Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Grizzly Bandsaw Fence Mod

Featured Replies

  • Popular Post

From what I see in the forums there are a lot of Grizzly G0513 series saws out there.  Mine is a "tweener" saw the G0513X; made with cast iron wheels but, prior to the public outcry for cast iron trunnions (no longer made).

The fence that came with this saw is (read with a Billy Crystal / Miracle Max accent from 'the Princess Bride') mostly great.  The same basic fence is offered on some of their 14" saws as well but, vanishes at the 19" size and up.  The fact that someone would design a fence with a locking handle that interfered with the feed path when unlocked is a mystery.

This means that if you have material on the saw and want to move the fence, you have to move the material, unlock the fence, move, re-lock the fence and put the material back.  Doesn't sound like that big of a deal but, it fouled me up enough to do something about it . . . took about 30 minutes.

You can see by the angle of the block the handle screws into what I am talking about; it is higher than the table and to the right of the actual fence face(?).

Handel-off.jpg

I took a scrap piece of ash, drilled, counter-bored and rounded it off.  Found a bolt and washer that would do the trick.

route-back.jpg

Now the handle clears the material in the locked and open positions.

locked.jpgunlocked.jpg

If anyone else has had the issue, here's a quick fix.  Then again . . . maybe its only me :wacko:

Is it possible that block was originally installed upside down from the factory?  So you'd push down to release it, and pull up to lock it into place?

I have 2 of these saws with this issue..  I see a little switch in the very near future!  Thanks!

2 hours ago, wtnhighlander said:

Makes one wonder why the engineers that designed the fence didn't think of it.

The engineers that design the fence work in a different building from the engineers that design the handle for adjusting said fence.

Watch the videos, they never have stock on the table while adjusting the fence. I am sure they will say that is best practice. They likely even turn the saw off to adjust the fence. ;)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.