how to set up machines and what is better is always good for the craft. 2 Quote
Llama Posted June 9, 2016 Report Posted June 9, 2016 9 minutes ago, jack English machine said: No matter how new or plug-and-play a machine is learning how to set up machines and what is better is always good for the craft. This is the point that many people miss. 1 Quote
Nestor Posted June 9, 2016 Report Posted June 9, 2016 1 hour ago, jack English machine said: Is this site adverse to vintage machines ? Given I've never seen anyone here outspoken against vintage machines, I think it's just a lack of interest rather than antipathy. Many of the discussions at CWW seem to revolve around restoration challenges, which I suspect is an end in itself for many. Kind of like restoring an old car. Quote
jack English machine Posted June 9, 2016 Report Posted June 9, 2016 I think the workshop of brands and tools will alway be there. and building shrines for them is not a bad thing. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.