Pwk5017 Posted April 3, 2017 Report Posted April 3, 2017 Couldnt find much info on the subject, probably because this isnt a commonly owned tool, but does anyone have a favorite sharpening system for their hollow chisels? I just picked up a PM 719 with a bunch of chisels yesterday. The 5+ new in box chisels were an added bonus when i opened up the cabinet compartment and saw them in a coffee can! Somehow all of them are still in cosmoline and unopened boxes after 10+ years. Ive read the PM chisels are ok and nothing to write home about, which leads me to believe i will need to touch them up now or shortly after using them. I see rockler sells a cone kit, but marc wasnt in love with the kit in his mortiser video. Lee valley sells a set of cones, but they are tailored to their specific line of japanese chisels. Generic sharpening set someone recommends? Alternatively, i could try and sell my chisel set and go buy 2 of the japanese chisels from lee valley with their sharpening cones. I have a DF500, so i really only want this machine for 1/2"+ tenons. I dont need a 1/4", 3/8", 1/2", 5/8", 3/4", and whatever other dimension chisel set. Quote
Pwk5017 Posted April 3, 2017 Author Report Posted April 3, 2017 Yeah, but it looks like those sharpening cones arent universal. The Lee Valley ones state they are specific to the japanese chisels. Quote
gee-dub Posted April 3, 2017 Report Posted April 3, 2017 I do the flat sides on my regular sharpening stones. I do the inside of the chisel with the diamond cones that are available from several suppliers. Quote
pkinneb Posted April 3, 2017 Report Posted April 3, 2017 1 hour ago, gee-dub said: I do the flat sides on my regular sharpening stones. I do the inside of the chisel with the diamond cones that are available from several suppliers. This is my process as well. Quote
wtnhighlander Posted April 3, 2017 Report Posted April 3, 2017 Wonder what is different about the Japanese chisels? Angle of the cone, maybe? Quote
Tom King Posted April 3, 2017 Report Posted April 3, 2017 I never cared for the old Delta sharpener. I don't remember running into a problem with th LV sharpener on any I have. A die grinder works just fine. The outside is the important part. I keep an x fine diamond paddle handy for touch up on the machine for long runs. Quote
Tom King Posted April 4, 2017 Report Posted April 4, 2017 Do what you need to so the bit seats all the way home in the chuck-cut, grind, or super glue little washers on the end of the bit. All machines don't have the same geometry. It will save setup time, and chisels Star M bits come long Quote
Pwk5017 Posted April 4, 2017 Author Report Posted April 4, 2017 4 hours ago, wtnhighlander said: Wonder what is different about the Japanese chisels? Angle of the cone, maybe? This was my main question, 'what cones do I buy?'. I have Shapton stones up to 8,000 to handle polishing the flat outsides of the chisels, but they won't help when it comes time to hone the inner cone. I'm either going to buy the Lee valley cones or the rockler set. Quote
wtnhighlander Posted April 4, 2017 Report Posted April 4, 2017 This was my main question, 'what cones do I buy?'. I have Shapton stones up to 8,000 to handle polishing the flat outsides of the chisels, but they won't help when it comes time to hone the inner cone. I'm either going to buy the Lee valley cones or the rockler set. I just assumed the angle was different. Maybe there is something in the composition of the steel that requires a different abrasive. But like Tom said, the flat outside is most critical to the function. Quote
gee-dub Posted April 4, 2017 Report Posted April 4, 2017 I have the Rockler cones and they seem to work OK. There is definite initial wear on the coarse stone but, I am used to seeing this happen on some diamond products. The coarse stone still cuts so it doesn't wear to the point of non-function like some other products I have used (not cones). They were half the current price when I bought them and they still work. If Rockler wasn't having some sort of sale I would be tempted to check for compatibility and go with the Lee Valleys. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.