Recommended Posts

Posted

Any if you builders have experience with the peel and stick, self adhesive vinyl floor 'planks' that look like hardwood flooring?

I put some in my son's hobby railroad shed earlier this spring, and they aren't sticking very well. Buckling at the ends, mostly.

 

Any suggestions?

  • Like 1
Posted
Any if you builders have experience with the peel and stick, self adhesive vinyl floor 'planks' that look like hardwood flooring?

I put some in my son's hobby railroad shed earlier this spring, and they aren't sticking very well. Buckling at the ends, mostly.

 

Any suggestions?

What did you place them down on?

 

Sent from my SM-G930T using Tapatalk

 

 

Posted

Ross does the shed go through weather swings?  I don't know if that matters, just spit balling.  I did a peel and stick tile floor in my office.  It lasted about 7 years, mostly it started to degrade at the the corners because of the wheels on the office chair rolling over it.

Posted

I just installed a couple hundred square feet of the stuff in our rental property.  There are different kinds though, the kind I used had the "grip strip" that adheres each tile to the next and the floor still floats.  It worked really well, though the style I used was in bathrooms and the kitchen and was a tile pattern.  The seams were in the faux grout lines and it got pretty difficult to line them up perfectly, there were some gaps that I used a color matched caulk to hide.

I went with the "grip strip" because I read a few too many negative reviews of the true peal and stick, stick directly to the subfloor style flooring.  A lot of complaints of pealing and lifting at the seams and edges.

Posted

First, yes the weather has changed since first laying the floor. It gets worse as it warms up.

 

And no primer, it was not mentioned in the DIY instructions that came with the product.

 

I suspect I am stuck with buckles, or gaps. This stuff is just to temperature sensitive.

Posted

I'll be ripping the carpet out of our 5th wheel this spring & putting in vinyl plank flooring. I've been doing tons of research & it seems like the peel & stick tiles have lots of problems. A good bond is dependent on a perfectly prepared substrate & no extreme temps.

I think I'll be going with the click together floating type.

  • Like 2
Posted

My understanding is the click together type is the best of the few types.

41 minutes ago, wdwerker said:

Be aware that the click together laminate flooring is brutal on your saw blades !

This stuff is actually cut with a utility knife, it's not traditional laminate.  That said, I bet I went through thirty razor blades, and there is a very high risk of accidents.  Halfway through I was wishing for my tablesaw...though power would make a mess of this stuff and further interfere with the adhesive.

Posted
58 minutes ago, wdwerker said:

Be aware that the click together laminate flooring is brutal on your saw blades !

Just to be clear, I was referring to vinyl flooring. I find it to be much nicer to look at & walk on than laminate.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   0 Members, 0 Anonymous, 41 Guests (See full list)

    • There are no registered users currently online
  • Forum Statistics

    32k
    Total Topics
    437.5k
    Total Posts
  • Member Statistics

    26,007
    Total Members
    3,644
    Most Online
    FurniCore
    Newest Member
    FurniCore
    Joined