Recommended Posts

Posted

Seriously, what blower motors are they putting in these things?  Why aren't they using the exact same setup for their own small DC system?

Now my DC is pretty simple/archaic.  It's simply a 1 HP blower mounted onto a 55 gallon drum, exhausting out through a filter bag.  It pulls most things just fine.  There's weather stripping under the lid, and the suction of the blower keeps the lid down tight when it's running.  

Now today I hook up the Planer to the 4" hose, and run the planer. I don't run the DC while using the planer, as I figured the planer blower will do all the work.   I start noticing some sawdust dancing through the air.  I look over, and the lid (with the motor and Blower) is bouncing around on top of the drum.  

Now I know my filter bag might need to be emptied, but it's not that full, yet the planer is able to lift a 40 lb drum lid, while flowing out through the filter bag.   These things are impressive. 

Posted
24 minutes ago, Randy said:

Why don't you run the DC when you are using the planer? 

+1

 I know when I don't have the DC on with the planer I get dust coming out of the system and not ending in the collection bag, I guessing it takes the path of least resistance.

Posted

Well, I will be running the DC from now on.    It seemed to work fine on small boards, but this time I ran a bunch of bigger stuff, so the machine had time to run longer.  Had some unfounded fear of the DW overpowering the DC and hurting it somehow.  Oh, and I trip a lot of breakers here, so there's that too. 

13 hours ago, RichardA said:

The blower on the 735 will without assistance, send chips at least 15 feet.  Proof:Saw dust in the front of the truck.

102_1369.JPG

The fun part of that is driving up and down the highway to clean out your bed. 

  • Like 1
  • 2 weeks later...
Guest Randy
Posted

If you have a dust collector the planet should always be run with the DC conected and on unless you can plane outside where it doesn't matter if there is sawdust everywhere (like in the back of your truck I guess). I never even considered owning a planet till I had a DC. 

Posted
15 hours ago, Randy said:

If you have a dust collector the planet should always be run with the DC conected and on unless you can plane outside where it doesn't matter if there is sawdust everywhere (like in the back of your truck I guess). I never even considered owning a planet till I had a DC. 

That read's so well when you assume the auto correct's are actually correct.

I too want a planet. 

  • Like 2
Posted

After many attempts to get it to work, I cannot run the planer and the DC at the same time.  This house is a rental, and the entire garage is on one circuit.  Running the Dc and the planer just trips the breakers.   Owner won't go for rewiring the electric either.  Oh well.  Some C clamps to keep the lid on the barrel will do the trick for now. 

Posted
On 4/18/2017 at 7:54 AM, Marmotjr said:

 

I too want a planet. 

Have you picked out the one you want.  I'm pretty sure it isn't this one, there are to many fighting for this one.

  • Like 1
Posted
After many attempts to get it to work, I cannot run the planer and the DC at the same time.  This house is a rental, and the entire garage is on one circuit.  Running the Dc and the planer just trips the breakers.   Owner won't go for rewiring the electric either.  Oh well.  Some C clamps to keep the lid on the barrel will do the trick for now. 

Any chance you could run an extension cord from another circuit in the house, just while doing this operation?

Posted

I could, but...... I also can't run the DC and the Table saw, the space heater and anything, and a couple other combinations (I just love losing power mid cut).    So I'd be tempted to do it for all of those.  Plus, it's noisy enough inside the house when I'm running the tools, especially the planer, that leaving a door cracked would just make it worse.     The planer is loud enough that you have trouble hearing the TV in the living room. 

The C clamp method seems to be working fine. 

Posted

Yikes.  That's a tough situation.  If I were in that situation....I'd try to find a way to run a (heavy duty) extension cord to another location in the house that's on a different circuit, and run the DC on that.  The DC should always be able to run.

Space heaters take a lot of juice, but I would think that's something that you can run ahead of time (maybe on a timer) and once the shop is at temp, shut it off in lieu of power tools.

 

 

  • Like 1
Posted
17 hours ago, Jfitz said:

Yikes.  That's a tough situation.  If I were in that situation....I'd try to find a way to run a (heavy duty) extension cord to another location in the house that's on a different circuit, and run the DC on that.  The DC should always be able to run.

Space heaters take a lot of juice, but I would think that's something that you can run ahead of time (maybe on a timer) and once the shop is at temp, shut it off in lieu of power tools.

 

 

It's not too big of a deal if I remember to turn off the space heater.  Running a cord for the DC really isn't an option, just not practical.   But I make it work though

11 hours ago, K Cooper said:

I bought mine at family thrift and remodeled it.

IMG_0336.thumb.JPG.929f28387e9530cbe0338666db603903.JPG

I used to do that, but directly from the port.  Now I just have a cyclone separator in between the planer and the filter bag. 

Guest Randy
Posted

@Marmotjr To speak more directly to your initial post about the lid of your collector bin being raised off the top . . . My guess is that the filter bag you have attached just doesn't permit enough air to flow back out into the shop (not a life changing conclusion, but . . . ) The impeller on the Dewalt 735 does move a lot of air. It has to in order to push larger chips out the dust port.

Because you didn't have the dust collector on and only the planer blower, you bypassed the drum with the dust and it just all went into the bag. I still have a bag kit that I either bought or came with the planer that is meant to be attached to the dust port and the open end fits over a drum or garbage can. I can hunt it up and read the instructions if it is of interest to you. It is made specifically for this Dewalt planer and allegedly to merely use the impeller to force the dust into a barrel over which the bag is installed. I assume the bag material is meant to be the filter for exiting air. Don't know if it works, but it was designed to be used in place of a dust collector.

Are you interested? If so, I will see if I still have it. I did awhile back. Someone on another forum was looking for one and I had it then. I think we determined that it wasn't sold anymore, even online.

Lucky you don't have to collect dust from the whole "planet".

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   4 Members, 0 Anonymous, 50 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined