Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Trivets and Coasters from Scrap

Featured Replies

  • Popular Post

Long ago and far away I came up with an idea of how to use my small offcuts of nice material and get a jump on Christmas at the same time.  I just keep gluing similar length pieces (often requiring additional squaring up) together until I have a decent sized block. 

scrap-coasters (1).jpg

Then I mill it square and add more pieces.  This goes on throughout the year with the blocks and potential additional strips laying around wherever they stay out of the way.  When I am watching glue dry I add a few strips, collect more scrap, rinse and repeat.  One year for coasters I ended up with these:

scrap-coasters (7).jpg

I actually ended up with way too many ;-)

scrap-coasters (13).jpg

scrap-coasters (8).jpg

People really liked them (or told me they did because it was Christmas). 

I had also made some trivets but, in a different way. 

Cuttboard and Trivet (2).jpg

A few folks asked if I could make trivets the same way so here's my block that I started sometime last February . . .

Scrap Trivet (1).jpg

Trivets need air gaps in the surface.  My router table sled is just what I need for this.  I set the fence at 45 degrees and load up a 1/2" cove bit.

Scrap Trivet (2).jpg

The fence has a replaceable ZCI but, since this is a first attempt I add a sac-fence (scrap of plywood).

Scrap Trivet (3).jpg

My layout tool is a piece of tape with marks for the very precise positioning :rolleyes:.  I use the scrap I trimmed off to get a flat end for dimensional correctness.

Scrap Trivet (4).jpg

The plan is to use the first position, rotate the block 180 degrees and run it again.

Scrap Trivet (5).jpg

Move to the next position, rotate and run again.

Scrap Trivet (6).jpg

Etcetera . . .

Scrap Trivet (7).jpg

I clamp the blank to assure a clean exit.

Scrap Trivet (8).jpg

And here's the first of this year's trivets. 

Scrap Trivet (9).jpg

Scrap Trivet (10).jpg

I use mineral oil for a finish and trivets with years of use on them are still going strong.  I plan to do the same on these.  I do include a small bottle of mineral oil with the coasters, cuttingboards or trivets I give and instruct folks to refresh them if they appear thirsty.

 

great work as usual gee-dub, great idea for gifts and use of scraps. how big are they and how do you cut them from the block? bandsaw then drum sander?

Nice. I'm stealing this. I have other plans for coasters and such but this is a great way to deal with scraps. 

  • Author
17 minutes ago, treeslayer said:

great work as usual gee-dub, great idea for gifts and use of scraps. how big are they and how do you cut them from the block? bandsaw then drum sander?

There about 6" x 6" by 1/2".  I slice them off on the bandsaw at about 9/16" and drum sand them just as you imagine.  These are the coasters from the past again but, you get the idea.  Coasters are 4" x 4" x 1/2"

scrap-coasters (4).jpg

The more you post the more I learn! Thanks and keep it up.

Great idea for getting rid of scraps. I might be stealing your idea. My scrap pile is getting too big.

Sent from my iPad using Tapatalk

  • 2 weeks later...
  • Author

That oughta take care of stocking-stuffers for this year.

 

Scrap Trivet (11).jpg

Scrap Trivet (12).jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.