Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

arm-r-seal temp

Featured Replies

Does GF arm-r-seal have a minimum application temperature? My un-heated shop is in the low to mid 50s all weekend and I generally don't heat it. It's also raining and fairly high humidity, so I realize I would have to wait longer than the normal 2-3 hours between coats...Just want to make sure it's ok though and won't fail to cure entirely at these temps, and I can't seem to find anything online.

I've found, in my limited experience, that the humidity has more to do with the drying time than the temps. However, I've never applied it when it was below 50*. 

Not sure about this one.  Maybe give General finishes a call. 

let us know what they say/

I agree with Coop...humidity is a bigger factor in drying times than temperature...but cooler air will slow it down some.  Just make sure your previous coat is totally dry before you move on to a subsequent coat and you'll be fine.  Give it a full 24 hours or more to be on the safe side.  I've used ARS in the 50s before.  No issues other than impatience on my part.

  • Author
  • Popular Post
Not sure about this one.  Maybe give General finishes a call. 

let us know what they say/

I haven't made a phone call in years. :) Not gonna start now

Sent from my Nexus 5 using Tapatalk

Yeah,  you're good to apply in the weather were getting.  As Steve says.  Use a piece of scrap and finish with it that way you can test the cure on the scrap without touching your work piece.

I give Arm-R-Seal 36 hours to dry in 50-60F 25-30% humidity.  Even in the summer when it's 65F and 50% I give it at least 24 hours.

  • Author

Thanks guys. The biggest problem is the the piece is big enough that I can only really finish one side at a time, so the weather just makes the slow process even slower.

  • Author
4 hours ago, Brendon_t said:

Yeah,  you're good to apply in the weather were getting.  As Steve says.  Use a piece of scrap and finish with it that way you can test the cure on the scrap without touching your work piece.

How long would you be waiting in this weather? I didn't think to do a test piece for the underside, will have to do one for the top and from every step going forward...maybe I'll just wait 24 hours to be sure, would hate to ruin it.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.