Popular Post Nestor Posted December 22, 2016 Popular Post Report Posted December 22, 2016 Was commissioned to make a pair of planter boxes as a barter for some sessions by my dog walker. But you know, being so close to Xmas, and all. The planters are straightforward but have a couple of interesting features I thought might be worth posting here. First, joinery is "glue-less" box joints. Second, the box joint fingers are proud by design and chamfered. Plans from Woodsmith. Half of the time for this project was spent making the box joint jig and getting it dialed in for proper fit. Test assembly. To mitigate rot, the planters are bottomless, holding a plastic liner. It's best to have the liners on hand first, as you have to build them to size. In this case, the liners have four small ribs that need to be trimmed away to fit flush. Note the unchamfered box joint fingers. Substituting a regular blade for the dadoes and realigning the box joint jig makes quick work of two sides of the chamfers. To finish them off, run the pieces along the rip fence. A 1/4" hole at corner holds a 2" dowel tapped in. No glue, no mess! Boxes themselves are done. The plans give options for wall mount brackets or a raised base. I think she will like them. Thanks for viewing. Sent from my iPad using Tapatalk 9 Quote
gee-dub Posted December 22, 2016 Report Posted December 22, 2016 I am sure they will be a hit. A cut above what the doctor ordered I'll bet. Quote
mat60 Posted December 22, 2016 Report Posted December 22, 2016 Very nice and I like the box joints. She will like them. Quote
xxdabroxx Posted December 23, 2016 Report Posted December 23, 2016 Very nice, did you use fence boards for them? I made an Adirondack chair for my dad out of fence material. Quote
Nestor Posted December 23, 2016 Author Report Posted December 23, 2016 Very nice, did you use fence boards for them? I made an Adirondack chair for my dad out of fence material. Not sure if it was fence board. It came as 16ft 1X8's. Surprisingly expensive though. Sent from my iPhone using Tapatalk Quote
Sac Posted December 23, 2016 Report Posted December 23, 2016 I love the extended/beveled box joints. Really need to get my box joint jig built.. Quote
Isaac Posted December 23, 2016 Report Posted December 23, 2016 3 hours ago, Nestor said: Not sure if it was fence board. It came as 16ft 1X8's. Surprisingly expensive though. Sent from my iPhone using Tapatalk That sounds like a board for deck trim. 16' is a pretty odd length for a material designated for fencing. Fences are never that tall, and vertical posts are nearly always spaced closer than that as well. Quote
Tpt life Posted December 23, 2016 Report Posted December 23, 2016 7 minutes ago, Isaac Gaetz said: That sounds like a board for deck trim. 16' is a pretty odd length for a material designated for fencing. Fences are never that tall, and vertical posts are nearly always spaced closer than that as well. You can cut it... 1 Quote
Isaac Posted December 23, 2016 Report Posted December 23, 2016 1 hour ago, C Shaffer said: You can cut it... Of course you can, obviously the wood doesn't care what you call it or use it for, I was just commenting that it probably isn't marketed for fencing at that length. It is a ledger/trim board. I see them used for the backs of built in seating on decks and such. Quote
Elroy Skimms Posted January 2, 2017 Report Posted January 2, 2017 On 12/22/2016 at 6:11 PM, Nestor said: Substituting a regular blade for the dadoes and realigning the box joint jig makes quick work of two sides of the chamfers. To finish them off, run the pieces along the rip fence. That right there was worth the price of admission for me. I've tried a couple of different methods to add chamfers to box joint fingers and so far the best looking solution has been time with a file and patience. I like your method much better. Patience is a virtue that I lack. -E Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.